mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-09 23:54:32 +00:00
339 lines
15 KiB
C
339 lines
15 KiB
C
/* This file has been prepared for Doxygen automatic documentation generation.*/
|
|
/*! \file scsi_decoder.h *******************************************************
|
|
*
|
|
* \brief
|
|
* This file is the scsi decoder
|
|
*
|
|
* \addtogroup usbstick
|
|
*
|
|
* \author
|
|
* Atmel Corporation: http://www.atmel.com \n
|
|
* Support email: avr@atmel.com
|
|
******************************************************************************/
|
|
/*
|
|
Copyright (c) 2004 ATMEL Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
* Neither the name of the copyright holders nor the names of
|
|
contributors may be used to endorse or promote products derived
|
|
from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/**
|
|
\addtogroup usbstorage
|
|
@{
|
|
*/
|
|
#ifndef SCSI_DECODER_H_
|
|
#define SCSI_DECODER_H_
|
|
|
|
//_____ I N C L U D E S ____________________________________________________
|
|
|
|
|
|
//_____ M A C R O S ________________________________________________________
|
|
|
|
typedef struct
|
|
{
|
|
U8 key;
|
|
U8 asc;
|
|
U8 ascq;
|
|
} s_scsi_sense;
|
|
|
|
|
|
//_____ D E C L A R A T I O N S ____________________________________________
|
|
|
|
Bool scsi_decode_command (void);
|
|
|
|
/****************************************************************************/
|
|
/* Command for all SCSI device types */
|
|
/****************************************************************************/
|
|
|
|
#define SBC_CMD_TEST_UNIT_READY (0x00)
|
|
#define SBC_CMD_REQUEST_SENSE (0x03)
|
|
#define SBC_CMD_FORMAT_UNIT (0x04)
|
|
#define SBC_CMD_READ_6 (0x08)
|
|
#define SBC_CMD_INQUIRY (0x12)
|
|
#define SBC_CMD_MODE_SELECT_6 (0x15)
|
|
#define SBC_CMD_MODE_SENSE_6 (0x1A)
|
|
#define SBC_CMD_START_STOP_UNIT (0x1B)
|
|
#define SBC_CMD_RECEIVE_DIAGNOSTICS (0x1C)
|
|
#define SBC_CMD_SEND_DIAGNOSTIC (0x1D)
|
|
#define SBC_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL (0x1E)
|
|
#define SBC_CMD_READ_LONG (0x23)
|
|
#define SBC_CMD_READ_CAPACITY (0x25)
|
|
#define SBC_CMD_READ_CD_ROM_CAPACITY (0x25)
|
|
#define SBC_CMD_READ_10 (0x28)
|
|
#define SBC_CMD_WRITE_10 (0x2A)
|
|
#define SBC_CMD_VERIFY_10 (0x2F)
|
|
#define SBC_CMD_SYNCHRONIZE_CACHE (0x35)
|
|
#define SBC_CMD_WRITE_BUFFER (0x3B)
|
|
#define SBC_CMD_CHANGE_DEFINITION (0x40)
|
|
#define SBC_CMD_READ_TOC (0x43)
|
|
#define SBC_CMD_MODE_SELECT_10 (0x55)
|
|
#define SBC_CMD_RESERVE_10 (0x56)
|
|
#define SBC_CMD_RELEASE_10 (0x57)
|
|
#define SBC_CMD_MODE_SENSE_10 (0x5A)
|
|
|
|
#define SBC_CONTROL_BYTE (0x00)
|
|
#define SBC_CMD_DIR_IN (0x80)
|
|
#define SBC_CMD_DIR_OUT (0x00)
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Sense Key Code */
|
|
/****************************************************************************/
|
|
#define SBC_SENSE_KEY_NO_SENSE (0x00)
|
|
#define SBC_SENSE_KEY_RECOVERED_ERROR (0x01)
|
|
#define SBC_SENSE_KEY_NOT_READY (0x02)
|
|
#define SBC_SENSE_KEY_MEDIUM_ERROR (0x03)
|
|
#define SBC_SENSE_KEY_HARDWARE_ERROR (0x04)
|
|
#define SBC_SENSE_KEY_ILLEGAL_REQUEST (0x05)
|
|
#define SBC_SENSE_KEY_UNIT_ATTENTION (0x06)
|
|
#define SBC_SENSE_KEY_DATA_PROTECT (0x07)
|
|
#define SBC_SENSE_KEY_BLANK_CHECK (0x08)
|
|
#define SBC_SENSE_KEY_VENDOR_SPECIFIC (0x09)
|
|
#define SBC_SENSE_KEY_COPY_ABORTED (0x0A)
|
|
#define SBC_SENSE_KEY_ABORTED_COMMAND (0x0B)
|
|
#define SBC_SENSE_KEY_VOLUME_OVERFLOW (0x0D)
|
|
#define SBC_SENSE_KEY_MISCOMPARE (0x0E)
|
|
|
|
/****************************************************************************/
|
|
/* ASC code assignments */
|
|
/****************************************************************************/
|
|
#define SBC_ASC_NO_ADDITIONAL_SENSE_INFORMATION (0x00)
|
|
#define SBC_ASC_LOGICAL_UNIT_NOT_READY (0x04)
|
|
#define SBC_ASC_INVALID_FIELD_IN_CDB (0x24)
|
|
#define SBC_ASC_WRITE_PROTECTED (0x27)
|
|
#define SBC_ASC_FORMAT_ERROR (0x31)
|
|
#define SBC_ASC_INVALID_COMMAND_OPERATION_CODE (0x20)
|
|
#define SBC_ASC_NOT_READY_TO_READY_CHANGE (0x28)
|
|
#define SBC_ASC_MEDIUM_NOT_PRESENT (0x3A)
|
|
|
|
/****************************************************************************/
|
|
/* ASCQ code assignments */
|
|
/****************************************************************************/
|
|
#define SBC_ASCQ_FORMAT_COMMAND_FAILED (0x01)
|
|
#define SBC_ASCQ_INITIALIZING_COMMAND_REQUIRED (0x02)
|
|
#define SBC_ASCQ_OPERATION_IN_PROGRESS (0x07)
|
|
|
|
|
|
/****************************************************************************/
|
|
/* REQUEST SENSE PARAMETERS */
|
|
/****************************************************************************/
|
|
#define SBC_RESPONSE_CODE_SENSE (0x70)
|
|
#define SBC_ADDITIONAL_SENSE_LENGTH (0x0A)
|
|
#define SBC_COMMAND_SPECIFIC_INFORMATION_3 (0x00)
|
|
#define SBC_COMMAND_SPECIFIC_INFORMATION_2 (0x00)
|
|
#define SBC_COMMAND_SPECIFIC_INFORMATION_1 (0x00)
|
|
#define SBC_COMMAND_SPECIFIC_INFORMATION_0 (0x00)
|
|
#define SBC_FIELD_REPLACEABLE_UNIT_CODE (0x00)
|
|
#define SBC_SENSE_KEY_SPECIFIC_2 (0x00)
|
|
#define SBC_SENSE_KEY_SPECIFIC_1 (0x00)
|
|
#define SBC_SENSE_KEY_SPECIFIC_0 (0x00)
|
|
|
|
/******* number of bytes of READ CAPACITY response *********/
|
|
#define SBC_READ_CAPACITY_LENGTH (0x08)
|
|
|
|
|
|
/****************************************************************************/
|
|
/*MODE SENSE and REQUEST SENSE DEFINITIONS */
|
|
/****************************************************************************/
|
|
|
|
/*************** Direct access medium type ****************/
|
|
#define SBC_DEFAULT_MEDIUM_TYPE (0x00)
|
|
#define SBC_FLEXIBLE_DISK_SINGLE_SIDED_UNSPECIFIED (0x01)
|
|
#define SBC_FLEXIBLE_DISK_DOUBLE_SIDED_UNSPECIFIED (0x02)
|
|
|
|
#define SBC_MEDIUM_TYPE SBC_DEFAULT_MEDIUM_TYPE
|
|
|
|
#define SBC_DEV_SPEC_PARAM_WR_ENABLE (0x00)
|
|
#define SBC_DEV_SPEC_PARAM_WR_PROTECT (0x80)
|
|
#define SBC_BLOCK_DESCRIPTOR_LENGTH (0x00)
|
|
|
|
#define SBC_MSK_DBD (0x08)
|
|
#define SBC_MSK_PAGE_CONTROL (0xC0)
|
|
#define SBC_MSK_PAGE_CODE (0x3F)
|
|
|
|
|
|
/************ General Page Code paramaters *****************/
|
|
#define SBC_PAGE_CODE_READ_WRITE_ERROR_RECOVERY (0x01)
|
|
#define SBC_PAGE_CODE_FORMAT_DEVICE (0x03)
|
|
#define SBC_PAGE_CODE_FLEXIBLE_DISK (0x05)
|
|
#define SBC_PAGE_CODE_INFORMATIONAL_EXCEPTIONS (0x1C)
|
|
#define SBC_PAGE_CODE_ALL (0x3F)
|
|
|
|
|
|
#define SBC_PAGE_LENGTH_INFORMATIONAL_EXCEPTIONS (0x0A)
|
|
#define SBC_PAGE_LENGTH_READ_WRITE_ERROR_RECOVERY (0x0A)
|
|
#define SBC_PAGE_LENGTH_FLEXIBLE_DISK (0x1E)
|
|
#define SBC_PAGE_LENGTH_FORMAT_DEVICE (0x16)
|
|
|
|
|
|
|
|
#define SBC_MODE_DATA_LENGTH_INFORMATIONAL_EXCEPTIONS (SBC_PAGE_LENGTH_INFORMATIONAL_EXCEPTIONS + 2 + 3)
|
|
#define SBC_MODE_DATA_LENGTH_READ_WRITE_ERROR_RECOVERY (SBC_PAGE_LENGTH_READ_WRITE_ERROR_RECOVERY + 2 + 3 )
|
|
#define SBC_MODE_DATA_LENGTH_FLEXIBLE_DISK (SBC_PAGE_LENGTH_FLEXIBLE_DISK + 2 + 3 )
|
|
#define SBC_MODE_DATA_LENGTH_FORMAT_DEVICE (SBC_PAGE_LENGTH_FORMAT_DEVICE + 2 + 3 )
|
|
/*SBC_PAGE_LENGTH_FLEXIBLE_DISK + 2 + \*/
|
|
#define SBC_MODE_DATA_LENGTH_CODE_ALL (SBC_PAGE_LENGTH_READ_WRITE_ERROR_RECOVERY + 2 + \
|
|
SBC_PAGE_LENGTH_INFORMATIONAL_EXCEPTIONS + 2 + \
|
|
SBC_BLOCK_DESCRIPTOR_LENGTH + \
|
|
+ 3 )
|
|
|
|
/* SBC_MODE_DATA_LENGTH_FORMAT_DEVICE + 2 + \*/
|
|
/****** Information exceptions control page parameters *****/
|
|
#define SBC_MRIE (0x05)
|
|
|
|
/*************** Format device page parameters *************/
|
|
#define SBC_TRACK_PER_ZONE_MSB (0x00)
|
|
#define SBC_TRACK_PER_ZONE_LSB (0x00)
|
|
#define SBC_ALTERNATE_SECTORS_PER_ZONE_MSB (0x00)
|
|
#define SBC_ALTERNATE_SECTORS_PER_ZONE_LSB (0x00)
|
|
#define SBC_ALTERNATE_TRACK_PER_ZONE_MSB (0x00)
|
|
#define SBC_ALTERNATE_TRACK_PER_ZONE_LSB (0x00)
|
|
#define SBC_ALTERNATE_TRACK_PER_LU_MSB (0x00)
|
|
#define SBC_ALTERNATE_TRACK_PER_LU_LSB (0x00)
|
|
|
|
/************* Flexible Disk page Parameters ***************/
|
|
#define SBC_TRANSFER_RATE_MSB (0x13)
|
|
#define SBC_TRANSFER_RATE_LSB (0x88)
|
|
/* 1388h 5 Mbit/s */
|
|
/* 07D0h 2 Mbit/s */
|
|
/* 03E8h 1 Mbit/s */
|
|
/* 01F4h 500 kbit/s */
|
|
/* 012Ch 300 kbit/s */
|
|
/* 00FAh 250 kbit/s */
|
|
|
|
#define SBC_NUMBER_OF_HEAD (0x04)
|
|
#define SBC_SECTOR_PER_TRACK (0x20)
|
|
#define SBC_DATA_BYTE_PER_SECTOR_MSB (0x02)
|
|
#define SBC_DATA_BYTE_PER_SECTOR_LSB (0x00)
|
|
#define SBC_NUMBER_OF_CYLINDERS_MSB (0x01)
|
|
#define SBC_NUMBER_OF_CYLINDERS_LSB (0xE9)
|
|
#define SBC_STARTING_CYLINDER_WRITE_COMPENSATION_MSB (0x00)
|
|
#define SBC_STARTING_CYLINDER_WRITE_COMPENSATION_LSB (0x00)
|
|
#define SBC_STARTING_CYLINDER_REDUCED_WRITE_MSB (0x00)
|
|
#define SBC_STARTING_CYLINDER_REDUCED_WRITE_LSB (0x00)
|
|
#define SBC_DEVICE_STEP_RATE_MSB (0x00)
|
|
#define SBC_DEVICE_STEP_RATE_LSB (0x00)
|
|
#define SBC_DEVICE_STEP_PULSE_WIDTH (0x00)
|
|
#define SBC_HEAD_SETTLE_DELAY_MSB (0x00)
|
|
#define SBC_HEAD_SETTLE_DELAY_LSB (0x00)
|
|
#define SBC_MOTOR_ON_DELAY (0x00)
|
|
#define SBC_MOTOR_OFF_DELAY (0x00)
|
|
#define SBC_STEP_PULSE_PER_CYLINDER (0x00)
|
|
#define SBC_WRITE_COMPENSATION (0x00)
|
|
#define SBC_HEAD_LOAD_DELAY (0x00)
|
|
#define SBC_HEAD_UNLOAD_DELAY (0x00)
|
|
#define SBC_PIN34_PIN2 (0x00)
|
|
#define SBC_PIN4_PIN1 (0x00)
|
|
#define SBC_MEDIUM_ROTATION_RATE_MSB (0x00)
|
|
#define SBC_MEDIUM_ROTATION_RATE_LSB (0x00)
|
|
|
|
/************ Read/Write Error Recovery parameters**********/
|
|
#define SBC_READ_RETRY_COUNT (0x03)
|
|
#define SBC_WRITE_RETRY_COUNT (0x80)
|
|
#define SBC_CORRECTION_SPAN (0x00)
|
|
#define SBC_HEAD_OFFSET_COUNT (0x00)
|
|
#define SBC_DATA_STROBE_OFFSET (0x00)
|
|
#define SBC_RECOVERY_LIMIT_MSB (0x00)
|
|
#define SBC_RECOVERY_LIMIT_LSB (0x00)
|
|
|
|
|
|
/*_____ D E F I N I T I O N ________________________________________________*/
|
|
|
|
#define SBC_MAX_INQUIRY_DATA (0x60) // value ?
|
|
|
|
struct sbc_st_std_inquiry_data
|
|
{
|
|
Byte DeviceType : 5;
|
|
Byte PeripheralQualifier : 3;
|
|
|
|
Byte Reserved1 : 7;
|
|
Byte RemovableMedia : 1;
|
|
|
|
Byte Version;
|
|
|
|
Byte Reserved3 : 5;
|
|
Byte NormACA : 1;
|
|
Byte Obsolete0 : 1;
|
|
Byte AERC : 1;
|
|
|
|
Byte Reserved4[3];
|
|
|
|
Byte SoftReset : 1;
|
|
Byte CommandQueue : 1;
|
|
Byte Reserved5 : 1;
|
|
Byte LinkedCommands : 1;
|
|
Byte Synchronous : 1;
|
|
Byte Wide16Bit : 1;
|
|
Byte Wide32Bit : 1;
|
|
Byte RelativeAddressing : 1;
|
|
};
|
|
|
|
|
|
//_____ D E C L A R A T I O N S ____________________________________________
|
|
|
|
#define Sbc_send_failed() (g_scsi_status = COMMAND_FAILED)
|
|
#define Sbc_send_check_condition() (g_scsi_status = CHECK_CONDITION)
|
|
#define Sbc_send_good() (g_scsi_status = COMMAND_PASSED)
|
|
|
|
/*#define Sbc_valid_write_usb(length) ( Usb_set_TXRDY(), \
|
|
dCBWDataTransferLength -= length, \
|
|
while (!Usb_tx_complete()),\
|
|
Usb_clear_TXCMPL() )
|
|
*/
|
|
#define Sbc_build_sense(skey, sasc, sascq) ( g_scsi_sense.key = skey, \
|
|
g_scsi_sense.asc = sasc, \
|
|
g_scsi_sense.ascq = sascq )
|
|
|
|
#define Sbc_valid_write_usb(length) ( Usb_send_in(), \
|
|
g_scsi_data_remaining -= length )
|
|
|
|
|
|
#define COMMAND_PASSED 0x00
|
|
#define COMMAND_FAILED 0x01
|
|
#define CHECK_CONDITION 0x02
|
|
#define PHASE_ERROR 0x02
|
|
|
|
|
|
Bool sbc_inquiry (void);
|
|
Bool sbc_mode_sense( Bool sense_10 );
|
|
Bool sbc_mode_select_6 (void);
|
|
Bool sbc_request_sense (void);
|
|
Bool sbc_format (void);
|
|
Bool sbc_write_10 (void);
|
|
Bool sbc_read_10 (void);
|
|
Bool sbc_test_unit_ready(void);
|
|
Bool sbc_read_capacity(void);
|
|
Bool sbc_prevent_allow_medium_removal(void);
|
|
|
|
void sbc_lun_status_is_good(void);
|
|
void sbc_lun_status_is_busy_or_change(void);
|
|
void sbc_lun_status_is_not_present(void);
|
|
void sbc_lun_status_is_fail(void);
|
|
void sbc_lun_status_is_protected(void);
|
|
|
|
#endif /*SCSI_DECODER_H_ */
|
|
/** @} */
|