mirror of
https://github.com/deater/dos33fsprogs.git
synced 2024-09-10 08:54:51 +00:00
Update dram notes
This commit is contained in:
parent
e7683e7021
commit
86bc4aafdb
@ -4,8 +4,160 @@
|
|||||||
\usepackage{colortbl}
|
\usepackage{colortbl}
|
||||||
\usepackage{multirow}
|
\usepackage{multirow}
|
||||||
|
|
||||||
|
\newcommand*\rot{\rotatebox{90}}
|
||||||
|
|
||||||
\begin{document}
|
\begin{document}
|
||||||
|
|
||||||
|
Sort of similar to how the Raspberry Pi started out as a GPU with a small
|
||||||
|
RAM processor tacked to the side, the Apple II design is very much
|
||||||
|
a TV-typewriter style video display that just happens to have a 6502
|
||||||
|
processor attached to give the display something to do.
|
||||||
|
|
||||||
|
Wozniak has said in an interview in retrospect he could have
|
||||||
|
gotten a lineary video memory map at the expense of two more chips.
|
||||||
|
Apparently at design time he had thought most people would use BASIC
|
||||||
|
on the machine, and since BASIC already supported things did not realize
|
||||||
|
what a hassle the map would be to assembly coders.
|
||||||
|
|
||||||
|
Note any time use text or plot/line need a lookup table.
|
||||||
|
My sprite code cheats and only supports drawing at an even rows because
|
||||||
|
it makes the code smaller, fater, and simpler
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Page 1 of The Apple II low-resolution graphics and text display share
|
||||||
|
the same 1k region of memory, from addresses {\tt \$400} to {\tt \$800}.
|
||||||
|
In an easy-to-use setup you would have a linear memory map where
|
||||||
|
location (0,0) would map to address {\tt \$400}, location (39,0) would map
|
||||||
|
to {\tt \$427}, and location (1,0) would be at {\tt \$428}.
|
||||||
|
This is not how it works though.
|
||||||
|
|
||||||
|
First, each memory location holds an 8-bit value.
|
||||||
|
In text mode this is just the ASCII value you want to print
|
||||||
|
(confusingly with the high bit set for plain text, the low-bit clear
|
||||||
|
does weird things like enable inverse (black-on-white) or flashing
|
||||||
|
modes).
|
||||||
|
So setting address {\tt \$400} to {\tt \$C1}
|
||||||
|
would put an 'A' (ASCII {\tt \$41})
|
||||||
|
in the upper left corner of the screen.
|
||||||
|
In low-res graphics mode the nibbles are used, so the {\tt \$C1} would
|
||||||
|
be intepreted as putting two blocks, one above each other, in the upper
|
||||||
|
left.
|
||||||
|
The top one would be color 1 (red) and the bottom color 12 (light green).
|
||||||
|
The colors are NTSC artifact colors, caused by outputting the raw bit
|
||||||
|
pattern out to the screen with the color burst enabled.
|
||||||
|
You can try this out yourself from BASIC by running
|
||||||
|
{\tt TEXT:HOME:POKE 1024,193} to see the text result, and
|
||||||
|
{\tt GR:POKE 1024,193} to see the graphcis result.
|
||||||
|
|
||||||
|
The next part that complicates things is the weird interleavings of
|
||||||
|
the addresses.
|
||||||
|
Note that Line 2 starts at {\tt \$480}, not {\tt \$428} as expected.
|
||||||
|
{\tt \$428} actually corresponds to line 16.
|
||||||
|
|
||||||
|
The reason for this craziness turns out to Steve Wozniak being especially
|
||||||
|
clever, and finding a way to get DRAM refresh essentially for free.
|
||||||
|
|
||||||
|
Early home computers often used static RAM (SRAM).
|
||||||
|
SRAM is easy to use, you just hook up the address and read/write lines,
|
||||||
|
then just read and write to memory.
|
||||||
|
It was very fast too.
|
||||||
|
So why use dynamic RAM (DRAM)?
|
||||||
|
Well SRAM uses 6 transistors per bit.
|
||||||
|
DRAM only uses 1 transistor (plus a capacitor to store the value).
|
||||||
|
So you can in theory fit 6 times the RAM in the same space, leading
|
||||||
|
to much cheaper costs and much better density.
|
||||||
|
What are the downsides of DRAM?
|
||||||
|
Typically it was slower.
|
||||||
|
Also that capacitor leaks away your memory.
|
||||||
|
Given enough time (on the order of seconds or so) and all of your RAM
|
||||||
|
will leak down to zero.
|
||||||
|
To combat that, you have to refresh your memory.
|
||||||
|
This essentially involves reading each memory value out faster
|
||||||
|
than it leaks away (due to the design of DRAM, reads are destructive,
|
||||||
|
so a read operation always reads out, recharges, then writes back
|
||||||
|
the value).
|
||||||
|
|
||||||
|
The act of refresh can be slow.
|
||||||
|
On many systems there was separate hardware to do the refresh, and
|
||||||
|
it often took over the memory bus to do this and your CPU would have
|
||||||
|
to pause while it was happening.
|
||||||
|
This is true of the original IBM PC.
|
||||||
|
If you ever look at cycle-level optimization on this platform you will
|
||||||
|
notice the coders have to take into account pauses caused by
|
||||||
|
memory refresh (the refresh tended to be conservative so some coders
|
||||||
|
would live dangerously and make refresh happen less often to increase
|
||||||
|
performance).
|
||||||
|
|
||||||
|
% Wozniak's article in Byte magazine, May 1977 (Volume 2, Number 5)
|
||||||
|
% Gayler: The Apple II Circuit discription
|
||||||
|
% 15-bit video address, 6 horiz 9 vert, increments, repeating 60Hz
|
||||||
|
% vert has 262 values, horiz has 65 (40 chars+25 horiz blank)
|
||||||
|
% value is loaded from proper place, and latched, 7 bits written out?
|
||||||
|
% Crazy, normally the 6502 runs at 978ns, but every 65th cycle
|
||||||
|
% it is extended to 1117ns to keep the video output in sync
|
||||||
|
% Which is why the average CPU freq of apple II is 1.020484MHz
|
||||||
|
% 192 dots vertical. 70 blanking
|
||||||
|
% Undstanding the Apple II by Sather
|
||||||
|
% interleaving, but also to not leave execessive holes in map
|
||||||
|
% In interview in Sather book Woz says could have had contiguous
|
||||||
|
% memory with 2 more chips.
|
||||||
|
|
||||||
|
Could have had contiguous memory with two more chips?
|
||||||
|
|
||||||
|
1MHz 6502 cpu clock two phases. During first phase processor is busy
|
||||||
|
with internal work and the memory bus is idle. So during this
|
||||||
|
time the video circuitry reads the memory and updates the display.
|
||||||
|
|
||||||
|
4116, refresh every two milliseconds. 2ms=500Hz
|
||||||
|
|
||||||
|
each column has 128 bytes
|
||||||
|
|
||||||
|
RA0-RA2 are the only ones that matter for correctness
|
||||||
|
|
||||||
|
RA0 = V0
|
||||||
|
RA1 = H2
|
||||||
|
RA2 = H0
|
||||||
|
|
||||||
|
654 3210
|
||||||
|
0x400 00 000 1000 000 0000
|
||||||
|
0x480 00 000 1001 000 0000
|
||||||
|
0x500 00 000 1010 000 0000
|
||||||
|
0x580 00 000 1011 000 0000
|
||||||
|
0x600 00 000 1100 000 0000
|
||||||
|
0x680 00 000 1101 000 0000
|
||||||
|
0x700 00 000 1110 000 0000
|
||||||
|
0x780 00 000 1111 000 0000
|
||||||
|
0x428 00 000 1000 010 1000
|
||||||
|
0x4a8 00 000 1001 010 1000
|
||||||
|
0x528 00 000 1010 010 1000
|
||||||
|
0x5a8 00 000 1011 010 1000
|
||||||
|
0x628 00 000 1100 010 1000
|
||||||
|
0x6a8 00 000 1101 010 1000
|
||||||
|
0x728 00 000 1110 010 1000
|
||||||
|
0x7a8 00 000 1111 010 1000
|
||||||
|
0x450,0x4d0,0x550,0x5d0,0x650,0x6d0,0x750,0x7d0,
|
||||||
|
|
||||||
|
127 values needed
|
||||||
|
|
||||||
|
0000 0000 0000 0000 = $0000
|
||||||
|
...
|
||||||
|
0011 1111 1000 0000 = $3f80
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
\input{table.tex}
|
\input{table.tex}
|
||||||
|
|
||||||
\end{document}
|
\end{document}
|
||||||
|
@ -25,12 +25,33 @@ int main(int argc, char **argv) {
|
|||||||
|
|
||||||
printf("\\begin{table*}\n");
|
printf("\\begin{table*}\n");
|
||||||
|
|
||||||
printf("\\caption{Sample lores map \\label{table:loresmap}}\n");
|
printf("\\caption{Apple II lores memory, showing the interleaving"
|
||||||
|
" of the 40x48 display.\\label{table:loresmap}}\n");
|
||||||
printf("\\centering\n");
|
printf("\\centering\n");
|
||||||
printf("\\begin{tabular}{|l|l|");
|
printf("\\begin{tabular}{|l|l|");
|
||||||
for(i=0;i<COLUMNS;i++) printf("c|");
|
for(i=0;i<COLUMNS;i++) printf("c|");
|
||||||
printf("}\n");
|
printf("}\n");
|
||||||
|
|
||||||
|
printf("\\hline\n");
|
||||||
|
|
||||||
|
printf("& &");
|
||||||
|
for(i=0;i<COLUMNS;i++) {
|
||||||
|
printf("\\rot{\\tt \\$%02X} ",i);
|
||||||
|
if (i<COLUMNS-1) printf("&");
|
||||||
|
}
|
||||||
|
printf("\\\\\n");
|
||||||
|
printf("\\hline\n");
|
||||||
|
|
||||||
|
printf("& &");
|
||||||
|
for(i=0;i<COLUMNS;i++) {
|
||||||
|
printf("\\rot{%d} ",i);
|
||||||
|
if (i<COLUMNS-1) printf("&");
|
||||||
|
}
|
||||||
|
printf("\\\\\n");
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
for(j=0;j<ROWS;j++) {
|
for(j=0;j<ROWS;j++) {
|
||||||
if (j%2==0) {
|
if (j%2==0) {
|
||||||
printf("\\hline\n");
|
printf("\\hline\n");
|
||||||
|
Loading…
Reference in New Issue
Block a user