prog8/examples/cx16/zsound/zsmplayer.txt

196 lines
7.5 KiB
Plaintext
Raw Normal View History

;..............
; init_player :
; ===========================================================================
; Arguments: (none)
; Returns: (none)
; Affects: A
; ---------------------------------------------------------------------------
; Call this before using any of the other routines.
;
; Initializes the memory locations used by ZSM player to a stopped playback
; state, with the data pointer pointing at a dummy "end-of-data" command frame.
;............
; playmusic :
; ===========================================================================
; Arguments: none
; Returns: none
; Affects: See stepmusic
; ---------------------------------------------------------------------------
; 60hz frontend for stepmusic.
; Call it once per frame to play ZSM music.
;
; Playmusic calls stepmusic however many times is determined from the ZSM tick
; rate header information. This function does not "smooth" time - i.e. it
; just calls stepmusic N times in a row. For more accurate timing
; you should generate your own timing source and call stepmusic directly.
;
; NOTE: playmusic calls stepmusic, WHICH IS NOT IRQ SAFE! Use playmusic_IRQ instead
; if you wish to run the music update during the IRQ handler, or else your
; handler should save and restore the VERA ctrl register and the address
; registers for the data0 data port.
;................
; playmusic_IRQ :
; ===========================================================================
; IRQ-safe version of playmusic, which restores VERA registers and the active
; HiRAM bank.
;
; It does NOT save or restore the CPU registers. Your IRQ handler should
; pull those from the stack prior to RTI as usual if not jumping into the
; Kernal's once per frame routine.
;
; Alternatively, you can use this interface as a VERA-safe call from outside
; of IRQ handlers. A,X,and Y are still clobbered by stepmusic.
;............
; stepmusic :
; ===========================================================================
; Arguments: (none)
; Returns: Carry flag: (currently broken) 0=playing, 1=stopped or looped
; Affects: A,X,Y, VERA CTRL and data port 0 address registers
; ---------------------------------------------------------------------------
; Advances the music by one tick.
; Music must be initialized by startmusic before this will have any effect.
;
; This routine may be removed from the API in future revisions!
;
; Call as many times per frame as required by the ZSM's playback rate.
; (usually 60Hz - once per frame)
; THIS ROUTINE IS NOT SAFE to call directly during IRQ, as it clobbers VERA
; registers w/o fixing them (for speed reasons). If your program
; is designed to run the music player during an IRQ, use one of the IRQ-safe
; wrapper functions that save and restore VERA before calling this
; core routine, or else be sure to save the states of the affected VERA registers
;-----------------------------------------------------[Music Control]--------
;.............
; startmusic :
; ===========================================================================
; Arguments:
; A : HIRAM bank of tune
; XY : Memory address of beginning of ZSM header
; Returns: Carry flag: 0=success, 1=fail
; Affects: A,X,Y
; ---------------------------------------------------------------------------
; Uses the ZSM header to determine the default playback parameters.
; Copies them into the active data structures, and adjusts header pointers
; such as loop and PCM (future) sample bank offsets relative to where the
; ZSM was actually loaded into memory.
;
; Calls setmusicspeed with the song's default play speed from header.
; Defaults the looping behavior based on the ZSM being played. If the tune
; contains a loop, the playback is set for infinite loop mode. If it does
; not, the loop pointer is set to the beginning of the tune, but looping
; remains disabled.
; You may call set_loop, force_loop, or disable_loop to modify these defaults
; afterwards.
;............
; stopmusic :
; ===========================================================================
; Arguments: (none)
; Returns: (none)
; Affects: (none)
; ---------------------------------------------------------------------------
; Halts music playback, silences all voices used by the current tune,
; and clears music channel mask
; ------------------------------------------------[On-The-Fly Controls]------
;................
; setmusicspeed :
; ===========================================================================
; Arguments:
; X/Y : Playback speed in Hz. (x=lo, y=hi)
; Returns: (none)
; Affects: A,X,Y
; ---------------------------------------------------------------------------
; Converts Hz into ticks/frame, and adjusts playback speed to the new rate.
; Setting a 60hz song to play back at 120hz will play at double speed and
; setting it to 30hz will play at 1/2 speed.
; (I suppose I should make an accessor function to return the native speed
; of a ZSM so that you don't have to guess in order to make calculated speed
; changes)
;.............
; force_loop :
; ===========================================================================
; Arguments: .A = number of times to loop the music. 0 = infinite
; Returns: none
; Affects: none
; ---------------------------------------------------------------------------
; Note that if the music was intended to be a one-shot playback (i.e. contains
; no loop), this will force looping play of the entire song. Use set_loop
; to modify the looper's behavior without forcing looping play of non-looped
; songs.
;...........
; set_loop :
; ===========================================================================
; Arguments: .A = number of times to loop the music. 0 = infinite
; Returns: none
; Affects: none
; ---------------------------------------------------------------------------
; Sets the number of repeats that loopback mode will perform after the current
; pass through the song is finished. If the playback mode is one-shot (no looping)
; then this will have no effect.
;...............
; disable_loop :
; ===========================================================================
; Arguments: none
; Returns: none
; Affects: none
; ---------------------------------------------------------------------------
; When music reaches EOF, playback will stop, regardless of loops in the tune.
; Has no effect if looping was not already enabled.
;-----------------------------------------------------[Information]----------
;...............
; set_callback :
; ===========================================================================
; Arguments:
; .XY = address of callback function
; Returns: none
; Affects: none
; ---------------------------------------------------------------------------
; Sets a notification callback whenever a tune finishes or loops.
; The callback passes the following parameters:
; Z=0 if music is stopped, Z=1 if music is playing
; .A = number of remaining loops
;.................
; clear_callback :
; ===========================================================================
; Arguments: none
; Returns: none
; Affects: A
; ---------------------------------------------------------------------------
; Disables the EOF notification callback
;..................
; get_music_speed :
; ===========================================================================
; Arguments: none
; Returns: .XY = song's play rate in Hz
; Affects: none
; ---------------------------------------------------------------------------
; This function returns the default playback rate in Hz of the active song.
; This is NOT the current playback speed, but the speed in the song's header.