mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-22 10:30:13 +00:00
199 lines
11 KiB
C
199 lines
11 KiB
C
/*
|
|
* Contiki PIC32 Port project
|
|
*
|
|
* Copyright (c) 2012,
|
|
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
|
|
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
|
|
* (http://www.cnit.it).
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* \addtogroup pic32 PIC32 Contiki Port
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \file pic32_uart.c
|
|
* \brief UART Interface for PIC32MX (pic32mx795f512l)
|
|
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
|
|
* \date 2012-03-21
|
|
*/
|
|
|
|
/*
|
|
* PIC32MX795F512L - Specific Functions
|
|
*
|
|
* All the functions in this part of the file are specific for the
|
|
* pic32mx795f512l that is characterized by registers' name that differ from
|
|
* the 3xx and 4xx families of the pic32mx.
|
|
*/
|
|
|
|
#define __UART_CODE_TEST__ 0
|
|
|
|
#if __UART_CODE_TEST__
|
|
#define __USE_UART__ 1
|
|
#define __USE_UART_PORT1A__ 1
|
|
#define __USE_UART_PORT1B__ 1
|
|
#define __USE_UART_PORT2A__ 1
|
|
#define __USE_UART_PORT2B__ 1
|
|
#define __USE_UART_PORT3A__ 1
|
|
#define __USE_UART_PORT3B__ 1
|
|
#endif /* __UART_CODE_TEST__ */
|
|
|
|
#ifdef __USE_UART__
|
|
|
|
#include <pic32_uart.h>
|
|
#include <pic32_clock.h>
|
|
#include <pic32_irq.h>
|
|
|
|
#include <p32xxxx.h>
|
|
|
|
#include "contiki.h"
|
|
|
|
#include "dev/leds.h"
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
#define UART_PORT_INIT_XA(XX, YY, ZZ) \
|
|
int8_t \
|
|
pic32_uart##XX##A_init(uint32_t baudrate, uint16_t byte_format) \
|
|
{ \
|
|
/* Disable Interrupts: RX, TX, ERR */ \
|
|
IEC##ZZ##CLR = _IEC##ZZ##_U##XX##AEIE_MASK | _IEC##ZZ##_U##XX##ATXIE_MASK | _IEC##ZZ##_U##XX##ARXIE_MASK; \
|
|
IFS##ZZ##CLR = _IFS##ZZ##_U##XX##AEIF_MASK | _IFS##ZZ##_U##XX##ATXIF_MASK | _IFS##ZZ##_U##XX##ARXIF_MASK; \
|
|
\
|
|
/* Clear thant Set Pri and Sub priority */ \
|
|
IPC##YY##CLR = _IPC##YY##_U##XX##AIP_MASK | _IPC##YY##_U##XX##AIS_MASK; \
|
|
IPC##YY##SET = (6 << _IPC##YY##_U##XX##AIP_POSITION) | (0 << _IPC##YY##_U##XX##AIS_POSITION); \
|
|
\
|
|
/* Mode Register Reset (this also stops UART) */ \
|
|
U##XX##AMODE = 0; \
|
|
\
|
|
/* Use BRGH = 1: 4 divisor */ \
|
|
U##XX##AMODESET = _U##XX##AMODE_BRGH_MASK; \
|
|
U##XX##ABRG = pic32_clock_calculate_brg(4, baudrate); \
|
|
\
|
|
U##XX##AMODESET = byte_format & 0x07; /* Number of bit, Parity and Stop bits */ \
|
|
\
|
|
/* Status bits */ \
|
|
U##XX##ASTA = 0; \
|
|
U##XX##ASTASET = _U##XX##ASTA_URXEN_MASK | _U##XX##ASTA_UTXEN_MASK; /* Enable RX and TX */ \
|
|
\
|
|
IEC##ZZ##SET = _IEC##ZZ##_U##XX##ARXIE_MASK; \
|
|
\
|
|
/* Enable UART port */ \
|
|
U##XX##AMODESET = _U##XX##AMODE_UARTEN_MASK; \
|
|
\
|
|
return UART_NO_ERROR; \
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#define UART_PORT_INIT_XB(XX, YY, ZZ) \
|
|
int8_t \
|
|
pic32_uart##XX##B_init(uint32_t baudrate, uint16_t byte_format) \
|
|
{ \
|
|
/* Disable Interrupts: RX, TX, ERR */ \
|
|
IEC##ZZ##CLR = _IEC##ZZ##_U##XX##BEIE_MASK | _IEC##ZZ##_U##XX##BTXIE_MASK | _IEC##ZZ##_U##XX##BRXIE_MASK; \
|
|
IFS##ZZ##CLR = _IFS##ZZ##_U##XX##BEIF_MASK | _IFS##ZZ##_U##XX##BTXIF_MASK | _IFS##ZZ##_U##XX##BRXIF_MASK; \
|
|
\
|
|
/* Clear thant Set Pri and Sub priority */ \
|
|
IPC##YY##CLR = _IPC##YY##_U##XX##BIP_MASK | _IPC##YY##_U##XX##BIS_MASK; \
|
|
IPC##YY##SET = (6 << _IPC##YY##_U##XX##BIP_POSITION) | (0 << _IPC##YY##_U##XX##BIS_POSITION); \
|
|
\
|
|
/* Mode Register Reset (this also stops UART) */ \
|
|
U##XX##BMODE = 0; \
|
|
\
|
|
/* Use BRGH = 1: 4 divisor */ \
|
|
U##XX##BMODESET = _U##XX##BMODE_BRGH_MASK; \
|
|
U##XX##BBRG = pic32_clock_calculate_brg(4, baudrate); \
|
|
\
|
|
U##XX##BMODESET = byte_format & 0x07; /* Number of bit, Parity and Stop bits */ \
|
|
\
|
|
/* Status bits */ \
|
|
U##XX##BSTA = 0; \
|
|
U##XX##BSTASET = _U##XX##BSTA_URXEN_MASK | _U##XX##BSTA_UTXEN_MASK; /* Enable RX and TX */ \
|
|
\
|
|
IEC##ZZ##SET = _IEC##ZZ##_U##XX##BRXIE_MASK; \
|
|
\
|
|
/* Enable UART port */ \
|
|
U##XX##BMODESET = _U##XX##BMODE_UARTEN_MASK; \
|
|
\
|
|
return UART_NO_ERROR; \
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#define UART_PORT(XX, YY) \
|
|
\
|
|
int8_t \
|
|
pic32_uart##XX##_write(uint8_t data) \
|
|
{ \
|
|
volatile uint8_t wait; \
|
|
\
|
|
do { \
|
|
wait = U##XX##STAbits.UTXBF; \
|
|
} while(wait); \
|
|
\
|
|
U##XX##TXREG = data; \
|
|
\
|
|
return UART_NO_ERROR; \
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
#ifdef __USE_UART_PORT1A__
|
|
UART_PORT(1A, 0)
|
|
UART_PORT_INIT_XA(1, 6, 0)
|
|
#endif /* __USE_UART_PORT1A__ */
|
|
|
|
#ifdef __USE_UART_PORT1B__
|
|
UART_PORT(1B, 2)
|
|
UART_PORT_INIT_XB(1, 12, 2)
|
|
#endif /* __USE_UART_PORT1B__ */
|
|
|
|
#ifdef __USE_UART_PORT2A__
|
|
UART_PORT(2A, 1)
|
|
UART_PORT_INIT_XA(2, 7, 1)
|
|
#endif /* __USE_UART_PORT2A__ */
|
|
|
|
#ifdef __USE_UART_PORT2B__
|
|
UART_PORT(2B, 2)
|
|
UART_PORT_INIT_XB(2, 12, 2)
|
|
#endif /* __USE_UART_PORT2B__ */
|
|
|
|
#ifdef __USE_UART_PORT3A__
|
|
UART_PORT(3A, 1)
|
|
UART_PORT_INIT_XA(3, 8, 1)
|
|
#endif /* __USE_UART_PORT3A__ */
|
|
|
|
#ifdef __USE_UART_PORT3B__
|
|
UART_PORT(3B, 2)
|
|
UART_PORT_INIT_XB(3, 12, 2)
|
|
#endif /* __USE_UART_PORT3B__ */
|
|
|
|
#endif /* __USE_UART__ */
|
|
|
|
/** @} */
|