contiki/tests/rftest-rx.c
Mariano Alvira 4b17c144d0 LEDs now indicate bit position (instead of (1 << pos)) which is more
consistent with how everything else works
2010-03-07 15:39:56 -05:00

52 lines
995 B
C

#include <mc1322x.h>
#include <board.h>
#include <stdio.h>
#include "tests.h"
#include "config.h"
#define LED LED_GREEN
void main(void) {
volatile packet_t *p;
*GPIO_DATA0 = 0x00000000;
*GPIO_PAD_DIR0 = ( 1 << LED );
/* read from the data register instead of the pad */
/* this is needed because the led clamps the voltage low */
*GPIO_DATA_SEL0 = ( 1 << LED );
uart_init(INC,MOD);
print_welcome("rftest-rx");
reset_maca();
radio_init();
flyback_init();
vreg_init();
init_phy();
free_all_packets();
/* trim the reference osc. to 24MHz */
pack_XTAL_CNTL(CTUNE_4PF, CTUNE, FTUNE, IBIAS);
set_power(0x0f); /* 0dbm */
set_channel(0); /* channel 11 */
enable_irq(MACA);
/* initial radio command */
/* nop, promiscuous, no cca */
*MACA_CONTROL = (1 << PRM) | (NO_CCA << MODE);
while(1) {
if((p = rx_packet())) {
toggle_gpio0(LED);
/* print and free the packet */
printf("rftest-rx --- ");
print_packet(p);
free_packet(p);
}
}
}