mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
44 lines
3.1 KiB
Markdown
44 lines
3.1 KiB
Markdown
Zolertia RE-Mote platform (revision B)
|
|
============================================
|
|
|
|
The RE-Mote is a hardware development platform to build real IoT (Internet of Things) applications and products, aimed to high skilled developers as well as Makers (Do-It-Yourself enthusiasts) and early beginners, providing an industry-ready and resilient hardware solution for most Smart Cities, Home Comfort, eHealth and Industrial applications. The RE-Mote conciliates an ultra-low power consumption with a high performance design, meeting specifications of processing resources, security and resilient operation.
|
|
|
|
The RE-Mote platform was designed jointly with universities and industrial partners from different countries in the context of RERUM <https://ict-rerum.eu> European Project.
|
|
|
|
The RE-Mote features a Zoul as its core module and it is bundled with the following features:
|
|
|
|
* ARM Cortex-M3 with 512KB flash and 32KB RAM (16KB retention), 32MHz.
|
|
* ISM 2.4-GHz IEEE 802.15.4 & Zigbee/Thread compliant.
|
|
* ISM 868-, 915-, 920-, 950-MHz ISM/SRD Band.
|
|
* On-board RF switch to programatically select RF itnerfaces. Above RF interfaces can be used alternatively over a single RP-SMA connector for external antenna, or simultaneously by using an UFl pigtail or soldering an internal ceramic chip antenna (available on request).
|
|
* AES-128/256, SHA2 Hardware Encryption Engine.
|
|
* ECC-128/256, RSA Hardware Acceleration Engine for Secure Key Exchange.
|
|
* Power consumption down to 150nA using our shutdown mode.
|
|
* Programming over BSL without requiring to press any button to enter bootloader mode.
|
|
* Built-in battery charger (500mA), Energy Harvesting and Solar Panels to be connected to standards LiPo batteries.
|
|
* Power input with wide range 3.7-16VDC.
|
|
* On-board micro USB connector for USB 2.0 applications.
|
|
* RGB LED to allow more than 7 colour combinations.
|
|
* On-board nano-watt Real Time Clock Calendar (RTCC).
|
|
* User and Reset buttons.
|
|
* On-board Micro-SD for external storage.
|
|
* On-board external Watchdog Timer (WDT) for resilient operation.
|
|
* Small form-factor of 73x40 mm.
|
|
* Available with enclosure for indoor use
|
|
|
|
The changes from Revision A to this new Revision B are summarized in the [Wiki](https://github.com/Zolertia/Resources/wiki/RE-Mote:-Enhancements-from-Rev.A-to-Rev.B)
|
|
|
|
The most prominent feature of the RE-Mote is its ultra low-power implementation, allowing a flexible and time/date-aware control of the platform operation modes by using its real-time clock (RTCC) and an ultra-low power PIC governing the battery manager.
|
|
|
|
The RE-Mote features an optional custom-made enclosure to fit most scenarios, allowing to easily connect sensors, actuators and rechargeable LiPo batteries. Its on-board RP-SMA antenna eliminates the need to mechanize an external antenna, allowing to alternatively use either a sub-1GHz or 2.4GHz antenna, or a multiband one. For dual band applications it is possible to use both sub-GHz and 2.4GHz interfaces simultaneously.
|
|
|
|
The external WDT with battery monitor allows a robust and resilience operation for most critical applications.
|
|
|
|
Zoul pin-out
|
|
=============
|
|
|
|
![RE-Mote pin-out (front)][remote-pinout-front]
|
|
![RE-Mote pin-out (back)][remote-pinout-back]
|
|
|
|
|