mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-18 12:05:11 +00:00
37 lines
1.4 KiB
C
37 lines
1.4 KiB
C
|
|
/*
|
|
Pin assigments for Radio Sensors board revision 2.3
|
|
using MCU AtMega128rfa1
|
|
*/
|
|
|
|
#define ISP_1 PB1 /* SCK */
|
|
#define ISP_2 PB2 /* MOSI */
|
|
#define ISP_3 PB3 /* MISO */
|
|
|
|
#define LED_YELLOW PE3 /* 1k pullup to Vcc */
|
|
#define LED_RED PE4 /* 1k pullup to Vcc */
|
|
#define USB_PWR PB5 /* High if FTDI TTL-USB cable sources */
|
|
#define P0 PD2 /* Pulse count input. Pullup via jumper */
|
|
#define P1 PD3 /* Pulse count input via optional Comparator */
|
|
#define PWR_1 PE7 /* Programmable power pin Vcc via P-FET */
|
|
|
|
#define AV_IN PF0 /* V_IN ADC input. 100k/1M volt. divider */
|
|
#define A1 PF1 /* A1 ADC input. 100k/300k volt. divider */
|
|
#define A2 PF2 /* A2 ADC input 100k/300k volt. divider */
|
|
#define A3 PF3 /* Light sensor A3 ADC input 100k/100k volt. divider */
|
|
#define A3_PWR PF4 /* Light sensor power A3_PWR */
|
|
|
|
#define RX0 PE0 /* RX UART0 -- FTDI TTL-USB cable */
|
|
#define TX0 PE1 /* TX UART0 -- FTDI TTL-USB cable */
|
|
|
|
#define OW_BUS_0 PD7 /* One-Wire bus w temp/ID Pulled Up. Separate Vcc */
|
|
#define OW_BUS_1 PD6 /* One-Wire bus extra Pulled Up. Separate Vcc */
|
|
|
|
/* AVR ISP standard connected */
|
|
/* 16 MHz xtal */
|
|
/* RTC 32.768 Hz xtal */
|
|
|
|
/*Optional HIH610 connected on SPI */
|
|
#define HUM_PWR PE2 /* Power pin for HIH6130 also to ena. HIH 6130 Alarm mode */
|
|
|