dos33fsprogs/demos/trogdor/qboot_sector.s

;	fast seek/multi-read
;	copyright (c) Peter Ferrie 2015-16

	; Paramaters for loading QLOAD

	sectors   = 14		; user-defined
	firsttrk  = 1		; user-defined, first track to read
	firstsec  = 0		; user-defined, first sector to read
	address   = $12		; user-defined
	entry     = $1200	; user-defined
	version   = 1

        ;memory usage:
        ;256 bytes ($200-2ff) static table
        grouped   = $200

	; stay away from interrupt vectors at $3fe !!!

        ;106 bytes ($300-369) static table
	preshift	= $300
        zvalue		= $fd         ; only during init
        znibble		= $fe         ; only during init
        zmask		= $ff         ; only during init

	WHICH_SLOT	= $DA

; $26/$27	sector read location (ROM)
; $3D		sector number (ROM)


; at entry (at least on AppleWin) A=1, X=60 (slot<<4), Y=0
; qkumba says cffa cards leave Y at $10
;	26/27 =	00/09
;	3D = 1

	; For Disk II booting, the firmware loads track0/sector0
	; to $800 and then jumps to $801

.org $800
	.byte	1		; number of sectors for ROM to load

boot_entry:
	; this code loads two sectors up to $10/$11

	; assume A=1 coming in here

	lsr			; check sector number
				; A=0, carry=1
	tay			; Y=0
	adc	#$0f		; A=$10 (destintation)

	sta	$27		; set or update address as needed
	cmp	#$12
				; 10  11  12  (1       1     1)
				; be, bf, c0  (1011 1011 1100)
				; so if hit $c000 we are done

	beq	done_load_2	; branch if loaded 2

	inc	$3d		; increment sector (faster to find)

	; call to the read routine in proper slot
	; using rts to jump indirect to
	; $CX5C

	; this routine reads sector in $3D on track in $41
	;	to address in $26/$27
	; when it's done it jumps back to $801
	stx	WHICH_SLOT	; save for later

	txa			; x is slot# << 4
	lsr
	lsr
	lsr
	lsr
	ora	#$c0		; slot to PROM base
	pha
	lda     #$5b            ;read-1
	pha
	rts			; return used to call $CX5C in DISK II ROM

done_load_2:

	; patch self modifying code for Q6L read

	txa
	ora	#$8c		; slot to Q6L
				; Q6L?
				; if slot 6, after this A is $EC
	; Y should be 2 here
patch_loop:
	iny
	ldx	patchtbl-3, Y
	sta	code_begin, X   ; replace placeholders with Q6L
				; BE02 = EC? lda c0ec
				; so sets to c08c (Q6L)

	bne	patch_loop

	; patch self-modifying code for turning motor off

	and	#$f8            ; MOTOROFF (c088) -> c0e8
	sta	slotpatch7+1

	; patch self-modifying code for turning motor on
	clc
	adc	#1            ; MOTORON (c089) -> c0e9
	sta	slotpatch9+1

	; patch self-modifying code for phase off

	eor	#9              ; PHASEOFF (c080)
	sta	slotpatch8+1

	ldx	#$3f
	stx	zmask
	inx
	ldy	#$7f

	bne	skip_ahead	; branch always

	; pad with zeros until $839
	; $839 is the entry point
	;	adjusts address at $8FE to be entry point
	;	jumps to boot 2
;.res	$839-*

;	lda	#>(entry-1)
;	pha
;	lda	#<(entry-1)
;	pha
;	jsr	preread
;	jmp	$1000		; stage2 entry point

patchtbl:
	.byte   <(slotpatch1+1), <(slotpatch2+1), <(slotpatch3+1)
	.byte	<(slotpatch4+1), <(slotpatch5+1), <(slotpatch6+1)
indextbl:	;the 0 also terminates the patchtbl list!
	.byte   0, 2, 1, 3


        ;construct denibbilisation table
        ;pre-shifted for interleave read

skip_ahead:
loopaa:
	sty	znibble
	tya
	asl
	bit	znibble
	beq	loopz
	ora	znibble
	eor	#$ff
	and	#$7e
loopa:
	bcs	loopz
	lsr
	bne	loopa
	dex
	txa
	asl
	asl
	sta	preshift-$16, Y
loopz:
	dey
	bne	loopaa

        ;construct 2-bit group table

	sty     zvalue
loopbb:
	lsr     zmask
	lsr     zmask
loopb:
	lda	indextbl, X
	sta	grouped, Y
	inc	zvalue
	lda	zvalue
	and	zmask
	bne	loopy
	inx
	txa
	and	#3
	tax
loopy:
	iny
	iny
	iny
	iny
	cpy	#3
	bcs	loopb
	iny
	cpy	#3
	bcc	loopbb
	lda	#>(entry-1)
	pha
	lda	#<(entry-1)
	pha
	jsr	preread

	; seek backward support
;	sty	startsec+1
;	sta	tmpadr+1
;	stx	total+1

	jmp	seekread

preread:

;copy post-read if necessary
;push post-read address here
;        pla
;        tax
;        pla
;        tay
;        lda     #>(postread-1)
;        pha
;        lda     #<(postread-1)
;        pha
;        tya
;        pha
;        txa
;        pha

	lda	#<(firsttrk*2)
	sta	phase+1
	ldx	#sectors
	lda	#address
	ldy	#firstsec
	rts



end_code:

.res	$8fe-*

; traditionally, entry point to jump to at end of loading
;	$1000 in this case
;*=$8fe
	.byte   $10, $00


.include "qboot_stage2.s"