diff --git a/rom5x/B0_CFF9_switch_cmd.s b/rom5x/B0_CFF9_switch_cmd.s
index 67c637c..62bfa5d 100644
--- a/rom5x/B0_CFF9_switch_cmd.s
+++ b/rom5x/B0_CFF9_switch_cmd.s
@@ -1,6 +1,13 @@
+; This is the dispatch routine to call the primary ROM 5X
+; functions of intercepting RESET and the boot process.
+; If one enters at $CFF9, the command $A9 is loaded and
+; we go to the BELL1 hijack.  If entering at $CFFA, we
+; load the command $EA and proceed the same way.
+; thus we get two dispatch codes in 6 bytes.
+
 #include "iic+.defs"
 .text
-* = $cff9 ; 7 bytes available here
+* = $cff9 ; 7 bytes available here, but don't count on $CFFF
 	lda #$a9	; lda opcode
 	nop		; jmp/jsr $cffa does lda #$ea
 	jmp $fbdf	; jump to bell1 hijack
diff --git a/rom5x/B0_FBDF_bell1_hijack.s b/rom5x/B0_FBDF_bell1_hijack.s
index 2898a2b..853b4d7 100644
--- a/rom5x/B0_FBDF_bell1_hijack.s
+++ b/rom5x/B0_FBDF_bell1_hijack.s
@@ -1,3 +1,20 @@
+; Hijack the BELL1 monitor routine to do our bidding.
+; BELL1 implements the beep sound heard on reset or
+; Ctrl-G, etc.  It starts with
+; LDA #$40
+; JSR WAIT ; delay .1 sec
+; followed by code to actually beep the speaker
+; In our case, BELL1 always loads the accumulator with
+; a fixed number, and executes a 3-byte instruction
+; Well, it turns out that to switch banks we need
+; 3 bytes, and as luck would have it the other bank
+; is empty here.
+; So the routine on the other side is the ROM 5X
+; dispatcher. It will take what is in the accumulator
+; and use that to determine the next action.
+; Obviously, $40 should beep the speaker, anything
+; else can do whatever we want.
+
 .text
 * = $fbdf
 	sta $c028
diff --git a/rom5x/B1_C53D_patch_out_rom_cksum.s b/rom5x/B1_C53D_patch_out_rom_cksum.s
new file mode 100644
index 0000000..ed7be8c
--- /dev/null
+++ b/rom5x/B1_C53D_patch_out_rom_cksum.s
@@ -0,0 +1,13 @@
+; Patch the Apple IIc+ diagnostics to skip the ROM checksum test.
+; We should really examine the routine at $D249 in the aux firmware
+; to see if we can calculate a new checksum.
+; the $D249 routine copies a small routine into the zero page that
+; calculates the checksum.  It returns with carry set = error and
+; carry clear = OK.  So we just patch the JSR to always clear the
+; carry.  For now.
+* = $C53D
+.text
+	nop
+	nop
+	clc
+
diff --git a/rom5x/B1_D516_boot5x.s b/rom5x/B1_D516_boot5x.s
index 659b9e2..1f25091 100644
--- a/rom5x/B1_D516_boot5x.s
+++ b/rom5x/B1_D516_boot5x.s
@@ -1,8 +1,7 @@
 #include "iic+.defs"
 .text
-* = boot5x ; 234 bytes available, code assembles to 231 when 
-	   ; next line uncommented
-	jsr titl5x		; TODO "Apple IIc +"
+* = boot5x ; 234 bytes available, code assembles to 231
+	jsr titl5x		; "Apple IIc +"
 	jsr rdrecov		; try to recover ramdisk
 	lda power2 + rx_mslot	; get action saved by reset5x
 	beq boot4		; if zero, continue boot
diff --git a/rom5x/B1_D6CE_rom5x_misc.s b/rom5x/B1_D6CE_rom5x_misc.s
index d91ebd1..17f6ec1 100644
--- a/rom5x/B1_D6CE_rom5x_misc.s
+++ b/rom5x/B1_D6CE_rom5x_misc.s
@@ -1,11 +1,11 @@
 #include "iic+.defs"
 .text
 * = misc5x ; max 306 bytes
-	bra domenu
-	bra dobann
-	bra gtkey
-	bra confirm
-	bra ntitle
+	bra domenu		; Display menu
+	bra dobann		; Display banner (title + By MG)
+	bra gtkey		; get a key
+	bra confirm		; ask SURE?
+	bra ntitle		; display "Apple IIc +"
 dobann	jsr ntitle
 	ldx #(msg2-msg1)	; msg display entry point
 	jmp disp
@@ -50,10 +50,11 @@ confirm	pha
 	plp
 	rts
 ; display "Apple IIc +" in a convoluted manner
-; ultimately, the rts instruction here "rts" to swrts2
-; which switches banks and "rts" to the title/banner firmware call
-; which then "rts" to swrts (same addr as swrts2, but main bank)
-; which then actually rts to our caller
+; we push the address of swrts/swrts2 onto the stack
+; and then the address of the title routine
+; we then jump to swrts2 which switches banks and RTS to
+; display "Apple IIc +", which then RTS to swrts, which
+; switches banks back to here and RTS to our caller.
 ntitle	lda #>(swrts2-1)	; put return addr of swrts/swrts2 on stack
 	pha
 	lda #<(swrts2-1)
@@ -62,11 +63,6 @@ ntitle	lda #>(swrts2-1)	; put return addr of swrts/swrts2 on stack
 	pha
 	lda #<(banner-1)
 	pha
-	;lda #>(swrts2-1)	; put swrts on the stack
-	;pha
-	;lda #<(swrts2-1)
-	;pha
-	;rts			; jump to swrts2
 	jmp swrts2		; jump to swrts2
 ; msg format
 ; A byte < $20 indicates high byte of address.
diff --git a/rom5x/B1_FBE2_rom5x_dispatch.s b/rom5x/B1_FBE2_rom5x_dispatch.s
index 5bbb798..709dcaa 100644
--- a/rom5x/B1_FBE2_rom5x_dispatch.s
+++ b/rom5x/B1_FBE2_rom5x_dispatch.s
@@ -8,10 +8,10 @@ chk2:	cmp #$ea		; boot patch
 	bne dowait
 	jmp boot5x
 dowait:	jsr $fcb5		; do delay if anything else
-	lda #>($fbe2-1)
-	pha
-	lda #<($fbe2-1)
+	lda #>($fbe2-1)		; return to other bank here
+	pha			; by pushing address onto
+	lda #<($fbe2-1)		; the stack
 	pha
 	lda #$00		; in case someone assumes this
-	jmp swrts2
+	jmp swrts2		; back to other bank
 	; 28 bytes, will have to move if we get bigger
diff --git a/rom5x/Rakefile b/rom5x/Rakefile
index 7d47ae6..3898693 100644
--- a/rom5x/Rakefile
+++ b/rom5x/Rakefile
@@ -12,6 +12,7 @@ end
 desc "Clean object files"
 task :clean do
   sh "rm -f #{dest_rom}"
+  sh "rm -f sf512_#{dest_rom}"
   sh "rm -f *.o65"
   sh "rm -f *.o65.lbl"
 end