contiki/examples/avr-rss2/ipv6/rpl-border-router/Makefile

56 lines
1.6 KiB
Makefile

CONTIKI_PROJECT=border-router
all: $(CONTIKI_PROJECT)
CONTIKI=../../../..
#linker optimizations
SMALL=1
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
PROJECT_SOURCEFILES += eth-bridge.c
#PROJECT_SOURCEFILES += enc28j60.c
PROJECT_SOURCEFILES += enc28j60-ip64-driver.c
APPS += ping6
MODULES += dev/enc28j60 core/net/ip64
#Simple built-in webserver is the default.
#Override with make WITH_WEBSERVER=0 for no webserver.
#WITH_WEBSERVER=webserver-name will use /apps/webserver-name if it can be
#found in the /apps, /platform/$(TARGET)/apps/, or current directory (in that order).
# WITH_WEBSERVER=webserver for /apps/webserver
# WITH_WEBSERVER=raven-webserver for /platform/avr-raven/apps/raven-webserver/
#make clean before changing webservers!
#Note /apps/webserver contains a 2500 byte style sheet which is a severe test
#of the slip connection. Large MSS together with low baud rates without flow
#control will overrun the transmit buffer when the style sheet is requested.
WITH_WEBSERVER=1
ifeq ($(WITH_WEBSERVER),1)
CFLAGS += -DUIP_CONF_TCP=1
CFLAGS += -DWEBSERVER=1
PROJECT_SOURCEFILES += httpd-simple.c
else ifneq ($(WITH_WEBSERVER), 0)
APPS += $(WITH_WEBSERVER)
CFLAGS += -DUIP_CONF_TCP=1
CFLAGS += -DWEBSERVER=2
endif
ifeq ($(PREFIX),)
PREFIX = aaaa::1/64
endif
CONTIKI_WITH_IPV6 = 1
include $(CONTIKI)/Makefile.include
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 $(PREFIX)
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 $(PREFIX)