mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-08 23:08:29 +00:00
168 lines
6.2 KiB
Markdown
168 lines
6.2 KiB
Markdown
Getting Started with Contiki for STM32 Nucleo equipped with sub-1GHz SPIRIT1 expansion boards
|
|
=============================================================================================
|
|
|
|
This guide explains how to get started with the STM32 Nucleo and expansion boards port to Contiki.
|
|
|
|
Maintainers and Contacts
|
|
========================
|
|
|
|
Long-term maintainers:
|
|
* Marco Grella, marco.grella@st.com, github user: [STclab](https://github.com/STclab)
|
|
* Alok Mittal, alok.mittal@st.com, github user: [STclab](https://github.com/STclab)
|
|
* Indar Prakash Singhal, indar.singhal@st.com, github user: [STclab](https://github.com/STclab)
|
|
|
|
Contributors:
|
|
* David Siorpaes, david.siorpaes@st.com, github user: [siorpaes](https://github.com/siorpaes)
|
|
* Luca Celetto, luca.celetto@st.com
|
|
|
|
Port Feature
|
|
============
|
|
|
|
The port supports the following boards from ST:
|
|
- NUCLEO-L152RE board, based on the STM32L152RET6 ultra-low power microcontroller
|
|
- X-NUCLEO-IDS01A4 based on sub-1GHz SPSGRF-868 SPIRIT1 module (operating at 868 MHz)
|
|
- X-NUCLEO-IDS01A5 based on sub-1GHz SPSGRF-915 SPIRIT1 module (operating at 915 MHz)
|
|
- X-NUCLEO-IKS01A1 featuring motion MEMS and environmental sensors (optional)
|
|
|
|
The following drivers are included:
|
|
- LEDs and buttons (user, reset)
|
|
- USB
|
|
- SPIRIT1 sub-1GHz transceiver
|
|
- HTS221, LIS3MDL, LPS25HB, LSM6DS0 sensors
|
|
|
|
|
|
Hardware Requirements
|
|
=====================
|
|
|
|
* NUCLEO-L152RE development board
|
|
|
|
>The NUCLEO-L152RE board belongs to the STM32 Nucleo family.
|
|
It features an STM32L152RET6 ultra-low power microcontroller based on ARM Cortex M3 MCU.
|
|
Detailed information on the NUCLEO-L152RE development board can be found at:
|
|
http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260002
|
|
|
|
|
|
* X-NUCLEO-IDS01Ax sub-1GHz expansion board
|
|
|
|
>The X-NUCLEO-IDS01A4 and X-NUCLEO-IDS01A5 are STM32 Nucleo expansion boards that use
|
|
the module SPSGRF-868 or SPSGRF-915 based on SPIRIT1 low data rate, low power sub-1 GHz transceiver.
|
|
|
|
>The user can select the X-NUCLEO-IDS01A4 board to operate the SPIRIT1 transceiver at 868MHz or the X-NUCLEO-IDS01A5 board to operate the SPIRIT1 transceiver at 915MHz.
|
|
|
|
>Detailed information on the X-NUCLEO-IDS01A4 expansion board can be found at:
|
|
http://www.st.com/web/catalog/tools/FM146/CL2167/SC2006/PF261982
|
|
|
|
>Detailed information on the X-NUCLEO-IDS01A5 expansion board can be found at:
|
|
http://www.st.com/web/catalog/tools/FM146/CL2167/SC2006/PF261983
|
|
|
|
>Detailed information on the SPIRIT1 sub-1GHz transceiver can be found at:
|
|
http://www.st.com/web/catalog/sense_power/FM2185/SC1845/PF253167
|
|
|
|
* X-NUCLEO-IKS01A1, motion MEMS and environmental sensors expansion board (OPTIONAL)
|
|
|
|
>The X-NUCLEO-IKS01A1 is a motion MEMS and environmental sensor evaluation board.
|
|
The use of this board is optional in the stm32nucleo-spirit1 Contiki platform.
|
|
|
|
>Detailed information on the X-NUCLEO-IKS01A1 expansion board can be found at:
|
|
http://www.st.com/web/catalog/tools/FM146/CL2167/SC2006/PF261191
|
|
|
|
|
|
* USB type A to Mini-B USB cable, to connect the STM32 Nucleo board to the PC
|
|
|
|
Software Requirements
|
|
=====================
|
|
|
|
The following software are needed:
|
|
|
|
* ST port of Contiki for STM32 Nucleo and expansion boards.
|
|
|
|
>The port is automatically installed when both the Contiki and the submodule repository are cloned: the former hosts the Contiki distribution and the ST platform interface, the latter hosts the actual library. The following commands are needed to download the full porting:
|
|
|
|
git clone https://github.com/STclab/contiki.git
|
|
cd contiki/
|
|
git checkout stm32nucleo-spirit1
|
|
git submodule init
|
|
git submodule update
|
|
|
|
|
|
Note: the first and third steps are required only if using the STclab GitHub repository, they won't be needed any more once the Pull Request is accepted.
|
|
|
|
The platform name is: stm32nucleo-spirit1
|
|
|
|
* A toolchain to build the firmware: The port has been developed and tested with GNU Tools
|
|
for ARM Embedded Processors.
|
|
>The toolchain can be found at: https://launchpad.net/gcc-arm-embedded
|
|
The port was developed and tested using this version: gcc-arm-none-eabi v4.8.3
|
|
|
|
|
|
Examples
|
|
========
|
|
|
|
The following examples have been successfully tested:
|
|
|
|
* examples/stm32nucleo-spirit1/sensor-demo
|
|
* examples/ipv6/simple-udp-rpl (multicast, rpl-border-router, simple-udp-rpl)
|
|
|
|
|
|
Build an example
|
|
================
|
|
In order to build an example go to the selected example directory (see a list of tested
|
|
examples in the previous section).
|
|
|
|
For example, go to examples/ipv6/simple-udp-rpl directory.
|
|
|
|
|
|
If the X-NUCLEO-IDS01A4 sub-1GHz RF expansion board is used, the following must be run:
|
|
|
|
make TARGET=stm32nucleo-spirit1 BOARD=ids01a4 clean
|
|
make TARGET=stm32nucleo-spirit1 BOARD=ids01a4
|
|
|
|
If the X-NUCLEO-IDS01A5 sub-1GHz RF expansion board is used, the following must be run:
|
|
|
|
make TARGET=stm32nucleo-spirit1 BOARD=ids01a5 clean
|
|
make TARGET=stm32nucleo-spirit1 BOARD=ids01a5
|
|
|
|
|
|
This will create executables for UDP sender and receiver nodes.
|
|
|
|
In order to generate binary files that can be flashed on the STM32 Nucleo the following command must be run:
|
|
|
|
arm-none-eabi-objcopy -O binary unicast-sender.stm32nucleo-spirit1 unicast-sender.bin
|
|
arm-none-eabi-objcopy -O binary unicast-receiver.stm32nucleo-spirit1 unicast-receiver.bin
|
|
|
|
These executables can be programmed on the nodes using the procedure described hereafter.
|
|
|
|
|
|
In case you need to build an example that uses the additional sensors expansion board
|
|
(for example, considering a system made of NUCLEO-L152RE, X-NUCLEO-IDS01A4 and X-NUCLEO-IKS01A1)
|
|
then the command to be run would be:
|
|
|
|
make TARGET=stm32nucleo-spirit1 BOARD=ids01a4 SENSORBOARD=iks01a1
|
|
|
|
System setup
|
|
============
|
|
|
|
1. Check that the jumper on the J1 connector on the X-NUCLEO-IDS01Ax expansion board is connected.
|
|
This jumper provides the required voltage to the devices on the board.
|
|
|
|
2. Connect the X-NUCLEO-IDS01Ax board to the STM32 Nucleo board (NUCLEO-L152RE) from the top.
|
|
|
|
3. If the optional X-NUCLEO-IKS01A1 board is used, connect it on top of the X-NUCLEO-IDS01Ax board.
|
|
|
|
4. Power the STM32 Nucleo board using the Mini-B USB cable connected to the PC.
|
|
|
|
5. Program the firmware on the STM32 Nucleo board.
|
|
This can be done by copying the binary file on the USB mass storage that is
|
|
automatically created when plugging the STM32 Nucleo board to the PC.
|
|
|
|
6. Reset the MCU by using the reset button on the STM32 Nucleo board
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|