mirror of https://github.com/oliverschmidt/contiki.git synced 2024-11-08 23:08:29 +00:00

History

Víctor Ariño 561e70b18e Updated current fallback_interface(s) to return int.		2015-09-22 12:53:04 +02:00
..
border-router.c	Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it	2015-06-15 11:10:51 +02:00
Makefile	Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.	2014-12-01 20:13:09 +01:00
Makefile.target	New platform: TI cc2530 Development Kit	2012-03-23 14:41:07 +00:00
project-conf.h	Change the way we switch between cc2530 models	2013-08-09 15:53:23 +01:00
README.md	Rename to md	2013-03-26 23:15:37 +01:00
slip-bridge.c	Updated current fallback_interface(s) to return int.	2015-09-22 12:53:04 +02:00

README.md

border-router example for the TI SmartRF05EB with a cc2530EM

This example is meant to be used with tunslip6 in tools/

Build the code and load it onto your node
Connect your node to your PC
run:

sudo ./tunslip6 -s /dev/ttyUSBx
/

This will setup tun0 on your PC over device /dev/ttyUSBx. The address argument should contain the v6 address that you want to assign to tun0 The node will use this address to obtain the network prefix

For example:

sudo ./tunslip6 aaaa::1/64

This will use aaaa:: / 64 as the prefix for the 15.4 network.