Apple2GSBuildPipeline/Makefile

186 lines
7.1 KiB
Makefile
Raw Normal View History

2017-05-17 02:34:15 +00:00
#
# Makefile
# Apple //GS Build Engine for ORCA and Merlin
2017-05-17 02:34:15 +00:00
#
include make/head.mk
# Customize this file to control what kind of project you are working on,
# where to find files, etc.
# The name of your system or binary file to build goes here:
PGM=___PACKAGENAME___
# Set the target type you would like to build. The options are:
# shell - A shell command for ORCA, GNO or other GS shell
# desktop - A full desktop application
# cda - A classic desk accessory
# cdev - A control panel device
# nba - A HyperStudio new button action
# nda - A new desk accessory
# xcmd - A HyperCard XCMD or XCFN
#
# TARGETTYPE=shell
2017-05-17 02:34:15 +00:00
# TARGETTYPE=desktop
# TARGETTYPE=cda
# TARGETTYPE=cdev
# TARGETTYPE=nba
# TARGETTYPE=nda
# TARGETTYPE=xcmd
# Uncomment one of the following lines to force a particular GS emulator.
# By default, specific paths are tested for these emulators in the below
# order and the first found is what will be used. You can overrride that
# here:
#
# EMULATOR=gsplus
# EMULATOR=mame
# EMULATOR=gsport
# By default, the build provides a single boot environment to test with.
# You can put other .2mg files into the make directory and override this
# variable to change what boot disk you want to use when you launch the
# emulator. The disk image you specify must be found in the make directory:
#
# BOOTIMAGE=system601.2mg
2017-05-17 02:34:15 +00:00
# Add any other directories where you are putting C or assembly source
# files to this list:
# SRCDIRS+=
# If you put your main entry point for your project in a file called main.c
# Then you don't need to change this value. If you want to call your entry
# point something other than main.c, set this variable to point to this file.
ROOTCFILE=main.c
# Add any arguments you want passed to the C compiler to this variable:
CFLAGS+=
# Add any arguments you want passed to the resource compiler to this variable:
REZFLAGS+=
# Uncomment the following line if you have installed rlint as found here:
# https://github.com/ksherlock/rlint/releases
# Assuming that it is in the path that ORCA searches (the Utilities directory is
# probably a good choice), you can just leave the value unchanged. If you have
# put the rlint somewhere weird, you can set this to the correct path
# RLINT_PATH=rlint
2017-05-17 02:34:15 +00:00
# Add any arguments you want passed to the macro generator to this variable:
MACGENFLAGS+=
# Add any other macro libraries to include in this variable:
MACGENMACROS+=
# Add any arguments you want passed to the assembler to this variable:
ASMFLAGS+=
# Add any arguments you want passed to the linker to this variable:
LDFLAGS+=
# Uncomment the following line if you want to build against the GNO libraries
# export ORCA=$(ORCA_BINDIR)/gno
# Add any markdown files to the MD_SRCS variable to specify which files to
# convert to a Teach text file format during the build. Using this, you can
# write your documentation in markdown in your project and at build time,
# that documentation is converted to a format that is good to package with
# your software and can be opened on a GS.
MD_SRCS=
# If you want to copy one or more files or directories to the distribution disk
# image, add the root directory to this variable. Any directories under
# the source directory which don't exist in the target disk image will be
# created. All files will be copied from the source to the target using
# the same path from the source.
#
# For example, if you set COPYDIRS to dir and in your project you have
# the following files:
# dir/Icons/myIconFile
# dir/newDir/anotherFile
# Then, during the copy phase, myIconFile will be copied into the Icons
# folder and a folder newDir will be created and anotherFile will be copied
# into there.
COPYDIRS=
# If you want to copy one or more files or directories to the boot disk
# image, add the root directory to this variable. Any directories under
# the source directory which don't exist in the boot disk image will be
# created. All files will be copied from the source to the target using
# the same path from the source.
#
# For example, if you set COPYBOOTDIRS to dir and in your project you have
# the following files:
# dir/System/mySystemFile
# dir/newDir/anotherFile
# Then, during the copy phase, mySystemFile will be copied into the System
# folder and a folder newDir will be created and anotherFile will be copied
# into there.
COPYBOOTDIRS=
# By default, the build expects that you have GSplus in the path:
# /Applications/GSplus.app/Contents/MacOS/gsplus
# If you have it in a different location, specify that here.
# GSPLUS=/Applications/GSplus.app/Contents/MacOS/gsplus
# By default, the build uses no arguments with GSplus. If you would like to
# use different arguments, specify that here.
# GSPLUSARGS=
# By default, the build expects that you have GSport in the path:
# /Applications/GSport/GSport.app/Contents/MacOS/GSport
# If you have it in a different location, specify that here.
# GSPORT=/Applications/GSport/GSport.app/Contents/MacOS/GSport
# By default, the build uses no arguments with GSport. If you would like to
# use different arguments, specify that here.
# GSPORTARGS=
# By default, the build expects that you have Ample/mame in the path:
# /Applications/Ample.app/Contents/MacOS/mame64
# If you have it in a different location, specify that here.
# MAME=/Applications/Ample.app/Contents/MacOS/mame64
# By default, the build expects that you have the mame ROMs/libs in the path:
# $(HOME)/Library/Application Support/Ample
# If you have it in a different location, specify that here.
# MAMELIB=$(HOME)/Library/Application Support/Ample
# By default, the build uses these arguments with mame:
# apple2gs -skip_gameinfo -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
# If you would like to use different arguments, specify that here.
2021-05-07 04:10:31 +00:00
# MAMEARGS=apple2gs -skip_gameinfo -speed 2 -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
# For a desktop application, it can operate in 640x200 or 320x200
# resolution. This setting is used to define which horizontal
# resolution you want to use for a desktop application. Other
# target types ignore this value.
# DESKTOP_RES_MODE=640
# For a desktop application, it can support opening and printing
# files based on paths sent to it by the message center. This
# option controls if that is or is not supported in the
# application (note: only the C desktop template supports message
# center today)
# MESSAGE_CENTER=0
2017-08-31 03:07:13 +00:00
# Add any rules you want to execute before any compiles or assembly
# commands are called here, if any. You can generate .c, .s or .h
# files for example. You can generate data files. Whatever you
# might need. You should generate these files in the $(GENDIR)
# directory or within a subdirectory under $(GENDIR) which you create
# yourself.
#
# All of your commands associated with a rule _must_ start with a tab
# character. Xcode makes it a bit tough to type a tab character by
# default. Press option-tab within Xcode to insert a tab character.
2017-08-31 03:07:13 +00:00
gen:
# For any files you generated in the gen target above, you should
# add rules in genclean to remove those generated files when you
# clean your build.
genclean:
2017-05-17 02:34:15 +00:00
# Do not change anything else below here...
include make/tail.mk