Commit Graph

85 Commits

Author SHA1 Message Date
Oliver Schmidt
48efd846f5 Allow lower case input too.
The ][ doesn't have lower case but the //e defaults to lower case so we need to allow both upper case and lower case (and convert to lower case before DNS lookup).
2017-05-16 22:56:38 +02:00
Oliver Schmidt
3193774a31 Use actual Delete key for delete (too). 2017-05-12 13:30:02 +02:00
Oliver Schmidt
2566a26253 Some minor changes. 2017-05-07 20:53:04 +02:00
Oliver Schmidt
344d76829a Made get_key_if_available actually work.
On the A2 get_key deletes any already pressed key. Therefore it's a bad idea(tm) to call it to retrieve the key detected in get_key_if_available. So now get_key_if_available insteads retrieves the key on its own via direct hw access. This was already done the very same way in check_for_abort_key. And apart from not working as expected the benefit of get_key displaying a cursor wasn't useful here anyway because get_key was supposed to return right away with the pressed key so the cursor wouldn't have been visible at all.
2017-05-03 20:51:06 +02:00
Oliver Schmidt
9dd014cded Replaced jsr get_key_ip65 with jsr get_key.
- The C64 variant already used get_key and I don't see a reason why the A2 has different requirements when it comes to the question when it is necessary to call ip65_process.

- On the A2 get_key does display a cursor while get_key_ip65 does not. However get_filtered_input is used to get a string of characters. This is exactly the scenario asking for a cursor.
2017-05-03 20:39:59 +02:00
Oliver Schmidt
c4f196c71b Check for W5100 first.
Check first for a W5100 as checking for the CS8900A / LAN91C96 on similiar ports accidentally screws up a potential W5100 shared access (https://github.com/a2retrosystems/mxp/wiki/W5100-Shared-Access).
2016-09-18 17:57:13 +02:00
Oliver Schmidt
aea88482dd Added compatibility with W5100 shared access.
If the setup of socket 0 to 3 with 4+2+1+1KB is detected then the W5100 is _not_ initialized, otherwise it does set up socket 0 and 1 with 4KB each. Either way socket 0 is used - now with 4KB instead of 8KB as before.
2016-04-05 20:55:45 +02:00
Christian Groessler
504a880d03 replace absolute values with defines from atari.inc 2015-09-09 14:04:07 +02:00
Oliver Schmidt
cd0506d862 Added support for the ATARI 8-bit with Dragon Cart.
The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 15:19:52 +02:00
Oliver Schmidt
8960e0bebb Improved VBL handler installation check.
Check hibyte of old handler in case it happens to be placed on a page boundary (+ minor beautifications).
2015-08-28 14:42:29 +02:00
Oliver Schmidt
da593744f4 Minor beautifications. 2015-08-28 14:38:50 +02:00
Oliver Schmidt
a3305bb54d Added option to set ethernet slot on the Apple 2. 2015-07-08 15:46:28 +02:00
Oliver Schmidt
e5161061cc Allow fixup to be repeated.
There are scenarios in which it is beneficial to search for an Etherne chip at several i/o locations. To do so the chip initialization is performed at several i/o locations until it succeeds. In order to allow for that operation model the i/o location fixup needs to be repeatable.

Note: This won't work with the RR-Net because the fixup bits overlap with the chip i/o bits.
2015-07-08 15:42:42 +02:00
Oliver Schmidt
8279ef4d63 Introduced IP65 "combo" libraries.
Up to now every IP65 library contained exactly one Ethernet driver. In scenarios without strict memory limitations I might however be benefitial to have an IP65 library containing all Ethernet drivers available for a given target.

The Ethernet hardware detection that was already present before is used in this scenario to try to initialize one Ethernet driver after the other until one succeeds. If all drivers fail to initialize the user gets informed as usual.

The WIZ811MJ driver was primarily introduced for orthogonality reasons. There are however at least two W5100-based prototypes for the C64 so it makes at least some sense. The name was chosen as sort of placeholder for "something containing a W5100 chip".
2015-07-08 10:13:08 +02:00
Oliver Schmidt
c1df88daa1 Remove received packet(s) to allow to send one.
Behave just like the CS8900A driver: Both the CS8900A and the LAN91C96 dynamically share a buffer for received packets and packets to be send. If the chip is exposed to a network with a lot of broadcasts the shared buffer might fill quicker with received packets than the 6502 reads them (via polling). So we might need to drop some received packets in order to be able to send anything at all.
2015-04-13 21:09:15 +02:00
Oliver Schmidt
5c7ccf0fca Reduced size of typical binary.
The pretty small check_for_abort_key is used by DHCP and DNS which means it is used by about every IP65 program. The pretty large get_filtered_input on the other hand is very seldom used so it makes sense to put the latter in a separate module to keep it from ending up in binaries unused.
2015-02-16 22:29:22 +01:00
Oliver Schmidt
7c3235b5bb Added LC2UC conversion for the Apple ][ and replaced column-setting-hack with printing a carriage return. 2015-02-16 17:50:26 +01:00
Oliver Schmidt
5aa1fab89f Fixed hardware detection.
The previous chip detection was inspired by the old IP65 driver code. For some reason it didn't work as expected. The new code is simpler and based on this statement in the chip datasheet: "The upper byte always reads as 33h and can be used to help determine the I/O location of the LAN91C96."
2014-07-12 11:27:01 +02:00
Oliver Schmidt
2ae35b34d9 Replaced custom zeropage variables with cc65 default zeropage variables. 2014-07-07 20:56:21 +02:00
Oliver Schmidt
e06c02e4a3 1. Replaced IP65 Ethernet drivers with Contiki drivers.
* CS8900A
The Contiki driver allows to adjust the chip base addr at runtime (which  allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames.

* LAN91C96
The Contiki driver was used by IP65 more or less unchanged in the first place.

* W5100
The Contiki driver allows to adjust the chip base addr at runtime (which  allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-13 00:00:53 +02:00
Oliver Schmidt
8eca213d79 Improved file name consistency. 2014-04-28 18:50:02 +02:00
Oliver Schmidt
0f7542c654 Removed custom linker config files. 2014-04-28 18:41:54 +02:00
Oliver Schmidt
a3f8f1d015 Removed explicit copying of defaults.
It's the very purpose of the DATA segment to consolidate all items that potentially need to be copied from ROM to RAM. So there's no need to / point in doing that on a per-item-base.
2014-04-27 19:17:48 +02:00
Oliver Schmidt
2cc72c406d Removed several custom segments. 2014-04-27 18:59:58 +02:00
Oliver Schmidt
f1dfea1e7d Added A2 'timer_seconds' dummy.
The implementation just always returns 0 thus actually disabling timeouts.
2014-04-13 18:47:13 +02:00
Oliver Schmidt
6b50c4b638 Allow all test programs to run on the VIC20:
- Added exit_to_basic symbol.
- Aligned linker config with C64 linker config.
- Made switch to lower charset compatible.

Allow all test programs to run with LANceGS card.

Aligned C64 input file name.
2013-12-29 23:39:35 +01:00
Oliver Schmidt
e54bb71bcc General source code cleanup.
- Tab chars were partially used with the unusual width of two blanks. I removed them altogether.
- Line endings were inconsistent even iniside individual files. I normalized them.
- I introduced a consistent coding style regarding comment indenting and blank line usage.
- I removed trailing spaces.
- I removed newlines following unnamed labels.
- ...
2013-12-27 14:57:56 +01:00
Oliver Schmidt
e1c4a4caf6 Some more cleanup.
- Removed VT100 font belonging to NETBOOT65.
- Removed machine / cart specific tests.
- Have Makefiles ignore errors on the clean goal.
2013-12-27 14:48:16 +01:00
Oliver Schmidt
7ce0ff2023 Removed several files that seem to rather belong to NETBOO65. 2013-12-17 22:28:49 +01:00
Oliver Schmidt
f6cf86a025 Some test program cleanup.
- Simplify Makefile by allowing to use suffix '_tcp' to denote the requirement to link against TCP-capable IP65 lib.
- Remove 'test' or 'test_' prefix from test program names - every program in 'test' is a test program.
- Have some more test programs switch to lower case charset on the C64.
- I'm no Ruby guy so don't rely on Ruby for building disk images.
2013-12-15 22:50:01 +01:00
Oliver Schmidt
ecdaac2ff8 Distilled IP65 out of NETBOOT65. 2013-12-13 22:24:03 +01:00
jonnosan
401effa912 restructure source tree to get better split between client (ca65) and server (ruby) files
git-svn-id: http://svn.code.sf.net/p/netboot65/code@13 93682198-c243-4bdb-bd91-e943c89aac3b
2009-01-22 01:15:28 +00:00
jonnosan
b035d8a091 git-svn-id: http://svn.code.sf.net/p/netboot65/code@4 93682198-c243-4bdb-bd91-e943c89aac3b 2009-01-10 12:04:57 +00:00
jonnosan
b2d1f1875f add credits for IP65 files, clean up Makefiles
git-svn-id: http://svn.code.sf.net/p/netboot65/code@2 93682198-c243-4bdb-bd91-e943c89aac3b
2009-01-10 10:18:51 +00:00
jonnosan
5456aff2a8 git-svn-id: http://svn.code.sf.net/p/netboot65/code@1 93682198-c243-4bdb-bd91-e943c89aac3b 2009-01-10 08:41:35 +00:00