contiki/platform/jn516x/dev/dr1174/button-sensor.c

/*
 * Copyright (c) 2015 NXP B.V.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of NXP B.V. nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY NXP B.V. AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL NXP B.V. OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 *
 * Author: Theo van Daele <theo.van.daele@nxp.com>
 *
 */
#include "contiki.h"
#include "sys/etimer.h"
#include "lib/sensors.h"
#include "button-sensor.h"
#include <AppHardwareApi.h>

/*---------------------------------------------------------------------------*/
/* LOCAL DEFINITIONS                                                         */
/*---------------------------------------------------------------------------*/
/* #define DEBUG */
#ifdef DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif

typedef enum {
  APP_E_BUTTON_SW0 = 0,
#if SENSOR_BOARD_DR1199
  APP_E_BUTTON_SW1,
  APP_E_BUTTON_SW2,
  APP_E_BUTTON_SW3,
  APP_E_BUTTON_SW4,
#endif /* SENSOR_BOARD_DR1199 */
  APP_E_BUTTON_NUM    /* Number of buttons */
} app_e_button_t;

/* Mapping of DIO port connections to buttons. Use as mask to get button value */
#define APP_PORT_BUTTON_SW0   (8)
#if SENSOR_BOARD_DR1199
#define APP_PORT_BUTTON_SW1    (11)
#define APP_PORT_BUTTON_SW2    (12)
#define APP_PORT_BUTTON_SW3    (17)
#define APP_PORT_BUTTON_SW4    (1)
#endif /* SENSOR_BOARD_DR1199 */

/* Definition of port masks based on button mapping */
#if SENSOR_BOARD_DR1199
#define APP_BUTTONS_DIO_MASK  ((1 << APP_PORT_BUTTON_SW0) | \
                               (1 << APP_PORT_BUTTON_SW1) | \
                               (1 << APP_PORT_BUTTON_SW2) | \
                               (1 << APP_PORT_BUTTON_SW3) | \
                               (1 << APP_PORT_BUTTON_SW4))
#else /* SENSOR_BOARD_DR1199 */
#define APP_BUTTONS_DIO_MASK  (1 << APP_PORT_BUTTON_SW0)
#endif /* SENSOR_BOARD_DR1199 */

#define KEY_SAMPLE_TIME (CLOCK_SECOND / 20)

typedef enum {
  BUTTONS_STATUS_NOT_INIT = 0,
  BUTTONS_STATUS_INIT,
  BUTTONS_STATUS_NOT_ACTIVE = BUTTONS_STATUS_INIT,
  BUTTONS_STATUS_ACTIVE
} buttons_status_t;

/*---------------------------------------------------------------------------*/
/* LOCAL DATA DEFINITIONS                                                    */
/*---------------------------------------------------------------------------*/
const struct sensors_sensor button_sensor;
volatile static buttons_status_t buttons_status = BUTTONS_STATUS_NOT_INIT;
static int key_value = 0;
static uint8 key_map[] = { APP_PORT_BUTTON_SW0, /* APP_E_BUTTON_SW0 */
#if SENSOR_BOARD_DR1199
                           APP_PORT_BUTTON_SW1, /* APP_E_BUTTON_SW1 */
                           APP_PORT_BUTTON_SW2, /* APP_E_BUTTON_SW2 */
                           APP_PORT_BUTTON_SW3, /* APP_E_BUTTON_SW3 */
                           APP_PORT_BUTTON_SW4 /* APP_E_BUTTON_SW4 */
#endif /* SENSOR_BOARD_DR1199 */
};

/*---------------------------------------------------------------------------*/
/* LOCAL FUNCTION PROTOTYPES                                                 */
/*---------------------------------------------------------------------------*/
PROCESS(key_sampling, "Key sample");
static int get_key_value(void);

/*---------------------------------------------------------------------------*/
/* PUBLIC FUNCTIONS                                                          */
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
  if(type == SENSORS_HW_INIT) {
    /* Called from sensor thread when started.
       Configure DIO lines with buttons connected as input */
    vAHI_DioSetDirection(APP_BUTTONS_DIO_MASK, 0);
    /* Turn on pull-ups for DIO lines with buttons connected */
    vAHI_DioSetPullup(APP_BUTTONS_DIO_MASK, 0);
    PRINTF("HW_INIT BUTTONS (0x%x)\n", APP_BUTTONS_DIO_MASK);
    /* Configure debounce timer. Do not run it yet. */
    buttons_status = BUTTONS_STATUS_INIT;
    process_start(&key_sampling, NULL);
    return 1;
  } else if(type == SENSORS_ACTIVE) {
    if(buttons_status != BUTTONS_STATUS_NOT_INIT) {
      if(value) {
        /* Button sensor activated */
        PRINTF("BUTTONS ACTIVATED\n");
        buttons_status = BUTTONS_STATUS_ACTIVE;
      } else {
        /* Button sensor de-activated */
        PRINTF("BUTTONS DE-ACTIVATED\n");
        buttons_status = BUTTONS_STATUS_NOT_ACTIVE;
      }
      process_post(&key_sampling, PROCESS_EVENT_MSG, (void *)&buttons_status);
      return 1;
    } else {
      /* Buttons must be intialised before being (de)-activated */
      PRINTF("ERROR: NO HW_INIT BUTTONS\n");
      return 0;
    }
  } else {
    /* Non valid type */
    return 0;
  }
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
  if(type == SENSORS_ACTIVE) {
    return buttons_status == BUTTONS_STATUS_ACTIVE;
  } else if(type == SENSORS_READY) {
    return buttons_status != BUTTONS_STATUS_NOT_INIT;
  }
  return 0;
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
  /* type: Not defined for the buttons interface
   */
  return key_value;
}
/*---------------------------------------------------------------------------*/
/* LOCAL FUNCTIONS                                                           */
/*---------------------------------------------------------------------------*/
static int
get_key_value(void)
{
  /* Function returns the actual key value. Pressed key will return '1' */
  int io_value = ~u32AHI_DioReadInput() & APP_BUTTONS_DIO_MASK;
  int k = 0;
  int key = 0;

  while(k < APP_E_BUTTON_NUM) {
    if(io_value & (1 << key_map[k])) {
      key |= (1 << k);
    }
    k++;
  }
  return key;
}
/* Process takes care of detecting key changes */
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(key_sampling, ev, data)
{
  PROCESS_BEGIN();
  static struct etimer et;
  static int previous_key_value = 0;
  static char debounce_check = 0;
  int current_key_value;

  etimer_set(&et, CLOCK_SECOND / 50);
  while(1) {
    PROCESS_WAIT_EVENT_UNTIL((ev == PROCESS_EVENT_TIMER) || (ev == PROCESS_EVENT_MSG));
    if(ev == PROCESS_EVENT_TIMER) {
      /* Handle sensor reading.   */
      PRINTF("Key sample\n");
      current_key_value = get_key_value();
      if(debounce_check != 0) {
        /* Check if key remained constant */
        if(previous_key_value == current_key_value) {
          sensors_changed(&button_sensor);
          key_value = current_key_value;
          debounce_check = 0;
        } else {
          /* Bouncing */
          previous_key_value = current_key_value;
        }
      } else
      /* Check for new key change */
      if(current_key_value != previous_key_value) {
        previous_key_value = current_key_value;
        debounce_check = 1;
      }
      etimer_reset(&et);
    } else {
      /* ev == PROCESS_EVENT_MSG */
      if(*(buttons_status_t *)data == BUTTONS_STATUS_NOT_ACTIVE) {
        /* Stop sampling */
        etimer_stop(&et);
      } else if((*(buttons_status_t *)data == BUTTONS_STATUS_ACTIVE)) {
        /* restart sampling */
        etimer_restart(&et);
      }
    }
  }
  PROCESS_END();
}

/*---------------------------------------------------------------------------*/
/* Sensor defintion for sensor module */
SENSORS_SENSOR(button_sensor, BUTTON_SENSOR, value, configure, status);
/*---------------------------------------------------------------------------*/