; Mockingboad programming:
; + Has two 6522 I/O chips connected to two AY-3-8910 chips
; + Optionally has some speech chips controlled via the outport on the AY
; + Often in slot 4
;	TODO: how to auto-detect?
; References used:
;	http://macgui.com/usenet/?group=2&id=8366
;	6522 Data Sheet
;	AY-3-8910 Data Sheet

;========================
; Mockingboard card
; Essentially two 6522s hooked to the Apple II bus
; Connected to AY-3-8910 chips
;	PA0-PA7 on 6522 connected to DA0-DA7 on AY
;	PB0     on 6522 connected to BC1
;	PB1	on 6522 connected to BDIR
;	PB2	on 6522 connected to RESET


; left speaker
MOCK_6522_ORB1	EQU	$C400	; 6522 #1 port b data
MOCK_6522_ORA1	EQU	$C401	; 6522 #1 port a data
MOCK_6522_DDRB1	EQU	$C402	; 6522 #1 data direction port B
MOCK_6522_DDRA1	EQU	$C403	; 6522 #1 data direction port A

; right speaker
MOCK_6522_ORB2	EQU	$C480	; 6522 #2 port b data
MOCK_6522_ORA2	EQU	$C481	; 6522 #2 port a data
MOCK_6522_DDRB2	EQU	$C482	; 6522 #2 data direction port B
MOCK_6522_DDRA2	EQU	$C483	; 6522 #2 data direction port A

; AY-3-8910 commands on port B
;						RESET	BDIR	BC1
MOCK_AY_RESET		EQU	$0	;	0	0	0
MOCK_AY_INACTIVE	EQU	$4	;	1	0	0
MOCK_AY_READ		EQU	$5	;	1	0	1
MOCK_AY_WRITE		EQU	$6	;	1	1	0
MOCK_AY_LATCH_ADDR	EQU	$7	;	1	1	1


	;========================
	; Mockingboard Init
	;========================
	; Initialize the 6522s
	; set the data direction for all pins of PortA/PortB to be output

mockingboard_init:
	lda	#$ff		; all output (1)
	sta	MOCK_6522_DDRB1
	sta	MOCK_6522_DDRA1
	sta	MOCK_6522_DDRB2
	sta	MOCK_6522_DDRA2
	rts

	;======================
	; Reset Left AY-3-8910
	;======================
reset_ay_left:
	lda	#MOCK_AY_RESET
	sta	MOCK_6522_ORB1
	lda	#MOCK_AY_INACTIVE
	sta	MOCK_6522_ORB1
	rts

	;======================
	; Reset Right AY-3-8910
	;======================
reset_ay_right:
	lda	#MOCK_AY_RESET
	sta	MOCK_6522_ORB2
	lda	#MOCK_AY_INACTIVE
	sta	MOCK_6522_ORB2
	rts


;	Write sequence
;	Inactive -> Latch Address -> Inactive -> Write Data -> Inactive

	;=======================
	; Write Right AY-3-8910
	;=======================
	; register in Y
	; value in X

write_ay_right:
	; address
	sty	MOCK_6522_ORA1		; put address on PA
	lda	#MOCK_AY_LATCH_ADDR	; latch_address on PB
	sta	MOCK_6522_ORB1
	lda	#MOCK_AY_INACTIVE	; go inactive
	sta	MOCK_6522_ORB1

	; value
	stx	MOCK_6522_ORA1		; put value on PA
	lda	#MOCK_AY_WRITE		; write on PB
	sta	MOCK_6522_ORB1
	lda	#MOCK_AY_INACTIVE	; go inactive
	sta	MOCK_6522_ORB1

	rts

	;=======================
	; Write Left AY-3-8910
	;=======================
	; register in X
	; value in Y

write_ay_left:
	; address
	sty	MOCK_6522_ORA2		; put address on PA
	lda	#MOCK_AY_LATCH_ADDR	; latch_address on PB
	sta	MOCK_6522_ORB2
	lda	#MOCK_AY_INACTIVE	; go inactive
	sta	MOCK_6522_ORB2

	; value
	stx	MOCK_6522_ORA2		; put value on PA
	lda	#MOCK_AY_WRITE		; write on PB
	sta	MOCK_6522_ORB2
	lda	#MOCK_AY_INACTIVE	; go inactive
	sta	MOCK_6522_ORB2

	rts

	;=======================================
	; clear ay -- clear all 14 AY registers
	; should silence the card
	;=======================================
clear_ay_left:
	ldy	#14
	ldx	#0
clear_ay_left_loop:
	jsr	write_ay_left
	dey
	bpl	clear_ay_left_loop
	rts

	;=======================================
	; clear ay -- clear all 14 AY registers
	; should silence the card
	;=======================================
clear_ay_right:

	ldy	#14
	ldx	#0
clear_ay_right_loop:
	jsr	write_ay_right
	dey
	bpl	clear_ay_right_loop
	rts