mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-05 19:07:41 +00:00
335 lines
9.7 KiB
C
335 lines
9.7 KiB
C
/*
|
|
* Copyright (c) 2007, Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* AVR-specific rtimer code
|
|
* Defaults to Timer3 for those ATMEGAs that have it.
|
|
* If Timer3 not present Timer1 will be used.
|
|
* \author
|
|
* Fredrik Osterlind <fros@sics.se>
|
|
* Joakim Eriksson <joakime@sics.se>
|
|
*/
|
|
|
|
/* OBS: 8 seconds maximum time! */
|
|
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
#include <stdio.h>
|
|
|
|
#include "sys/energest.h"
|
|
#include "sys/rtimer.h"
|
|
#include "rtimer-arch.h"
|
|
|
|
#if defined(__AVR_ATmega1284P__)
|
|
#define ETIMSK TIMSK3
|
|
#define ETIFR TIFR3
|
|
#define TICIE3 ICIE3
|
|
|
|
//Has no 'C', so we just set it to B. The code doesn't really use C so this
|
|
//is safe to do but lets it compile. Probably should enable the warning if
|
|
//it is ever used on other platforms.
|
|
//#warning no OCIE3C in timer3 architecture, hopefully it won't be needed!
|
|
|
|
#define OCIE3C OCIE3B
|
|
#define OCF3C OCF3B
|
|
#endif
|
|
|
|
#if defined(__AVR_ATmega1281__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega128RFA1__) || defined(__AVR_ATmega128RFR2__) || defined(__AVR_ATmega256RFR2__)
|
|
#define ETIMSK TIMSK3
|
|
#define ETIFR TIFR3
|
|
#define TICIE3 ICIE3
|
|
#endif
|
|
|
|
#if defined(__AVR_ATmega328P__) || defined(__AVR_ATmega644__)
|
|
#define TIMSK TIMSK1
|
|
#define TICIE1 ICIE1
|
|
#define TIFR TIFR1
|
|
#endif
|
|
|
|
/* Track flow through rtimer interrupts*/
|
|
#if DEBUGFLOWSIZE&&0
|
|
extern uint8_t debugflowsize,debugflow[DEBUGFLOWSIZE];
|
|
#define DEBUGFLOW(c) if (debugflowsize<(DEBUGFLOWSIZE-1)) debugflow[debugflowsize++]=c
|
|
#else
|
|
#define DEBUGFLOW(c)
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
#if defined(TCNT3) && RTIMER_ARCH_PRESCALER
|
|
ISR (TIMER3_COMPA_vect) {
|
|
DEBUGFLOW('/');
|
|
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
|
|
|
/* Disable rtimer interrupts */
|
|
ETIMSK &= ~((1 << OCIE3A) | (1 << OCIE3B) | (1 << TOIE3) |
|
|
(1 << TICIE3) | (1 << OCIE3C));
|
|
|
|
#if RTIMER_CONF_NESTED_INTERRUPTS
|
|
/* Enable nested interrupts. Allows radio interrupt during rtimer interrupt. */
|
|
/* All interrupts are enabled including recursive rtimer, so use with caution */
|
|
sei();
|
|
#endif
|
|
|
|
/* Call rtimer callback */
|
|
rtimer_run_next();
|
|
|
|
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
|
DEBUGFLOW('\\');
|
|
}
|
|
|
|
#elif RTIMER_ARCH_PRESCALER
|
|
#warning "No Timer3 in rtimer-arch.c - using Timer1 instead"
|
|
ISR (TIMER1_COMPA_vect) {
|
|
DEBUGFLOW('/');
|
|
TIMSK &= ~((1<<TICIE1)|(1<<OCIE1A)|(1<<OCIE1B)|(1<<TOIE1));
|
|
|
|
rtimer_run_next();
|
|
DEBUGFLOW('\\');
|
|
}
|
|
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rtimer_arch_init(void)
|
|
{
|
|
#if RTIMER_ARCH_PRESCALER
|
|
/* Disable interrupts (store old state) */
|
|
uint8_t sreg;
|
|
sreg = SREG;
|
|
cli ();
|
|
|
|
#ifdef TCNT3
|
|
/* Disable all timer functions */
|
|
ETIMSK &= ~((1 << OCIE3A) | (1 << OCIE3B) | (1 << TOIE3) |
|
|
(1 << TICIE3) | (1 << OCIE3C));
|
|
/* Write 1s to clear existing timer function flags */
|
|
ETIFR |= (1 << ICF3) | (1 << OCF3A) | (1 << OCF3B) | (1 << TOV3) |
|
|
(1 << OCF3C);
|
|
|
|
/* Default timer behaviour */
|
|
TCCR3A = 0;
|
|
TCCR3B = 0;
|
|
TCCR3C = 0;
|
|
|
|
/* Reset counter */
|
|
TCNT3 = 0;
|
|
|
|
#if RTIMER_ARCH_PRESCALER==1024
|
|
TCCR3B |= 5;
|
|
#elif RTIMER_ARCH_PRESCALER==256
|
|
TCCR3B |= 4;
|
|
#elif RTIMER_ARCH_PRESCALER==64
|
|
TCCR3B |= 3;
|
|
#elif RTIMER_ARCH_PRESCALER==8
|
|
TCCR3B |= 2;
|
|
#elif RTIMER_ARCH_PRESCALER==1
|
|
TCCR3B |= 1;
|
|
#else
|
|
#error Timer3 PRESCALER factor not supported.
|
|
#endif
|
|
|
|
#elif RTIMER_ARCH_PRESCALER
|
|
/* Leave timer1 alone if PRESCALER set to zero */
|
|
/* Obviously you can not then use rtimers */
|
|
|
|
TIMSK &= ~((1<<TICIE1)|(1<<OCIE1A)|(1<<OCIE1B)|(1<<TOIE1));
|
|
TIFR |= (1 << ICF1) | (1 << OCF1A) | (1 << OCF1B) | (1 << TOV1);
|
|
|
|
/* Default timer behaviour */
|
|
TCCR1A = 0;
|
|
TCCR1B = 0;
|
|
|
|
/* Reset counter */
|
|
TCNT1 = 0;
|
|
|
|
/* Start clock */
|
|
#if RTIMER_ARCH_PRESCALER==1024
|
|
TCCR1B |= 5;
|
|
#elif RTIMER_ARCH_PRESCALER==256
|
|
TCCR1B |= 4;
|
|
#elif RTIMER_ARCH_PRESCALER==64
|
|
TCCR1B |= 3;
|
|
#elif RTIMER_ARCH_PRESCALER==8
|
|
TCCR1B |= 2;
|
|
#elif RTIMER_ARCH_PRESCALER==1
|
|
TCCR1B |= 1;
|
|
#else
|
|
#error Timer1 PRESCALER factor not supported.
|
|
#endif
|
|
|
|
#endif /* TCNT3 */
|
|
|
|
/* Restore interrupt state */
|
|
SREG = sreg;
|
|
#endif /* RTIMER_ARCH_PRESCALER */
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rtimer_arch_schedule(rtimer_clock_t t)
|
|
{
|
|
#if RTIMER_ARCH_PRESCALER
|
|
/* Disable interrupts (store old state) */
|
|
uint8_t sreg;
|
|
sreg = SREG;
|
|
cli ();
|
|
DEBUGFLOW(':');
|
|
#ifdef TCNT3
|
|
/* Set compare register */
|
|
OCR3A = t;
|
|
/* Write 1s to clear all timer function flags */
|
|
ETIFR |= (1 << ICF3) | (1 << OCF3A) | (1 << OCF3B) | (1 << TOV3) |
|
|
(1 << OCF3C);
|
|
/* Enable interrupt on OCR3A match */
|
|
ETIMSK |= (1 << OCIE3A);
|
|
|
|
#elif RTIMER_ARCH_PRESCALER
|
|
/* Set compare register */
|
|
OCR1A = t;
|
|
TIFR |= (1 << ICF1) | (1 << OCF1A) | (1 << OCF1B) | (1 << TOV1);
|
|
TIMSK |= (1 << OCIE1A);
|
|
|
|
#endif
|
|
|
|
/* Restore interrupt state */
|
|
SREG = sreg;
|
|
#endif /* RTIMER_ARCH_PRESCALER */
|
|
}
|
|
|
|
#if RDC_CONF_MCU_SLEEP
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
rtimer_arch_sleep(rtimer_clock_t howlong)
|
|
{
|
|
/* Deep Sleep for howlong rtimer ticks. This will stop all timers except
|
|
* for TIMER2 which can be clocked using an external crystal.
|
|
* Unfortunately this is an 8 bit timer; a lower prescaler gives higher
|
|
* precision but smaller maximum sleep time.
|
|
* Here a maximum 128msec (contikimac 8Hz channel check sleep) is assumed.
|
|
* The rtimer and system clocks are adjusted to reflect the sleep time.
|
|
*/
|
|
#include <avr/sleep.h>
|
|
#include <dev/watchdog.h>
|
|
uint32_t longhowlong;
|
|
#if AVR_CONF_USE32KCRYSTAL
|
|
/* Save TIMER2 configuration if clock.c is using it */
|
|
uint8_t savedTCNT2=TCNT2, savedTCCR2A=TCCR2A, savedTCCR2B = TCCR2B, savedOCR2A = OCR2A;
|
|
#endif
|
|
cli();
|
|
watchdog_stop();
|
|
set_sleep_mode(SLEEP_MODE_PWR_SAVE);
|
|
|
|
/* Set TIMER2 clock asynchronus from external source, CTC mode */
|
|
ASSR |= (1 << AS2);
|
|
TCCR2A =(1<<WGM21);
|
|
/* Set prescaler and TIMER2 output compare register */
|
|
#if 0 //Prescale by 1024 - 32 ticks/sec, 8 seconds max sleep
|
|
TCCR2B =((1<<CS22)|(1<<CS21)|(1<<CS20));
|
|
longhowlong=howlong*32UL;
|
|
#elif 0 // Prescale by 256 - 128 ticks/sec, 2 seconds max sleep
|
|
TCCR2B =((1<<CS22)|(1<<CS21)|(0<<CS20));
|
|
longhowlong=howlong*128UL;
|
|
#elif 0 // Prescale by 128 - 256 ticks/sec, 1 seconds max sleep
|
|
TCCR2B =((1<<CS22)|(0<<CS21)|(1<<CS20));
|
|
longhowlong=howlong*256UL;
|
|
#elif 0 // Prescale by 64 - 512 ticks/sec, 500 msec max sleep
|
|
TCCR2B =((1<<CS22)|(0<<CS21)|(0<<CS20));
|
|
longhowlong=howlong*512UL;
|
|
#elif 1 // Prescale by 32 - 1024 ticks/sec, 250 msec max sleep
|
|
TCCR2B =((0<<CS22)|(1<<CS21)|(1<<CS20));
|
|
longhowlong=howlong*1024UL;
|
|
#elif 0 // Prescale by 8 - 4096 ticks/sec, 62.5 msec max sleep
|
|
TCCR2B =((0<<CS22)|(1<<CS21)|(0<<CS20));
|
|
longhowlong=howlong*4096UL;
|
|
#else // No Prescale - 32768 ticks/sec, 7.8 msec max sleep
|
|
TCCR2B =((0<<CS22)|(0<<CS21)|(1<<CS20));
|
|
longhowlong=howlong*32768UL;
|
|
#endif
|
|
OCR2A = longhowlong/RTIMER_ARCH_SECOND;
|
|
|
|
/* Reset timer count, wait for the write (which assures TCCR2x and OCR2A are finished) */
|
|
TCNT2 = 0;
|
|
while(ASSR & (1 << TCN2UB));
|
|
|
|
/* Enable TIMER2 output compare interrupt, sleep mode and sleep */
|
|
TIMSK2 |= (1 << OCIE2A);
|
|
SMCR |= (1 << SE);
|
|
sei();
|
|
ENERGEST_OFF(ENERGEST_TYPE_CPU);
|
|
if (OCR2A) sleep_mode();
|
|
//...zzZZZzz...Ding!//
|
|
|
|
/* Disable sleep mode after wakeup, so random code cant trigger sleep */
|
|
SMCR &= ~(1 << SE);
|
|
|
|
/* Adjust rtimer ticks if rtimer is enabled. TIMER3 is preferred, else TIMER1 */
|
|
#if RTIMER_ARCH_PRESCALER
|
|
#ifdef TCNT3
|
|
TCNT3 += howlong;
|
|
#else
|
|
TCNT1 += howlong;
|
|
#endif
|
|
#endif
|
|
ENERGEST_ON(ENERGEST_TYPE_CPU);
|
|
|
|
#if AVR_CONF_USE32KCRYSTAL
|
|
/* Restore clock.c configuration */
|
|
cli();
|
|
TCCR2A = savedTCCR2A;
|
|
TCCR2B = savedTCCR2B;
|
|
OCR2A = savedOCR2A;
|
|
TCNT2 = savedTCNT2;
|
|
sei();
|
|
#else
|
|
/* Disable TIMER2 interrupt */
|
|
TIMSK2 &= ~(1 << OCIE2A);
|
|
#endif
|
|
watchdog_start();
|
|
|
|
/* Adjust clock.c for the time spent sleeping */
|
|
longhowlong=CLOCK_CONF_SECOND;
|
|
longhowlong*=howlong;
|
|
clock_adjust_ticks(longhowlong/RTIMER_ARCH_SECOND);
|
|
|
|
}
|
|
#if !AVR_CONF_USE32KCRYSTAL
|
|
/*---------------------------------------------------------------------------*/
|
|
/* TIMER2 Interrupt service */
|
|
|
|
ISR(TIMER2_COMPA_vect)
|
|
{
|
|
// TIMSK2 &= ~(1 << OCIE2A); //Just one interrupt needed for waking
|
|
}
|
|
#endif /* !AVR_CONF_USE32KCRYSTAL */
|
|
#endif /* RDC_CONF_MCU_SLEEP */
|
|
|