Add the ability to select the emulator to use. Add support for the mame emulator. Separate the boot image from the distribution disk image (although targets like NDAs also install into the boot disk). Add the tar shell command from Kelvin and use it when packaging to also create a shrinkit archive of the distribution.

This commit is contained in:
Jeremy Rand 2021-04-13 00:04:59 -04:00
parent b6527a190e
commit 7d3a33e34c
24 changed files with 698 additions and 46 deletions

1
.gitignore vendored
View File

@ -1 +1,2 @@
*.lst
.*.sw?

View File

@ -28,6 +28,22 @@ PGM=___PACKAGENAME___
# TARGETTYPE=nda
# TARGETTYPE=xcmd
# Uncomment one of the following lines to force a particular GS emulator.
# By default, specific paths are tested for these emulators in the below
# order and the first found is what will be used. You can overrride that
# here:
#
# EMULATOR=gsplus
# EMULATOR=mame
# EMULATOR=gsport
# By default, the build provides a single boot environment to test with.
# You can put other .2mg files into the make directory and override this
# variable to change what boot disk you want to use when you launch the
# emulator. The disk image you specify must be found in the make directory:
#
# BOOTIMAGE=system601.2mg
# Add any other directories where you are putting C or assembly source
# files to this list:
# SRCDIRS+=
@ -65,7 +81,7 @@ LDFLAGS+=
# Uncomment the following line if you want to build against the GNO libraries
# export ORCA=$(ORCA_BINDIR)/gno
# If you want to copy one or more files or directories to the target disk
# If you want to copy one or more files or directories to the distribution disk
# image, add the root directory to this variable. Any directories under
# the source directory which don't exist in the target disk image will be
# created. All files will be copied from the source to the target using
@ -73,23 +89,61 @@ LDFLAGS+=
#
# For example, if you set COPYDIRS to dir and in your project you have
# the following files:
# dir/Icons/myIconFile
# dir/newDir/anotherFile
# Then, during the copy phase, myIconFile will be copied into the Icons
# folder and a folder newDir will be created and anotherFile will be copied
# into there.
COPYDIRS=
# If you want to copy one or more files or directories to the boot disk
# image, add the root directory to this variable. Any directories under
# the source directory which don't exist in the boot disk image will be
# created. All files will be copied from the source to the target using
# the same path from the source.
#
# For example, if you set COPYBOOTDIRS to dir and in your project you have
# the following files:
# dir/System/mySystemFile
# dir/newDir/anotherFile
# Then, during the copy phase, mySystemFile will be copied into the System
# folder and a folder newDir will be created and anotherFile will be copied
# into there.
COPYDIRS=
COPYBOOTDIRS=
# By default, the build expects that you have GSplus in the path:
# /Applications/GSplus.app/Contents/MacOS/gsplus
# If you have it in a different location, specify that here.
# GSPLUS=/Applications/GSplus.app/Contents/MacOS/gsplus
# By default, the build uses no arguments with GSplus. If you would like to
# use different arguments, specify that here.
# GSPLUSARGS=
# By default, the build expects that you have GSport in the path:
# /Applications/GSport/GSport.app/Contents/MacOS/GSport
# If you have it in a different location, specify that here.
# GSPORT=/Applications/GSport/GSport.app/Contents/MacOS/GSport
# By default, the build uses no arguments with GSport. If you would like to
# use different arguments, specify that here.
# GSPORTARGS=
# By default, the build expects that you have Ample/mame in the path:
# /Applications/Ample.app/Contents/MacOS/mame64
# If you have it in a different location, specify that here.
# MAME=/Applications/Ample.app/Contents/MacOS/mame64
# By default, the build expects that you have the mame ROMs/libs in the path:
# $(HOME)/Library/Application Support/Ample
# If you have it in a different location, specify that here.
# MAMELIB=$(HOME)/Library/Application Support/Ample
# By default, the build uses these arguments with mame:
# apple2gs -skip_gameinfo -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
# If you would like to use different arguments, specify that here.
# MAMEARGS=apple2gs -skip_gameinfo -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
# For a desktop application, it can operate in 640x200 or 320x200
# resolution. This setting is used to define which horizontal
# resolution you want to use for a desktop application. Other

View File

@ -33,6 +33,22 @@ ASSEMBLER=merlin
# TARGETTYPE=nda
# TARGETTYPE=xcmd
# Uncomment one of the following lines to force a particular GS emulator.
# By default, specific paths are tested for these emulators in the below
# order and the first found is what will be used. You can overrride that
# here:
#
# EMULATOR=gsplus
# EMULATOR=mame
# EMULATOR=gsport
# By default, the build provides a single boot environment to test with.
# You can put other .2mg files into the make directory and override this
# variable to change what boot disk you want to use when you launch the
# emulator. The disk image you specify must be found in the make directory:
#
# BOOTIMAGE=system601.2mg
# Add any other directories where you are putting C or assembly source
# files to this list. Note that you must manually add all source files
# to the linkscript.s file. All this does is help the build system
@ -50,7 +66,7 @@ REZFLAGS+=
# put the rlint somewhere weird, you can set this to the correct path
# RLINT_PATH=rlint
# If you want to copy one or more files or directories to the target disk
# If you want to copy one or more files or directories to the distribution disk
# image, add the root directory to this variable. Any directories under
# the source directory which don't exist in the target disk image will be
# created. All files will be copied from the source to the target using
@ -58,23 +74,61 @@ REZFLAGS+=
#
# For example, if you set COPYDIRS to dir and in your project you have
# the following files:
# dir/Icons/myIconFile
# dir/newDir/anotherFile
# Then, during the copy phase, myIconFile will be copied into the Icons
# folder and a folder newDir will be created and anotherFile will be copied
# into there.
COPYDIRS=
# If you want to copy one or more files or directories to the boot disk
# image, add the root directory to this variable. Any directories under
# the source directory which don't exist in the boot disk image will be
# created. All files will be copied from the source to the target using
# the same path from the source.
#
# For example, if you set COPYBOOTDIRS to dir and in your project you have
# the following files:
# dir/System/mySystemFile
# dir/newDir/anotherFile
# Then, during the copy phase, mySystemFile will be copied into the System
# folder and a folder newDir will be created and anotherFile will be copied
# into there.
COPYDIRS=
COPYBOOTDIRS=
# By default, the build expects that you have GSplus in the path:
# /Applications/GSplus.app/Contents/MacOS/gsplus
# If you have it in a different location, specify that here.
# GSPLUS=/Applications/GSplus.app/Contents/MacOS/gsplus
# By default, the build uses no arguments with GSplus. If you would like to
# use different arguments, specify that here.
# GSPLUSARGS=
# By default, the build expects that you have GSport in the path:
# /Applications/GSport/GSport.app/Contents/MacOS/GSport
# If you have it in a different location, specify that here.
# GSPORT=/Applications/GSport/GSport.app/Contents/MacOS/GSport
# By default, the build uses no arguments with GSport. If you would like to
# use different arguments, specify that here.
# GSPORTARGS=
# By default, the build expects that you have Ample/mame in the path:
# /Applications/Ample.app/Contents/MacOS/mame64
# If you have it in a different location, specify that here.
# MAME=/Applications/Ample.app/Contents/MacOS/mame64
# By default, the build expects that you have the mame ROMs/libs in the path:
# $(HOME)/Library/Application Support/Ample
# If you have it in a different location, specify that here.
# MAMELIB=$(HOME)/Library/Application Support/Ample
# By default, the build uses these arguments with mame:
# apple2gs -skip_gameinfo -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
# If you would like to use different arguments, specify that here.
# MAMEARGS=apple2gs -skip_gameinfo -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
# For a desktop application, it can operate in 640x200 or 320x200
# resolution. This setting is used to define which horizontal
# resolution you want to use for a desktop application. Other

View File

@ -6,7 +6,7 @@ s5d2 =
s6d1 =
s6d2 =
s7d1 = ../___PACKAGENAME___.2mg
s7d1 =
g_joystick_type = 0
g_limit_speed = 0

View File

@ -1,27 +1,31 @@
#!/bin/sh
MOUNTDIR=/tmp/a2gs_mount.$$
TMPDISKIMAGE=/tmp/a2gs_diskimage_$$.2mg
TEMPLATEDISKIMAGE=make/system601.2mg
if [ $# -lt 3 ]
then
echo USAGE: $0 diskimage file directory
echo USAGE: $0 diskimage bootimage file [bootdest]
exit 1
fi
DISKIMAGE="$1"
shift
DESTBOOTIMAGE="$1"
shift
FILE="$1"
shift
DISKIMAGEDEST="$1"
shift
DEST="${MOUNTDIR}/${DISKIMAGEDEST}"
BOOTCOPYPATH="$1"
COPYDIRS=$*
PROGRAM=`basename "$FILE"`
TMPDIR=/tmp/a2gs_mount.$$
MOUNTDIR="${TMPDIR}/$PROGRAM"
TMPDISKIMAGE=/tmp/a2gs_diskimage_$$.2mg
TMPBOOTIMAGE=/tmp/a2gs_bootimage_$$.2mg
TMPARCHIVE=/tmp/s2gs_archive_$$.shk
TEMPLATEDISKIMAGE="make/empty.2mg"
TEMPLATEBOOTIMAGE="make/$BOOTIMAGE"
ARCHIVE=`dirname "$DISKIMAGE"`/"${PROGRAM}.shk"
# It looks like on Linux, the cp command needs a special argument to preserve the resource fork. This isn't ideal
# but for now, if uname is Darwin, then this is MacOS and we don't need any cp args. If not Darwin, then assume
@ -41,8 +45,11 @@ cleanupAndExit()
{
umount "$MOUNTDIR" 2> /dev/null
rm -f "$TMPDISKIMAGE" 2> /dev/null
rm -f "$TMPBOOTIMAGE" 2> /dev/null
rm -f "$TMPARCHIVE" 2> /dev/null
rm -f "$DISKIMAGE" 2> /dev/null
rmdir "$MOUNTDIR" 2> /dev/null
rm -f "$DESTBOOTIMAGE" 2> /dev/null
rm -rf "$TMPDIR" 2> /dev/null
exit 1
}
@ -52,10 +59,16 @@ then
cleanupAndExit
fi
cp "$TEMPLATEDISKIMAGE" "$TMPDISKIMAGE"
if [ ! -f "$TEMPLATEBOOTIMAGE" ]
then
echo Unable to find the template boot image, $TEMPLATEBOOTIMAGE
cleanupAndExit
fi
mkdir "$TMPDIR"
if [ $? != 0 ]
then
echo Unable to copy template disk image.
echo Unable to create the mount directory.
cleanupAndExit
fi
@ -66,6 +79,81 @@ then
cleanupAndExit
fi
cp "$TEMPLATEBOOTIMAGE" "$TMPBOOTIMAGE"
if [ $? != 0 ]
then
echo Unable to copy template boot image.
cleanupAndExit
fi
if [ ! -z "$COPYBOOTDIRS" ] || [ ! -z "BOOTCOPYPATH" ]
then
profuse -orw "$TMPBOOTIMAGE" "$MOUNTDIR"
if [ $? != 0 ]
then
echo Unable to mount the boot image.
cleanupAndExit
fi
if [ ! -z "$BOOTCOPYPATH" ]
then
cp $CPARGS "$FILE" "$MOUNTDIR/$BOOTCOPYPATH"
if [ $? != 0 ]
then
echo Unable to copy the file to the boot image.
cleanupAndExit
fi
fi
OLDDIR=`pwd`
for COPYDIR in $COPYBOOTDIRS
do
cd "$COPYDIR"
if [ $? != 0 ]
then
echo Unable to find $COPYDIR
cleanupAndExit
fi
find . -print | while read FILEORDIR
do
if [ -d "$FILEORDIR" ]
then
mkdir -p "${MOUNTDIR}/$FILEORDIR"
elif [ -f "$FILEORDIR" ]
then
cp $CPARGS "$FILEORDIR" "${MOUNTDIR}/$FILEORDIR"
fi
done
cd "$OLDDIR"
done
RETRIES=0
while [ $RETRIES -lt 5 ]
do
umount "$MOUNTDIR"
if [ $? -eq 0 ]
then
break
fi
RETRIES=`expr $RETRIES + 1`
sleep 1
done
if [ $RETRIES -ge 5 ]
then
echo Unable to unmount the boot image.
cleanupAndExit
fi
fi
cp "$TEMPLATEDISKIMAGE" "$TMPDISKIMAGE"
if [ $? != 0 ]
then
echo Unable to copy template disk image.
cleanupAndExit
fi
profuse -orw "$TMPDISKIMAGE" "$MOUNTDIR"
if [ $? != 0 ]
then
@ -73,7 +161,7 @@ then
cleanupAndExit
fi
cp $CPARGS "$FILE" "$DEST"
cp $CPARGS "$FILE" "$MOUNTDIR"
if [ $? != 0 ]
then
echo Unable to copy the file to the disk image.
@ -103,6 +191,15 @@ do
cd "$OLDDIR"
done
cd "$TMPDIR"
$ORCA "$OLDDIR/make/tar" cf "$TMPARCHIVE" "$PROGRAM"
if [ $? != 0 ]
then
echo Unable to create archive.
cleanupAndExit
fi
cd "$OLDDIR"
RETRIES=0
while [ $RETRIES -lt 5 ]
do
@ -129,6 +226,22 @@ then
cleanupAndExit
fi
cp "$TMPBOOTIMAGE" "$DESTBOOTIMAGE"
if [ $? != 0 ]
then
echo Unable to copy the boot image to the destination.
cleanupAndExit
fi
cp "$TMPARCHIVE" "$ARCHIVE"
if [ $? != 0 ]
then
echo Unable to copy the archive to the destination.
cleanupAndExit
fi
rm -f "$TMPDISKIMAGE"
rmdir "$MOUNTDIR"
rm -f "$TMPBOOTIMAGE"
rm -f "$TMPARCHIVE"
rm -rf "$TMPDIR"
exit 0

BIN
make/empty.2mg Normal file

Binary file not shown.

View File

@ -72,10 +72,40 @@ DESKTOP_RES_MODE=640
MESSAGE_CENTER=0
GSPLUS=/Applications/GSplus.app/Contents/MacOS/gsplus
GSPLUSARGS=
GSPORT=/Applications/GSport/GSport.app/Contents/MacOS/GSport
GSPORTARGS=
MAME=/Applications/Ample.app/Contents/MacOS/mame64
MAMELIB=$(HOME)/Library/Application Support/Ample
MAMEARGS=apple2gs -skip_gameinfo -mouse -window -resolution 1408x1056 -ramsize 4M -sl7 cffa202
export GSPLUS
export GSPLUSARGS
export GSPORT
export GSPORTARGS
export MAME
export MAMELIB
export MAMEARGS
ifneq (,$(wildcard $GSPLUS))
EMULATOR=gsplus
else ifneq (,$(wildcard $MAME))
EMULATOR=mame
else ifneq (,$(wildcard $GSPORT))
EMULATOR=gsport
else
EMULATOR=gsplus
endif
export EMULATOR
BOOTIMAGE=system601.2mg
export BOOTIMAGE
COPYDIRS=
export COPYDIRS
COPYBOOTDIRS=
export COPYBOOTDIRS
XCODE_PATH=/Applications/Xcode.app
XCODE_INFO=$(XCODE_PATH)/Contents/Info.plist

View File

@ -1,18 +1,29 @@
#!/bin/sh
if [ ! -z "$GSPLUS" ] && [ -x "$GSPLUS" ]
then
EMULATORPATH="$GSPLUS"
elif [ ! -z "$GSPORT" ] && [ -x "$GSPORT" ]
then
EMULATORPATH="$GSPORT"
fi
TMPDIR="/tmp/a2gs_emulator.$$"
if [ -z "$EMULATORPATH" ]
cleanupAndExit()
{
cd
if [ ! -z $PID ]
then
kill $PID 2> /dev/null
fi
rm -rf $TMPDIR
exit 0
}
createConfigTxt()
{
mkdir "$TMPDIR"
sed "s:^s7d1 *=.*$:s7d1 = $BOOTIMAGE:
s:^s5d1 *=.*:s5d1 = $DISKIMAGE:" < make/config.txt > "$TMPDIR/config.txt"
}
if [ $# -ne 2 ]
then
echo Unable to find GSplus or GSport at these locations.
echo " GSPLUS=$GSPLUS"
echo " GSPORT=$GSPORT"
echo USAGE $0: diskimage bootimage
exit 1
fi
@ -22,15 +33,52 @@ then
DISKIMAGE="$PWD/$DISKIMAGE"
fi
cd make
sed -i "" "s:^s7d1 *=.*$:s7d1 = $DISKIMAGE:" config.txt
BOOTIMAGE="$2"
if echo $BOOTIMAGE | grep -v '^/' > /dev/null
then
BOOTIMAGE="$PWD/$BOOTIMAGE"
fi
case "$EMULATOR" in
gsplus)
EMULATORPATH="$GSPLUS"
EMULATORARGS="$GSPLUSARGS"
EMULATORDIR="$TMPDIR"
createConfigTxt
;;
gsport)
EMULATORPATH="$GSPORT"
EMULATORARGS="$GSPORTARGS"
EMULATORDIR="$TMPDIR"
createConfigTxt
;;
mame)
EMULATORPATH="$MAME"
EMULATORARGS="$MAMEARGS -hard1 "$BOOTIMAGE" -flop3 "$DISKIMAGE""
EMULATORDIR="$MAMELIB"
;;
*)
echo Invalid emulator specified, \"$EMULATOR\"
exit 1
;;
esac
if [ ! -x "$EMULATORPATH" ]
then
echo Unable to find $EMULATOR at $EMULATORPATH
exit 1
fi
if [ ! -d "$EMULATORDIR" ]
then
echo Unable to find $EMULATOR library at $EMULATORDIR
exit 1
fi
cd "$EMULATORDIR"
# This magic ensure that clicking stop in Xcode results in the emulator terminating.
$EMULATORPATH &
"$EMULATORPATH" $EMULATORARGS &
PID=$!
trap 'kill $PID' SIGTERM SIGINT SIGHUP EXIT
trap cleanupAndExit SIGTERM SIGINT SIGHUP EXIT
wait
exit 0

Binary file not shown.

View File

@ -7,9 +7,11 @@ export PATH := $(PATH):$(ORCA_BIN)
CWD=$(shell pwd)
DISKIMAGE=$(TARGETDIR)/$(PGM).2mg
ARCHIVE=$(TARGETDIR)/$(PGM).shk
DESTBOOTIMAGE=$(TARGETDIR)/$(BOOTIMAGE)
BUILDTARGET=$(DISKIMAGE)
EXECTARGET=executeGUI
DISKIMAGEDEST=.
BOOTCOPYPATH=
AUXTYPE=
CFLAGS+=-i$(GENDIR)
@ -31,18 +33,18 @@ else ifeq ($(TARGETTYPE),desktop)
REZFLAGS+=rez='-d MESSAGE_CENTER=$(MESSAGE_CENTER)'
else ifeq ($(TARGETTYPE),cda)
FILETYPE=cda
DISKIMAGEDEST=System/Desk.Accs
BOOTCOPYPATH=System/Desk.Accs
else ifeq ($(TARGETTYPE),cdev)
BINTARGET=$(TARGETDIR)/$(PGM).bin
FILETYPE=199
DISKIMAGEDEST=System/CDevs
BOOTCOPYPATH=System/CDevs
REZFLAGS+=rez='-d BINTARGET="$(BINTARGET)"'
else ifeq ($(TARGETTYPE),nba)
FILETYPE=exe
BUILDTARGET=$(TARGETDIR)/$(PGM)
else ifeq ($(TARGETTYPE),nda)
FILETYPE=nda
DISKIMAGEDEST=System/Desk.Accs
BOOTCOPYPATH=System/Desk.Accs
else ifeq ($(TARGETTYPE),xcmd)
FILETYPE=exe
BUILDTARGET=$(TARGETDIR)/$(PGM)
@ -105,6 +107,8 @@ clean: genclean
$(RM) $(ALL_DEPS)
$(RM) $(ASM_MACROS)
$(RM) "$(DISKIMAGE)"
$(RM) "$(DESTBOOTIMAGE)"
$(RM) "$(ARCHIVE)"
createPackage:
pkg/createPackage
@ -178,13 +182,13 @@ $(TARGETDIR)/$(PGM): $(REZ_OBJS)
endif
$(DISKIMAGE): $(TARGETDIR)/$(PGM)
make/createDiskImage "$(DISKIMAGE)" "$(TARGETDIR)/$(PGM)" "$(DISKIMAGEDEST)" $(COPYDIRS)
$(DISKIMAGE): $(TARGETDIR)/$(PGM) make/empty.2mg make/$(BOOTIMAGE)
make/createDiskImage "$(DISKIMAGE)" $(DESTBOOTIMAGE) "$(TARGETDIR)/$(PGM)" $(BOOTCOPYPATH)
execute: $(EXECTARGET)
executeGUI: all
make/launchEmulator "$(DISKIMAGE)"
make/launchEmulator "$(DISKIMAGE)" "$(DESTBOOTIMAGE)"
executeShell: all
$(ORCA) $(TARGETDIR)/$(PGM)

BIN
make/tar Normal file

Binary file not shown.

View File

@ -14,6 +14,8 @@
<string>make/merlin-asm</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -78,6 +80,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -173,6 +189,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -61,7 +61,7 @@
isEnabled = "YES">
</CommandLineArgument>
<CommandLineArgument
argument = "&quot;$PROJECT_DIR/___PACKAGENAME___&quot;""
argument = "&quot;$PROJECT_DIR/___PACKAGENAME___&quot;"
isEnabled = "YES">
</CommandLineArgument>
<CommandLineArgument

View File

@ -15,6 +15,8 @@
<string>make/merlin-asm</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -84,6 +86,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -179,6 +195,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -15,6 +15,8 @@
<string>make/merlin-asm</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -84,6 +86,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -197,6 +213,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -15,6 +15,8 @@
<string>make/merlin-asm</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -84,6 +86,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -179,6 +195,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -14,6 +14,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -80,6 +82,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -175,6 +191,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -16,6 +16,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -92,6 +94,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -187,6 +203,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -16,6 +16,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -92,6 +94,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -217,6 +233,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -16,6 +16,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -92,6 +94,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -187,6 +203,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -14,6 +14,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -80,6 +82,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -175,6 +191,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -15,6 +15,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -86,6 +88,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -181,6 +197,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -15,6 +15,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -86,6 +88,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -199,6 +215,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>

View File

@ -15,6 +15,8 @@
<string>make/orca-cc</string>
<string>make/orca-rez</string>
<string>make/system601.2mg</string>
<string>make/empty.2mg</string>
<string>make/tar</string>
<string>make/tail.mk</string>
<string>../___PACKAGENAME___.xcodeproj/xcshareddata/xcschemes/___PACKAGENAME___.xcscheme</string>
</array>
@ -86,6 +88,20 @@
<key>Path</key>
<string>make/system601.2mg</string>
</dict>
<key>make/empty.2mg</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/empty.2mg</string>
</dict>
<key>make/tar</key>
<dict>
<key>Group</key>
<string>make</string>
<key>Path</key>
<string>make/tar</string>
</dict>
<key>make/tail.mk</key>
<dict>
<key>Group</key>
@ -181,6 +197,19 @@
<string>___PACKAGENAME___.2mg</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>
<key>TargetIdentifier</key>
<string>com.apple.dt.commandLineToolTarget</string>
<key>Name</key>
<string>Archive</string>
<key>SharedSettings</key>
<dict>
<key>PRODUCT_NAME</key>
<string>___PACKAGENAME___.shk</string>
</dict>
</dict>
<dict>
<key>ProductType</key>
<string>com.apple.product-type.tool</string>