mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-05 04:05:34 +00:00
68 lines
2.3 KiB
Plaintext
68 lines
2.3 KiB
Plaintext
/**
|
|
\defgroup quickref Function quick reference
|
|
@{
|
|
|
|
\section sensors Sensor functions
|
|
|
|
Some sensors generate events when the sensors change. It is always
|
|
possible to query the state of a sensor through a set of query functions.
|
|
|
|
\subsection quickref-sensors-events Sensor events
|
|
|
|
- \ref sensors_event_button_down - the button has been pressed
|
|
- \ref sensors_event_button_up - the button has been depressed
|
|
- \ref sensors_event_humidity - a change in humidity has been detected
|
|
- \ref sensors_event_light - a change in light has been detected
|
|
- \ref sensors_event_motion - motion has been detected
|
|
- \ref sensors_event_sound - sound has been detected
|
|
- \ref sensors_event_temperature - temperature has changed
|
|
- \ref sensors_event_vibration - vibration has been detected
|
|
|
|
\subsection quickref-sensors-query Sensor query functions
|
|
|
|
- sensors_battery() - query the battery voltage level
|
|
- sensors_button() - query the on-board button
|
|
- sensors_mic() - query the microphone
|
|
- sensors_pir() - query the passive IR sensor (motion detector)
|
|
- sensors_radiosignal() - query the radio signal strength
|
|
- sensors_temp() - query the temperature sensor
|
|
- sensors_vib() - query the vibration sensor
|
|
|
|
\section quickref-leds LED functions
|
|
|
|
- leds_on() - turn LEDs on
|
|
- leds_off() - turn LEDs off
|
|
- leds_invert() - invert LEDs
|
|
- leds_blink() - blink all LEDs
|
|
|
|
\section quickref-beeper Beeper functions
|
|
|
|
- beep() - click the beeper
|
|
- beep_beep() - beep
|
|
- beep_down() - pitchbend down beep
|
|
- beep_quick() - a number of quick beeps
|
|
- beep_spinup() - pitchbend up beep
|
|
|
|
\section quickref-timers Timer functions
|
|
|
|
Contiki supports two types of timers: event timers and simple
|
|
timers. Event timers generates an event when the timer expires,
|
|
whereas the simple timer has to be actively queried to check when it
|
|
has expired.
|
|
|
|
\subsection quickref-etimer Event timers
|
|
|
|
- etimer_expired() - check if an event timer has expired
|
|
- etimer_set() - set an event timer
|
|
- etimer_reset() - set an expired event timer to the next interval
|
|
- etimer_restart() - restart an event timer from the current point in time
|
|
|
|
\subsection quickref-timer Simple timers
|
|
|
|
- timer_expired() - check if a simple timer has expired
|
|
- timer_set() - set a simple timer
|
|
- timer_reset() - set a simple event timer to the next interval
|
|
- timer_restart() - restart a simple timer from the current point in time
|
|
|
|
|
|
*//** @{ */ |