This is an alternate approach proposed by Sean Nolan in 1987 which
allows placing the driver files in a subdirectory of the root volume
to avoid clutter and file ordering issues. Only a SETUP.SYSTEM file is
needed at the top level, and the drivers go into a SETUPS/ directory.
All drivers here (except QUIT.SYSTEM and SETUP.SYSTEM itself) have
alternate forms built into the /DRIVERS/SETUPS/ directory as XYZ.SETUP
instead of XYZ.SYSTEM. If you choose to use SETUP.SYSTEM, place these
.SETUP files in your SETUPS/ directory. The naming doesn't matter -
any SYS or BIN file can be used - but this convention makes
distribution easier. These .SETUP files do **NOT** chain to the next
file - that's handled by SETUP.SYSTEM itself.
Resolves#16
Previously, the boot volume was shown first, but then tab would cycle
from the highest priority volume to the lowest. This would be awkward
if the boot volume was not the highest priority volume. For example,
with these devices (listed lowest to highest priority, like DEVLST),
/HD1 is the boot volume but the RAM disks are highest priority:
(low) /FLOPPY2 /FLOPPY1 /HD4 /HD3 /HD2 /HD1 /RAMWORKS /RAM (high)
Prior to this fix, it would cycle:
/HD1 /RAM /RAMWORKS /HD1 /HD2 /HD3 /HD4 /FLOPPY1 /FLOPPY2 /RAM ...
After this fix, it will cycle:
/HD1 /HD2 /HD3 /HD4 /FLOPPY1 /FLOPPY2 /RAM /RAMWORKS /HD1 ...
To fit, a little bit of code golfing was necessary.
