mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 16:29:34 +00:00
418 lines
9.7 KiB
ArmAsm
418 lines
9.7 KiB
ArmAsm
;
|
|
; Copyright (c) 2003-2007, Adam Dunkels, Josef Soucek and Oliver Schmidt
|
|
; All rights reserved.
|
|
;
|
|
; Redistribution and use in source and binary forms, with or without
|
|
; modification, are permitted provided that the following conditions
|
|
; are met:
|
|
; 1. Redistributions of source code must retain the above copyright
|
|
; notice, this list of conditions and the following disclaimer.
|
|
; 2. Redistributions in binary form must reproduce the above copyright
|
|
; notice, this list of conditions and the following disclaimer in the
|
|
; documentation and/or other materials provided with the distribution.
|
|
; 3. Neither the name of the Institute nor the names of its contributors
|
|
; may be used to endorse or promote products derived from this software
|
|
; without specific prior written permission.
|
|
;
|
|
; THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
; ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
; OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
; LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
; OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
; SUCH DAMAGE.
|
|
;
|
|
; This file is part of the Contiki operating system.
|
|
;
|
|
; Author: Adam Dunkels <adam@sics.se>, Josef Soucek <josef.soucek@ide64.org>,
|
|
; Oliver Schmidt <ol.sc@web.de>
|
|
;
|
|
; $Id: lan91c96.S,v 1.2 2007/12/01 20:23:11 oliverschmidt Exp $
|
|
;
|
|
;---------------------------------------------------------------------
|
|
|
|
.segment "JUMPTABLE"
|
|
|
|
; Driver signature
|
|
.byte $65, $74, $68 ; "eth"
|
|
.byte $01 ; Ethernet driver API version number
|
|
|
|
; Ethernet address
|
|
mac: .byte $00, $80, $0F ; OUI of Standard Microsystems
|
|
.byte $11, $11, $11
|
|
|
|
; Buffer attributes
|
|
bufaddr:.res 2 ; Address
|
|
bufsize:.res 2 ; Size
|
|
|
|
; Jump table.
|
|
.addr init
|
|
.addr poll
|
|
.addr send
|
|
.addr exit
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.zeropage
|
|
|
|
sp: .res 2 ; Stack pointer (Do not trash !)
|
|
reg: .res 2 ; Address of register base
|
|
ptr: .res 2 ; Indirect addressing pointer
|
|
len: .res 2 ; Frame length
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.segment "EXTZP": zeropage
|
|
|
|
; Empty segment to avoid linker warnings
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.rodata
|
|
|
|
fixup: .byte fixup02-fixup01, fixup03-fixup02, fixup04-fixup03
|
|
.byte fixup05-fixup04, fixup06-fixup05, fixup07-fixup06
|
|
.byte fixup08-fixup07, fixup09-fixup08, fixup10-fixup09
|
|
.byte fixup11-fixup10, fixup12-fixup11, fixup13-fixup12
|
|
.byte fixup14-fixup13, fixup15-fixup14, fixup16-fixup15
|
|
.byte fixup17-fixup16, fixup18-fixup17, fixup19-fixup18
|
|
.byte fixup20-fixup19, fixup21-fixup20, fixup22-fixup21
|
|
.byte fixup23-fixup22, fixup24-fixup23, fixup25-fixup24
|
|
.byte fixup26-fixup25, fixup27-fixup26, fixup28-fixup27
|
|
.byte fixup29-fixup28, fixup30-fixup29, fixup31-fixup30
|
|
.byte fixup32-fixup31, fixup33-fixup32, fixup34-fixup33
|
|
.byte fixup35-fixup34, fixup36-fixup35, fixup37-fixup36
|
|
.byte fixup38-fixup37, fixup39-fixup38, fixup40-fixup39
|
|
.byte fixup41-fixup40, fixup42-fixup41
|
|
|
|
fixups = * - fixup
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
ethbsr := $FF0E ; Bank select register R/W (2B)
|
|
|
|
; Register bank 0
|
|
ethtcr := $FF00 ; Transmition control register R/W (2B)
|
|
ethephsr := $FF02 ; EPH status register R/O (2B)
|
|
ethrcr := $FF04 ; Receive control register R/W (2B)
|
|
ethecr := $FF06 ; Counter register R/O (2B)
|
|
ethmir := $FF08 ; Memory information register R/O (2B)
|
|
ethmcr := $FF0A ; Memory Config. reg. +0 R/W +1 R/O (2B)
|
|
|
|
; Register bank 1
|
|
ethcr := $FF00 ; Configuration register R/W (2B)
|
|
ethbar := $FF02 ; Base address register R/W (2B)
|
|
ethiar := $FF04 ; Individual address register R/W (6B)
|
|
ethgpr := $FF0A ; General address register R/W (2B)
|
|
ethctr := $FF0C ; Control register R/W (2B)
|
|
|
|
; Register bank 2
|
|
ethmmucr := $FF00 ; MMU command register W/O (1B)
|
|
ethautotx := $FF01 ; AUTO TX start register R/W (1B)
|
|
ethpnr := $FF02 ; Packet number register R/W (1B)
|
|
etharr := $FF03 ; Allocation result register R/O (1B)
|
|
ethfifo := $FF04 ; FIFO ports register R/O (2B)
|
|
ethptr := $FF06 ; Pointer register R/W (2B)
|
|
ethdata := $FF08 ; Data register R/W (4B)
|
|
ethist := $FF0C ; Interrupt status register R/O (1B)
|
|
ethack := $FF0C ; Interrupt acknowledge register W/O (1B)
|
|
ethmsk := $FF0D ; Interrupt mask register R/W (1B)
|
|
|
|
; Register bank 3
|
|
ethmt := $FF00 ; Multicast table R/W (8B)
|
|
ethmgmt := $FF08 ; Management interface R/W (2B)
|
|
ethrev := $FF0A ; Revision register R/W (2B)
|
|
ethercv := $FF0C ; Early RCV register R/W (2B)
|
|
|
|
.data
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
init:
|
|
; Save address of register base
|
|
sta reg
|
|
stx reg+1
|
|
|
|
; Start with first fixup location
|
|
lda #<(fixup01+1)
|
|
ldx #>(fixup01+1)
|
|
sta ptr
|
|
stx ptr+1
|
|
ldx #$FF
|
|
ldy #$00
|
|
|
|
; Fixup address at location
|
|
: lda reg
|
|
ora (ptr),y
|
|
sta (ptr),y
|
|
iny
|
|
lda reg+1
|
|
sta (ptr),y
|
|
dey
|
|
|
|
; Advance to next fixup location
|
|
inx
|
|
cpx #fixups
|
|
bcs :+
|
|
lda ptr
|
|
clc
|
|
adc fixup,x
|
|
sta ptr
|
|
bcc :-
|
|
inc ptr+1
|
|
bcs :- ; Always
|
|
|
|
; Reset ETH card
|
|
: lda #$00 ; Bank 0
|
|
fixup00:sta ethbsr
|
|
|
|
lda #%10000000 ; Software reset
|
|
fixup01:sta ethrcr+1
|
|
|
|
ldy #$00
|
|
fixup02:sty ethrcr
|
|
fixup03:sty ethrcr+1
|
|
|
|
; Delay
|
|
: cmp ($FF,x) ; 6 cycles
|
|
cmp ($FF,x) ; 6 cycles
|
|
iny ; 2 cycles
|
|
bne :- ; 3 cycles
|
|
; 17 * 256 = 4352 -> 4,4 ms
|
|
|
|
; Enable transmit and receive
|
|
lda #%10000001 ; Enable transmit TXENA, PAD_EN
|
|
ldx #%00000011 ; Enable receive, strip CRC ???
|
|
fixup04:sta ethtcr
|
|
fixup05:stx ethrcr+1
|
|
|
|
lda #$01 ; Bank 1
|
|
fixup06:sta ethbsr
|
|
|
|
fixup07:lda ethcr+1
|
|
ora #%00010000 ; No wait (IOCHRDY)
|
|
fixup08:sta ethcr+1
|
|
|
|
lda #%00001001 ; Auto release
|
|
fixup09:sta ethctr+1
|
|
|
|
; Set MAC address
|
|
lda mac
|
|
ldx mac+1
|
|
fixup10:sta ethiar
|
|
fixup11:stx ethiar+1
|
|
lda mac+2
|
|
ldx mac+3
|
|
fixup12:sta ethiar+2
|
|
fixup13:stx ethiar+3
|
|
lda mac+4
|
|
ldx mac+5
|
|
fixup14:sta ethiar+4
|
|
fixup15:stx ethiar+5
|
|
|
|
; Set interrupt mask
|
|
lda #$02 ; Bank 2
|
|
fixup16:sta ethbsr
|
|
|
|
lda #%00000000 ; No interrupts
|
|
fixup17:sta ethmsk
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
poll:
|
|
fixup18:lda ethist
|
|
and #%00000001 ; RCV INT
|
|
bne :+
|
|
|
|
; No packet available
|
|
tax
|
|
rts
|
|
|
|
; Process the incoming packet
|
|
; ---------------------------
|
|
|
|
: lda #$00
|
|
ldx #%11100000 ; RCV, AUTO INCR., READ
|
|
fixup19:sta ethptr
|
|
fixup20:stx ethptr+1
|
|
|
|
; Last word contains 'last data byte' and $60 or 'fill byte' and $40
|
|
fixup21:lda ethdata ; Status word
|
|
fixup22:lda ethdata ; Need high byte only
|
|
|
|
; Move ODDFRM bit into carry:
|
|
; - Even packet length -> carry clear -> subtract 6 bytes
|
|
; - Odd packet length -> carry set -> subtract 5 bytes
|
|
lsr
|
|
lsr
|
|
lsr
|
|
lsr
|
|
lsr
|
|
|
|
; The packet contains 3 extra words
|
|
fixup23:lda ethdata ; Total number of bytes
|
|
sbc #$05 ; Actually 5 or 6 depending on carry
|
|
sta len
|
|
fixup24:lda ethdata
|
|
sbc #$00
|
|
sta len+1
|
|
|
|
; Is len > bufsize ?
|
|
sec
|
|
lda len
|
|
sbc bufsize
|
|
lda len+1
|
|
sbc bufsize+1
|
|
bcc :+
|
|
|
|
; Yes, skip packet
|
|
; Remove and release RX packet from the FIFO
|
|
lda #%10000000
|
|
fixup25:sta ethmmucr
|
|
|
|
; No packet available
|
|
lda #$00
|
|
tax
|
|
rts
|
|
|
|
; Read bytes into buffer
|
|
: lda bufaddr
|
|
ldx bufaddr+1
|
|
sta ptr
|
|
stx ptr+1
|
|
ldx len+1
|
|
ldy #$00
|
|
read:
|
|
fixup26:lda ethdata
|
|
sta (ptr),y
|
|
iny
|
|
bne :+
|
|
inc ptr+1
|
|
: cpy len
|
|
bne read
|
|
dex
|
|
bpl read
|
|
|
|
; Remove and release RX packet from the FIFO
|
|
lda #%10000000
|
|
fixup27:sta ethmmucr
|
|
|
|
; Return packet length
|
|
lda len
|
|
ldx len+1
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
send:
|
|
; Save packet length
|
|
sta len
|
|
stx len+1
|
|
|
|
; Allocate memory for TX
|
|
txa
|
|
ora #%00100000
|
|
fixup28:sta ethmmucr
|
|
|
|
; 8 retries
|
|
ldy #$08
|
|
|
|
; Wait for allocation ready
|
|
:
|
|
fixup29:lda ethist
|
|
and #%00001000 ; ALLOC INT
|
|
bne :+
|
|
|
|
; Shouldn't we do something here to actively free memory,
|
|
; maybe removing and releasing an RX packet from the FIFO ???
|
|
|
|
; And try again
|
|
dey
|
|
bne :-
|
|
rts
|
|
|
|
; Acknowledge interrupt, is it necessary ???
|
|
: lda #%00001000
|
|
fixup30:sta ethack
|
|
|
|
; Set packet address
|
|
fixup31:lda etharr
|
|
fixup32:sta ethpnr
|
|
|
|
lda #$00
|
|
ldx #%01000000 ; AUTO INCR.
|
|
fixup33:sta ethptr
|
|
fixup34:stx ethptr+1
|
|
|
|
; Status written by CSMA
|
|
lda #$00
|
|
fixup35:sta ethdata
|
|
fixup36:sta ethdata
|
|
|
|
; Check packet length parity:
|
|
; - Even packet length -> carry set -> add 6 bytes
|
|
; - Odd packet length -> carry clear -> add 5 bytes
|
|
lda len
|
|
eor #$01
|
|
lsr
|
|
|
|
; The packet contains 3 extra words
|
|
lda len
|
|
adc #$05 ; Actually 5 or 6 depending on carry
|
|
fixup37:sta ethdata
|
|
lda len+1
|
|
adc #$00
|
|
fixup38:sta ethdata
|
|
|
|
; Send the packet
|
|
; ---------------
|
|
|
|
; Write bytes from buffer
|
|
lda bufaddr
|
|
ldx bufaddr+1
|
|
sta ptr
|
|
stx ptr+1
|
|
ldx len+1
|
|
ldy #$00
|
|
write: lda (ptr),y
|
|
fixup39:sta ethdata
|
|
iny
|
|
bne :+
|
|
inc ptr+1
|
|
: cpy len
|
|
bne write
|
|
dex
|
|
bpl write
|
|
|
|
; Odd packet length ?
|
|
lda len
|
|
lsr
|
|
bcc :+
|
|
|
|
; Yes
|
|
lda #%00100000 ; ODD
|
|
bne :++ ; Always
|
|
|
|
; No
|
|
: lda #$00
|
|
fixup40:sta ethdata ; Fill byte
|
|
:
|
|
fixup41:sta ethdata ; Control byte
|
|
|
|
; Add packet to FIFO
|
|
lda #%11000000 ; ENQUEUE PACKET - transmit packet
|
|
fixup42:sta ethmmucr
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
exit:
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|