Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-08 23:08:29 +00:00
Code Issues Projects Releases Wiki Activity
7fa2ce1329
contiki/platform/cc2530dk/contiki-conf.h
Simon Duquennoy 248301a041 Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00

284 lines
7.6 KiB
C
Raw Blame History

#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#include "8051def.h"
#include "sys/cc.h"
#include <string.h>
/* Include Project Specific conf */
#ifdef PROJECT_CONF_H
#include "project-conf.h"
#endif /* PROJECT_CONF_H */
/*
* Build for SmartRF05EB+CC2530EM by default.
* This define needs to have its final value before inclusion of models.h
*/
#ifndef MODELS_CONF_CC2531_USB_STICK
#define MODELS_CONF_CC2531_USB_STICK 0
#endif
#include "models.h"
/*
* Define this as 1 to poll the etimer process from within main instead of from
* the clock ISR. This reduces the ISR's stack usage and may prevent crashes.
*/
#ifndef CLOCK_CONF_STACK_FRIENDLY
#define CLOCK_CONF_STACK_FRIENDLY 1
#endif
#ifndef STACK_CONF_DEBUGGING
#define STACK_CONF_DEBUGGING 0
#endif
/* Energest Module */
#ifndef ENERGEST_CONF_ON
#define ENERGEST_CONF_ON 0
#endif
/* Verbose Startup? Turning this off saves plenty of bytes of CODE in HOME */
#ifndef STARTUP_CONF_VERBOSE
#define STARTUP_CONF_VERBOSE 0
#endif
/* More CODE space savings by turning off process names */
#define PROCESS_CONF_NO_PROCESS_NAMES 1
/*
* USARTs:
* SmartRF RS232 -> USART0 / Alternative 1 (UART)
* SmartRF LCD -> USART1 / Alternative 2 (SPI)
*/
#define UART_ON_USART 0
#define UART1_CONF_ENABLE 0
#ifndef UART0_CONF_ENABLE
#define UART0_CONF_ENABLE 1
#endif
#ifndef UART0_CONF_WITH_INPUT
#define UART0_CONF_WITH_INPUT 0
#endif
#ifndef UART0_CONF_HIGH_SPEED
#define UART0_CONF_HIGH_SPEED 0
#endif
/* USB output buffering enabled by default (relevant to cc2531 builds only) */
#ifndef USB_SERIAL_CONF_BUFFERED
#define USB_SERIAL_CONF_BUFFERED 1
#endif
#define SLIP_RADIO_CONF_NO_PUTCHAR 1
#if defined (UIP_FALLBACK_INTERFACE) || defined (CMD_CONF_OUTPUT)
#define SLIP_ARCH_CONF_ENABLE 1
#endif
/* Are we a SLIP bridge? */
#if SLIP_ARCH_CONF_ENABLE
/* Make sure the UART is enabled, with interrupts */
#undef UART0_CONF_ENABLE
#undef UART0_CONF_WITH_INPUT
#define UART0_CONF_ENABLE 1
#define UART0_CONF_WITH_INPUT 1
#endif
/* Output all captured frames over the UART in hexdump format */
#ifndef CC2530_RF_CONF_HEXDUMP
#define CC2530_RF_CONF_HEXDUMP 0
#endif
#if CC2530_RF_CONF_HEXDUMP
/* We need UART1 output */
#undef UART_ZERO_CONF_ENABLE
#define UART_ZERO_CONF_ENABLE 1
#endif
/* Code Shortcuts */
/*
* When set, this directive also configures the following bypasses:
* - process_post_synch() in tcpip_input() (we call packet_input())
* - process_post_synch() in tcpip_uipcall (we call the relevant pthread)
* - mac_call_sent_callback() is replaced with sent() in various places
*
* These are good things to do, they reduce stack usage and prevent crashes
*/
#define NETSTACK_CONF_SHORTCUTS 1
/*
* By default we read our MAC from the (read-only) Information Page (primary
* location). In order to have a user-programmable mac, define this as 0 to
* use the secondary location (addresses 0xFFE8 - 0xFFEF on the last flash page)
*/
#ifndef CC2530_CONF_MAC_FROM_PRIMARY
#define CC2530_CONF_MAC_FROM_PRIMARY 1
#endif
/* Interrupt Number 6: Shared between P2 Inputs, I2C and USB
* A single ISR handles all of the above. Leave this as is if you are not
* interested in any of the above. Define as 1 (e.g. in project-conf.h) if
* at least one of those interrupt sources will need handled */
#ifndef PORT_2_ISR_ENABLED
#define PORT_2_ISR_ENABLED 0
#endif
/*
* Sensors
* It is harmless to #define XYZ 1
* even if the sensor is not present on our device
*/
#ifndef BUTTON_SENSOR_CONF_ON
#define BUTTON_SENSOR_CONF_ON 1 /* Buttons */
#endif
/* B2 on the cc2531 USB stick can be a reset button or a general-purpose one */
#ifndef CC2531_CONF_B2_REBOOTS
#define CC2531_CONF_B2_REBOOTS 0 /* General Purpose by default */
#endif
/* ADC - Turning this off will disable everything below */
#ifndef ADC_SENSOR_CONF_ON
#define ADC_SENSOR_CONF_ON 1
#endif
#define TEMP_SENSOR_CONF_ON 1 /* Temperature */
#define VDD_SENSOR_CONF_ON 1 /* Supply Voltage */
#define BATTERY_SENSOR_CONF_ON 0 /* Battery */
/* Low Power Modes - We only support PM0/Idle and PM1 */
#ifndef LPM_CONF_MODE
#define LPM_CONF_MODE 0 /* 0: no LPM, 1: MCU IDLE, 2: Drop to PM1 */
#endif
/* DMA Configuration */
#ifndef DMA_CONF_ON
#define DMA_CONF_ON 0
#endif
/* Viztool on by default for IPv6 builds */
#if UIP_CONF_IPV6
#ifndef VIZTOOL_CONF_ON
#define VIZTOOL_CONF_ON 1
#endif /* VIZTOOL_CONF_ON */
#endif /* UIP_CONF_IPV6 */
/* Network Stack */
#ifndef NETSTACK_CONF_NETWORK
#if UIP_CONF_IPV6
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#else
#define NETSTACK_CONF_NETWORK rime_driver
#endif /* UIP_CONF_IPV6 */
#endif /* NETSTACK_CONF_NETWORK */
#ifndef NETSTACK_CONF_MAC
#define NETSTACK_CONF_MAC csma_driver
#endif
#ifndef NETSTACK_CONF_RDC
#define NETSTACK_CONF_RDC nullrdc_driver
#define NULLRDC_802154_AUTOACK 1
#define NULLRDC_802154_AUTOACK_HW 1
#endif
#ifndef NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
#endif
#ifndef NETSTACK_CONF_FRAMER
#define NETSTACK_CONF_FRAMER framer_802154
#endif
#define NETSTACK_CONF_RADIO cc2530_rf_driver
/* RF Config */
#define IEEE802154_CONF_PANID 0x5449 /* TI */
#ifndef CC2530_RF_CONF_CHANNEL
#define CC2530_RF_CONF_CHANNEL 25
#endif /* CC2530_RF_CONF_CHANNEL */
#ifndef CC2530_RF_CONF_AUTOACK
#define CC2530_RF_CONF_AUTOACK 1
#endif /* CC2530_CONF_AUTOACK */
#if UIP_CONF_IPV6
/* Addresses, Sizes and Interfaces */
/* 8-byte addresses here, 2 otherwise */
#define RIMEADDR_CONF_SIZE 8
#define UIP_CONF_LL_802154 1
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
/* TCP, UDP, ICMP */
#define UIP_CONF_TCP 0
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
/* ND and Routing */
#ifndef UIP_CONF_ROUTER
#define UIP_CONF_ROUTER 1
#endif
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_IP_FORWARD 0
#define RPL_CONF_STATS 0
#define RPL_CONF_MAX_DAG_ENTRIES 1
#ifndef RPL_CONF_OF
#define RPL_CONF_OF rpl_mrhof
#endif
#define UIP_CONF_ND6_REACHABLE_TIME 600000
#define UIP_CONF_ND6_RETRANS_TIMER 10000
#ifndef NBR_TABLE_CONF_MAX_NEIGHBORS
#define NBR_TABLE_CONF_MAX_NEIGHBORS 4 /* Handle n Neighbors */
#endif
#ifndef UIP_CONF_MAX_ROUTES
#define UIP_CONF_MAX_ROUTES 4 /* Handle n Routes */
#endif
/* uIP */
#ifndef UIP_CONF_BUFFER_SIZE
#define UIP_CONF_BUFFER_SIZE 240
#endif
#define UIP_CONF_IPV6_QUEUE_PKT 0
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_REASSEMBLY 0
/* 6lowpan */
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG 0 /* About 2KB of CODE if 1 */
#endif
#define SICSLOWPAN_CONF_MAXAGE 8
/* Define our IPv6 prefixes/contexts here */
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
#define SICSLOWPAN_CONF_ADDR_CONTEXT_0 { \
addr_contexts[0].prefix[0] = 0xaa; \
addr_contexts[0].prefix[1] = 0xaa; \
}
#define MAC_CONF_CHANNEL_CHECK_RATE 8
#ifndef QUEUEBUF_CONF_NUM
#define QUEUEBUF_CONF_NUM 6
#endif
#else /* UIP_CONF_IPV6 */
/* Network setup for non-IPv6 (rime). */
#define UIP_CONF_IP_FORWARD 1
#define UIP_CONF_BUFFER_SIZE 108
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
#define QUEUEBUF_CONF_NUM 8
#endif /* UIP_CONF_IPV6 */
/* Prevent SDCC compile error when UIP_CONF_ROUTER == 0 */
#if !UIP_CONF_ROUTER
#define UIP_CONF_DS6_AADDR_NBU 1
#endif
#endif /* __CONTIKI_CONF_H__ */
Reference in New Issue View Git Blame Copy Permalink