mirror of
https://github.com/bobbimanners/emailler.git
synced 2024-08-20 17:29:45 +00:00
git-svn-id: http://svn.code.sf.net/p/netboot65/code@59 93682198-c243-4bdb-bd91-e943c89aac3b
31 lines
1.3 KiB
Plaintext
31 lines
1.3 KiB
Plaintext
NETBOOT65
|
|
|
|
|
|
TO USE WITH VICE:
|
|
1) unzip the archive somewhere on your local hard drive
|
|
2) start the bin/tftp_server.rb script (e.g. by double-clicking on it)
|
|
3) run VICE with the rrnetboot.bin cartridge attached (e.g. "x64.exe -cartrr clients\rrnetboot.bin")
|
|
|
|
When rrnetboot.bin boots, it does the following
|
|
|
|
- broadcasts a DHCP request to get an IP address allocated
|
|
- broadcasts a TFTP request for a directory listing for anything matching "*.PRG"
|
|
- displays a menu containing whatever files the TFTP server lists as available.
|
|
- Once a file is selected, it is downloaded via TFTP, and executed
|
|
|
|
ADDING MORE FILES
|
|
|
|
Only single-load files can be used (this may change in a future release). The files need to be in "PRG" format, i.e.the first 2 bytes of the file must be
|
|
the load address (little-endian, i.e. low/high). The files also need to have a file extension of ".PRG" (in upper case, if your operating system of choice
|
|
is case sensitive).
|
|
|
|
Files need to be placed in the 'boot/' folder.
|
|
|
|
Due to a limitation in the menu selection code, only the first 128 PRG files in the boot/ folder can be selected.
|
|
|
|
|
|
REQUIREMENTS:
|
|
1) RR-NET or compatible adaptor (to use under VICE, you will need pcap or winpcap installed)
|
|
2) a DHCP server on your network
|
|
3) a working ruby installation
|