961625721b
U2: Improve comment ( #1100 )
2022-05-20 08:04:49 +01:00
60cbbb40db
Uthernet II: 2 fixes and minor changes (PR #1100 )
...
* Enable virtual DNS by default.
* Improve handling of header size:
This fixes an issue in UDP, where it would not take the header size into account when deciding how much to read.
* IPRAW socket. Fix an issue where the header would include "our" IP Address.
The doc is not very clear 5.2.3: they say "destination". But for consistency with UDP (5.2.2) where it seems clear that this is the peer's ip, we replace with the "destination" of the socket, or the "source" of the packet.
* minor tweak: signal with SOCK_SYNSENT that a connection is being established.
* remove Socket::myErrno as it serves no purpose.
It is a duplicate of (sn_sr == W5100_SN_SR_SOCK_SYNSENT).
* add some logging when reading/writing on a closed socket.
2022-05-19 19:30:34 +01:00
6a5ea92a4e
Uthernet II: add virtual DNS feature (PR #1097 )
...
Uthernet II: add extended feature to virtualise DNS requests.
. This allows pure TCP/UDP sockets to run *without* MACRAW requests (and so without libpcap).
. Raw sockets will not work.
. Add configuration for Virtual DNS.
libpcap: ensure all functions check if the library is loaded before using it.
Uthernet 1: do NOT overwrite tfe_cannot_use as it should only reflect the availability of npcap on *this* system.
Add Copyright notice, and mention Virtual DNS in html.
2022-05-08 16:26:01 +01:00
ccb4582bf9
Debugger: fixed warning (and a typo)
2022-05-01 15:15:09 +01:00
4063611e71
Debugger: replace sprintf() part 7 final - Debug (PR #1093 )
...
- Add ProfileLine_t to take care of the profile line buffer
- Simplify _SearchMemoryDisplay() without using StringCat()
- Simplify CmdOutputPrint() significantly
2022-05-01 15:01:33 +01:00
47ba87a015
Debugger: replace sprintf() part 6 - Debugger_Disassembler (PR #1092 )
...
- Improve FormatCharCopy() to not buffer overflow
- Improve FormatOpcodeBytes() to not buffer overflow
- Improve FormatNopcodeBytes() to not buffer overflow
- Change FormatDisassemblyLine() to return std::string
2022-05-01 14:24:35 +01:00
b9308b36ea
Debugger: replace sprintf() part 5 - Debugger_DisassemblerData (PR #1091 )
...
- Change _GetAutoSymbolName() to return std::string
2022-05-01 14:08:45 +01:00
0ab10905e4
Fix a couple of warnings from PR#1090 (PR #1094 )
...
* Fix a couple of warnings from PR#1090
* Fix as suggested and further improvement
2022-04-30 10:53:14 +01:00
a5c41dd8ca
Uthernet: check pcap_dispatch() for -ve (error) result too ( #1095 )
2022-04-29 21:03:25 +01:00
93ea5b3e60
WOZ: Improve reading write-protect ( #1078 ) and remove 'm_resetSequencer' var
2022-04-23 18:13:15 +01:00
777d5f6807
Merge pull request #1090 from kiyolee/replace-sprintf-part-4
...
Debugger: replace sprintf() part 4 - Debugger_Display
2022-04-22 08:51:14 -07:00
d4476ac4e7
Merge pull request #1089 from kiyolee/replace-sprintf-part-3
...
Debugger: replace sprintf() part 3 - Debugger_Symbols
2022-04-22 08:50:39 -07:00
d0360937c1
Fix per review
2022-04-21 00:40:46 +10:00
d490b794e9
Fix per review
2022-04-21 00:21:30 +10:00
cb37dd300b
WOZ: Fix for reading write-protect from data register ( #1078 )
2022-04-18 21:13:41 +01:00
6a342c27ce
Debugger: replace sprintf() part 4 - Debugger_Display
...
- Change ColorizeSpecialChar() to return std::string
2022-04-18 08:46:33 +10:00
d83dae3b29
Debugger: replace sprintf() part 3 - Debugger_Symbols
...
- Change _CmdSymbolsInfoHeader() to return std::string
2022-04-18 08:46:15 +10:00
08c730c647
Cmd line: add -wav-speaker <file> & -wav-mockingboard <file>
2022-04-17 16:23:51 +01:00
494aaa04c0
Debugger: replace sprintf() part 2 (PR #1085 )
2022-04-17 11:40:21 +01:00
a5e8ee31a3
Debugger: Improve some for-loops definitions (PR #1084 )
2022-04-17 11:32:03 +01:00
f948a9491a
Debugger: Remove unnecessary alias pointer (PR #1083 )
2022-04-06 20:37:24 +01:00
6e003fd49f
Debugger: replace prefix 'str' with 's' (PR #1082 )
2022-04-06 20:36:24 +01:00
5b50d784d7
Fix for previous commit 05a17d9 - pass a c-string
2022-04-03 19:31:42 +01:00
05a17d9a69
DiskII: fix build error when LOG_DISK_ENABLED = 1
2022-04-03 19:02:59 +01:00
e97be1b836
Debugger: fix console output for 'disk info' cmd
...
. fix to ConsoleBufferPush() which was skipping a char when the line needed to output to a 2nd line
2022-04-03 18:49:36 +01:00
1bcf371309
Debugger: Format changes only (PR #1076 )
2022-04-03 18:15:22 +01:00
01b9061482
Debugger: Rename 'pszCategory' to 'pCategory' (PR #1057 )
2022-03-29 19:53:51 +01:00
0f9e64b298
Debugger: Format changes only - consistent space after keywords (PR: #1072 )
2022-03-27 20:48:26 +01:00
0f7e240841
Debugger: Fix to use logical "&&" for boolean variables (PR #1073 )
2022-03-27 20:44:50 +01:00
eac88a340d
Fix spelling: "seperator" -> "separator" (PR #1071 )
2022-03-25 20:11:33 +00:00
500c2e50b6
Uthernet II: handle TCP connection failure. (PR #1070 )
2022-03-22 19:39:49 +00:00
cdd360bdfe
Uthernet II: implement IPRAW sockets. (PR #1069 )
2022-03-22 19:30:42 +00:00
2d4f60452f
Add ByteToHexStr() and WordToHexStr() (PR #1064 )
...
- Simplify common StrFormat(), especially in Debugger (changes upcoming)
- Add helpers StrAppendByteAsHex() and StrAppendWordAsHex()
- Add helpers StrBufferAppendByteAsHex() and StrBufferAppendWordAsHex() for plain string buffer
2022-03-22 19:19:50 +00:00
b4b29e1ef5
Refactor ParallelPrinter.cpp/h as a C++ class (PR #1067 )
...
Add command line: -s1 parallel.
NB. Only a single Parallel Printer card is supported, and currently it's restricted to slot 1.
2022-03-18 22:04:34 +00:00
cbc0c2cf87
Save-state: wrap string in quotes when it contains comment char '#'. Fixes #1066
2022-03-17 20:14:52 +00:00
a4341aa808
tfesupp: remove all manual string manipulations - just use std::string. (PR #1065 )
2022-03-14 21:12:52 +00:00
00668c2668
Debugger "help <cmd>" : fix formatting.
...
And specifically for "help brk" - split help across an extra line for better readability
2022-03-14 20:50:21 +00:00
169f0b29e8
Slot 3: make the default (ie. vanilla install of AppleWin) have an empty slot 3.
...
. Previously it would default to Uthernet, but there are now other slot 3 card options.
2022-03-13 17:19:21 +00:00
e38e48e3a6
Debugger: replace sprintf() part 1 (PR #1060 )
...
- Add MemoryTextFile_t::PushLineFormat()
- Replace some sprintf() with PushLineFormat()
2022-03-13 16:37:25 +00:00
35ec3fcc7f
Fix crash when in Config GUI -> Disk:
...
. eg. add DiskII in slot-5, cancel, then access $C0Dx
Change IsCardInSlot() to use CardMgr().QuerySlot()
2022-03-13 16:12:01 +00:00
231e6c6d64
Cards: remove special call to InitializeIO() for Disk and Harddisk. (PR #1061 )
2022-03-13 15:45:43 +00:00
be846efc83
Use clear() instread of erase(begin(), end()). (PR #1053 )
2022-03-12 11:19:34 +00:00
51149083e6
Add log msg for power-cycle, and improve debug-check for U1 $Csnn I/O access.
2022-03-12 10:16:38 +00:00
12d1a0e1fe
Card: cleanup interface. (PR #1059 )
...
1) Remove Init()
2) Call Reset() via CardManager
3) Call Destroy() via CardManager (only used by Disks/Harddisk) on WM_DESTROY
The only "real" changes are in CSuperSerialCard: ensure destructor cleans up and remove Destroy().
2022-03-11 22:17:03 +00:00
bbe2a7f8ee
Uthernet II card: support save/load state. (PR #1054 )
...
NB. do not attempt to restore a UDP / TCP socket.
2022-03-07 21:08:31 +00:00
648f832647
Debugger: minor stop-reason refactor
2022-03-02 21:25:04 +00:00
dfb8802763
Replace sprintf() with StrFormat() (PR #1048 )
2022-03-02 21:10:41 +00:00
80f3eaeb91
Various *Name() functions can simply return const std::string& (PR #1049 )
2022-02-28 20:52:18 +00:00
d2004553f1
Remove old tfe.cpp
2022-02-27 18:06:15 +00:00
9f8c4d99af
Add Uthernet II support and make Uthernet I a Card. (PR #1047 )
...
. tfe.cpp renamed to Uthernet1.cpp.
. add class NetworkBackend: common to both U1 and U2 cards, and abstracts Windows/Linux backends.
. modernise error message if WPCAP.DLL is not installed.
2022-02-27 17:26:48 +00:00
514d2adb79
6522: Fix IFR.T2 when counter.b15=1
2022-02-26 21:10:42 +00:00
c277c5152d
Fix a few medium Coverity defects:
...
1514566, 1063811
2022-02-26 20:23:00 +00:00
707993b686
Fix LogOutput() to call StrFormatV()
2022-02-26 18:39:39 +00:00
253a59fde6
Replace sprintf_s() and wsprintf() with StrFormat(). (PR #1041 )
...
And these Debugger related:
. Improve FormatAddress() and GetSymbol().
. GetSymbol(), FindSymbolFromAddress(), FormatAddress() are changed to use std::string instead.
. Remove static variable (not nice) in FormatAddress().
. GetSymbol() returns std::string reference instead of pointer.
2022-02-26 17:54:06 +00:00
9ad6b11cf9
Fix some format errors. (PR #1042 )
2022-02-26 17:15:09 +00:00
5a5d0e2df4
Debugger: Simplify console print (PR #1038 )
...
. Simplify console display functions using StrFormat()
. Update TestDebugger that needs StrFormat() now
2022-02-17 22:12:04 +00:00
43b9df253a
Fix build errors from PR #1039
2022-02-16 20:14:40 +00:00
7ae8907674
Remove unnecessary static std::string variables (PR #1039 )
2022-02-16 20:09:10 +00:00
8cb3d4c88c
Make DiskGetFullPathName() public. (PR #1035 )
...
Reasons:
. a macOS port needs it for the disk image browser feature.
. for consistency with "class HarddiskInterfaceCard".
2022-02-15 19:02:03 +00:00
1a4e933778
Replace StringCbPrintf() with StrFormat() (PR #1032 )
2022-02-15 18:48:20 +00:00
48dd638d33
Synchronize Linux build. (PR #1037 )
...
. remove OutputDebugStringA()
. push changes to StdAfx.h
. mention g_strSaveStatePathname in the error message for loading save-state
2022-02-14 20:37:18 +00:00
9a3832084a
Simplify the common combination of sprintf() and OutputDebugString() (PR #1031 )
...
- Update LogOutput() and LogFileOutput().
- Add StrFormat() to produce std::string out of snprintf() & add StrFormat.cpp to projects.
- Add PTRDIFF_T_FMT in parallel to SIZE_T_FMT to StdAfx.h, for completeness.
- In Log.cpp, changed to get timestamp using posix functions.
- Removed TCHAR usage throughout - simply use char.
2022-02-13 21:37:05 +00:00
83e56924f7
WM_CREATE: remove CpuCreateCriticalSection(), since done in SY6522.Reset()
2022-02-13 12:37:33 +00:00
b519031de4
WM_CREATE: call CpuCreateCriticalSection() instead of CpuInitialize()
2022-02-12 19:11:34 +00:00
3fe06faf65
MB/6522: remove the legacy g_nMBTimerDevice variable.
...
Fix ASSERT from previous commit as SY6522.Reset() needs CriticalSection.
2022-02-12 18:42:58 +00:00
8bbb85b1e8
SY6522: initialise device. (PR #1036 )
2022-02-12 17:29:49 +00:00
9459ec261a
Writes to Printer Interface card strobe should not be interpreted as a data byte ( #1017 PR #1027 )
2022-02-11 20:57:09 +00:00
ad73f3ec37
A couple of smallish fixes (PR #1029 )
...
. Fix VS2008 build: int8_t is not defined
. Fix VC compile warning C4800: forcing int to bool
2022-02-05 22:02:26 +00:00
f7c6ef397c
Split 6522 out of MB code and into own class (PR #1028 )
...
NB. Update CpuInitialize() & CriticalSection creation:
. call CpuInitialize() on WM_CREATE to create CriticalSection
. needed as MB_Initialize() needs CriticalSection
2022-02-05 18:48:36 +00:00
53ab72ce13
Card.cpp: add newline at EOF
2022-01-30 21:37:40 +00:00
7ab65492c6
Load save-state for Cards: improve error messages. ( #1025 )
...
. better error message for (unlikely) slot mismatch.
. better error message if load state version is invalid.
2022-01-30 21:25:40 +00:00
24378313c3
WOZ-related changes:
...
. Significant bit-cells after a gap between latch access upped from 50 to 100 (#1020 )
. Minor track sync mod: Update bitStream position for current track before re-calc'ing position for new track (#1022 )
. Minor: for DiskII I/O regs $A/B (Select Drive 1/2) update the isWOZ variable to reflect new image-type
2022-01-29 21:27:03 +00:00
af814347f0
Support AN3 for IIe ( #1018 )
...
(Fix IOUDIS for IIc - $C07E/F was backwards)
2022-01-15 18:01:41 +00:00
5fbd8339c1
Screenshot: reset file pointer to the end. (PR #1016 )
2022-01-07 21:06:24 +00:00
aa4af5e9d5
Debugger: Fix DF E937 not checking for 0.0 correctly
2022-01-06 10:26:30 -08:00
65e4859b01
Debugger: Cleanup DB DB2 DB4 DB8 DW DW2 DW4 DF DS
2022-01-06 10:18:38 -08:00
ae214a1b19
Debugger: Cleanup: Add note about magic number 200
2022-01-06 10:12:37 -08:00
8667c0eb32
Debugger: Cleanup: Add note about DISASM ID
2022-01-06 10:10:59 -08:00
182e48e82d
Debugger: Add: First pass of DF
2022-01-06 10:10:09 -08:00
32ee96fb8b
Debugger: Cleanup FormatNopcodeBytes()
2022-01-06 08:24:55 -08:00
7c4855e631
Debugger: Cleanup DISASM_DISPLAY_ enums
2022-01-05 15:42:34 -08:00
ca1bea3b97
Debugger: Add comment about DISK command
2022-01-05 15:41:47 -08:00
545c79f132
Debugger: Cleanup: Nopcode_e
2022-01-05 08:55:17 -08:00
7853c1cfcc
Debugger: Cleanup
2022-01-05 08:54:54 -08:00
8d864c2ab6
Cleanup: getVideoScannerAddressTXT() and getVideoScannerAddressHGR() to make it easier to debug
2022-01-04 23:37:38 -08:00
98a4481c7d
Debugger: 2.9.1.13 Added: CD now detects .. to change to the previous directory and chops the trailing sub-directory from the current path.
2022-01-04 23:37:06 -08:00
e91c5c0494
Merged
2022-01-04 21:41:08 -08:00
2a5e156f5e
Debugger: 2.9.1.12 Added: New commands HGR0, HGR3, HGR4, HGR5 to see pages /usr/bin/bash0, 0, 0, respectively.
2022-01-04 21:40:23 -08:00
e14339e282
Registry: fix support for legacy 'Harddisk Enable' key ( #1015 )
2022-01-04 20:19:21 +00:00
1613671c11
Debugger: Add note for 2.9.1.11
2022-01-04 11:29:18 -08:00
5e70f7949c
Debugger: 2.9.1.11 Fixed: Right justify signed decimal values.
2022-01-04 11:21:42 -08:00
f3c0e151ab
Debugger: 2.9.1.10 Fixed: Immedate #80 was not showing -128 for the signed decimal value.
2022-01-04 11:20:54 -08:00
6b11e24a28
Debugger: 2.9.1.9 Fixed: Immediate #0 was showing '#' prefix but not showing zero for the signed decimal value. Changed to show the signed decimal value only if non zero.
2022-01-04 11:20:08 -08:00
61d6ef58ee
Debugger: Cleanup old cruft
2022-01-04 11:17:14 -08:00
18b4581099
Debugger: 2.9.1.8 Changed: Disassembly window now lists symbol labels and symbol target address from User2 in orange.
2022-01-04 09:28:33 -08:00
17686df3df
Debugger: 2.9.1.7 Added: Extended SYM command to auto-generate symbol names when reverse engineering. NOTE: These symbols will be placed in User2.
2022-01-04 09:27:10 -08:00
1f5ca5d7e7
Bugfix: Is user requested which symbol table but symbol not found, mark as not in any
2022-01-04 09:24:52 -08:00
ba9388d1d8
Debugger: 2.9.1.6 Added: Branch instructions now show target address
2022-01-03 22:48:12 -08:00
b3dc408195
Debugger: Cleanup
2022-01-03 22:47:25 -08:00
65ab105d76
Debugger: 2.9.1.5 Added: Disassembly window now shows signed decimal values for immediate values.
2022-01-03 22:18:12 -08:00
aaae1dd6a1
Debugger: 2.9.1.4 Changed: Show symbol warnings in Orange, and length of symbols in light blue
2022-01-03 22:15:41 -08:00
48e0fe3a8e
Debugger: 2.9.1.3 Added: DB command now optionally supports =
2022-01-03 21:11:25 -08:00
3985ee9abc
Debugger: 2.9.1.2: Fixed: Off by one end address when deleting DisasmData_t
2022-01-03 21:09:11 -08:00
19b7d43327
Debugger: 2.9.1.1: Added: X command now supports a range and will chop off the appropiate data sections.
2022-01-03 21:07:49 -08:00
561a145ab0
Debugger: Add _GetAutoSymbolName() helper
2022-01-03 21:05:37 -08:00
d63e406573
Correct BMP creation on Linux (PR #1014 )
...
Enable BMP Header packing on all compilers.
Add virtual function to FrameBase to select where to save screenshots.
2022-01-03 14:41:03 +00:00
a243efc74b
Fix for cmd line -dcd not being honoured (regression)
2021-12-24 20:58:04 +00:00
a727db7cc5
Load save-state:
...
. fix for II/II+ when VidHD's SHR is being updated (init memVidHD ptr).
. refactor to consolidate all Mem* related initialisation.
2021-12-23 15:56:14 +00:00
d342f3a17d
Fix for VS2008
2021-12-19 19:26:07 +00:00
577ffccf8f
VidHD: Support SHR for Apple II/II+ models ( #997 , PR #1013 )
...
. Support aux writes for II/II+ (6502 emulation, not 65C02)
. Extend VidHD save-state for II/II+ aux memory
2021-12-19 14:17:51 +00:00
ff65a9f6bf
Save-state: remove ASSERT when saving LC for //e or Enhanced //e
2021-12-18 21:31:17 +00:00
47f721882e
throw std::runtime_error instead of std::string (PR #1011 )
...
+ add more information about location of yaml parser error.
2021-12-18 16:37:28 +00:00
651b57fdae
HDD: fix for slowdown during r/w block operations
...
. firmware does busy-wait RMW (rol abs,x)
. the IORead then IOWrite was flipping the LED status each access, with a huge performance penalty!
2021-12-12 11:53:37 +00:00
19aadbfb8d
Add a top-level catch-handler for std::string
2021-12-11 20:27:39 +00:00
408f5fe42f
Fix for loading save-state - eg. where 'AS-S2_End Credits' & 'OMT-PAL' lost their precise frame cycle
2021-12-11 19:30:54 +00:00
a07ba4ade0
Set SHR alpha channel to 255 for consistency with other video modes. (PR #1010 )
2021-12-11 18:05:06 +00:00
1670e0dbc0
Fix for AppleWin-Test:
...
. don't load floppy/harddisk images (in Registry's Config) if also loading a save-state via cmd-line.
. done to prevent MessageBox alerts when deleted disk images can't be found.
Info: Registry contains refs to disk images, but on test clean-up, the images get deleted.
2021-12-11 18:01:46 +00:00
177c9fec05
Make Slot 0 more consistent with other slots. (PR #1006 )
2021-12-11 15:26:09 +00:00
010d3525d3
HDD read: error if reading block to ROM ( #1007 )
2021-12-11 15:11:13 +00:00
0ac210b132
Debugger: Extend 'brk' cmd:
...
. brk all <on|off>
Fix 'brk' cmd for invalid opcodes of length 2 & 3
2021-12-11 13:41:34 +00:00
1ab0d56558
HDD: remove magic numbers & add GH ref ( #1007 )
2021-12-10 19:37:58 +00:00
bb6fa80335
HDD r/w: error if r/w overlaps with I/O memory
...
. break to debugger if single-stepping
HDD write: support memory accesses across 64KiB boundary
2021-12-09 21:22:13 +00:00
c594d6e101
VidHD: Fix SHIFT+PRINTSCRN for 320x200
2021-12-07 21:59:05 +00:00
443545b0f6
Support SHR video modes with a VidHD card ( #997 , PR #1004 )
...
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd') for SHR video modes only.
- AppleWin window is slightly enlarged when VidHD card is inserted.
Support IIgs 320x200 (and fill mode) and 640x200 video modes.
Debugger: add 'shr' command to view video
CUI: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
2021-11-30 21:41:02 +00:00
0b2104cc89
Card::Save/LoadSnapshot (PR #1003 )
...
Add 2 virtual methods to Card to load and save snapshots.
2021-11-25 20:23:21 +00:00
abc631432d
HDD: fix edge-case for old save-state m_buf_ptr
2021-11-15 20:26:53 +00:00
01f89f88eb
Joystick: Remove buttonlatch & BUTTONTIME ( #1002 )
2021-11-14 17:40:15 +00:00
2e04ce348a
Add Card::Update() (PR #1000 )
...
And use it in ContinueExecution()
2021-11-13 18:13:01 +00:00
8662a99179
Add InitializeIO() to Card and CardManager (PR #999 )
...
. Card::InitializeIO() is pure virtual
. CardManager::InitializeIO() initialises all cards
2021-11-11 21:45:55 +00:00
6282790c3d
Add comments to both Harddisk.cpp & the firmware code about 'sta abs16,x' false-reads, etc.
...
Harddisk.cpp: Fix typos and update the notes on the r/w commands' operation.
2021-11-11 21:20:54 +00:00
5ed901f720
Slot-independent HDD firmware ( #996 , PR #998 )
...
. Move the 'read block' command into the emulator - to mirror the write command
. With emulated time to do the DMA for the r/w block command
2021-11-09 21:04:57 +00:00
d96ed5b8c5
Refactor: move m_slot into Card class
2021-11-01 21:01:28 +00:00
67b3c28833
Refactor: remove slot from InitializeIO() calls for card objects
2021-11-01 20:39:26 +00:00
ff7c9dc185
Make harddisk a class ( #995 )
...
. Add user-protection when unchecking HDD controller (as images aren't restored on a 'cancel')
. Fix possible crash when removing (via Config->Disk) either Disk2 card(s5) or HDD card(s7), then cancelling during emulation
. Fix m_buf[] size
2021-11-01 20:12:42 +00:00
830030ee05
Simplify logic around CConfigNeedingRestart (PR #955 )
2021-10-31 12:14:47 +00:00
ac2233149b
Debugger: Change 'brkint' params to on/off for consistency
2021-10-28 21:00:18 +01:00
ca611eaa64
Mousecard: fix persisting card in slot-4 after a VM restart. ( Fixes #993 )
2021-10-19 21:56:19 +01:00
fa18382757
Core emulation: simplify NMI & IRQ handling
2021-10-18 21:45:45 +01:00
18f5fafb30
DiskII: Remove superfluous IsDiskImageWriteProtected()
2021-10-18 21:13:37 +01:00
f2843d4d71
Collections of changes to facilitate compilation on Linux and macOS. (PR #992 )
2021-10-18 20:23:46 +01:00
9553106f4e
Debugger: Add IRQ support to LBR and new command to Break on Interrupt ( #987 , PR #990 )
...
Extend LBR so that it includes the control-flow on a taken interrupt
Add a new command 'brkint <0|1>' to support Break on Interrupt
Internal: in core emulation loop, moved IRQ/NMI check to start of loop so that just the "interrupt vectoring" case can be single-stepped (instead of previously opcode + interrupt vector).
Debugger help chm: update Breakpoints section to include BRK, BRKOP and BRKINT
2021-10-16 16:57:00 +01:00
4f8b30506d
Debugger: Fix LBR so it's updated only if branch is taken ( #987 )
2021-10-16 11:58:09 +01:00
8575238d69
Debugger: Add a simple LBR command
2021-10-15 21:58:17 +01:00
eee2400984
Uthernet: removed unused Bittypes.h & Pcap-stdinc.h
2021-10-15 21:02:57 +01:00
028c041175
Debugger: fix for 6502 JMP (ABS) - compute correct NMOS target address
2021-10-15 20:36:04 +01:00
aa7d0cf240
Fix one shot paddle timers ( fixes #985 )
2021-10-04 22:08:37 +01:00
51e42d1d4e
SNES MAX: load state: defaulting to no buttons pressed
2021-10-02 15:28:54 +01:00
4cb8a6414d
Uthernet: fix -load-state so that tfe_init() is called
2021-10-02 12:56:55 +01:00
b6c71201cf
Uthernet: remove tfe/tfe_packetpage allocations
2021-09-22 20:46:28 +01:00
4aa6e05528
Support Uthernet save-state ( #984 )
...
Uthernet card: support save/load state
2021-09-21 21:32:14 +01:00
10a83eed61
SAM card: refactor as a class, and support save/load state
2021-09-18 11:55:29 +01:00
ed298b4fd9
Improve save-state card management (PR #983 )
...
Initially all cards are removed before loading save-state.
Use new Registry "Configuration/Slot 2" location to save SSC's port name.
Use new Registry "Configuration/Slot 7" location to save HDV's image names.
Use new Registry "Configuration/Slot n" (and "Configuration/Slot Auxiliary") locations to save all other card types.
Command line: -s<slot> (eg. -s7 empty) now get persisted to the Registry.
Only update 'HDV Starting Directory' for slot7 & drive1.
2021-09-17 20:43:10 +01:00
1b8d26051e
Fix for command line with multiple spaces between args. ( #981 )
2021-09-10 14:51:57 +01:00
35b83765db
Fix for command line -d2 (and -h2): if image can't be opened, this is now reported as an error. ( #980 )
2021-09-10 14:38:40 +01:00
70f097d3ff
Fix 'authentic disk speed' setting. ( fixes #980 )
2021-09-10 14:27:22 +01:00
ad8a7e2810
SNESMAX: minor rename for member vars
2021-09-10 14:19:13 +01:00
685b93f387
Add 4Play & SNES MAX card support ( #946 , #972 , PR #982 )
...
Support these new cards in slots 3, 4 or 5; based on code from Lukazi.
- extend Configuration's Input prop sheet page.
- add save/load snapshot for both cards.
- add command line switch for alt controller type (for SNES MAX card).
Change to using Registry's 'Configuration\Slot 3' for slot 3 cards (Uthernet, 4Play & SNES MAX).
Update help doc.
2021-09-10 13:57:55 +01:00
7b55e994ec
Config GUI for DiskII card in slot-5 & improved slot config in Registry ( #975 , #977 , PR #978 )
...
Change to using Registry's 'Configuration\Slot n' for disk ii image pathnames (was 'Preferences').
Delete Registry's 'Configuration\Slot n' section each time there's a change of card.
Add same functionality to conf.ini.
LoadConfiguration(): load from the new Slot-n section (or otherwise the old legacy key).
Only update Registry's 'Starting Directory' for s6,d1.
Update help doc.
2021-08-29 11:39:51 +01:00
3fece5e621
Minor interface change to PropertySheetHelper
2021-07-29 13:31:33 +01:00
c20c9c2c9c
Fix Coverity CID 1506067 in Debug.cpp
2021-07-28 14:09:22 +01:00
405de2be14
Fix Coverity - High Impact defects:
...
. uninitialised vars in Debug & Win32Frame
2021-07-28 12:47:05 +01:00
f4650fb850
MB: Make AY voice & mix buffers the same size to prevent buffer overrun
...
(Voice buffer reduced from 1s to 0.37s)
2021-07-28 12:22:58 +01:00
6a5017bf91
SSI263: fix potential buffer overrun & rename var so it's explicit that it is a byte-size
2021-07-28 12:14:22 +01:00
4375418506
Move some "char *"to "const char *", and avoid unnecessary c_str(). (PR #973 )
2021-07-25 11:55:25 +01:00
71bea52419
Disk/Harddisk: Insert() - fix comment and rename var
2021-07-15 19:23:01 +01:00
4f45202baf
Save full pathname to registry. ( #960 PR #959 )
...
This was already happening for Hard Disks (although in a convoluted way).
Extend to Floppy Disks.
2021-07-13 21:24:29 +01:00
3d0cdd55d1
Make a few utility funcs static
2021-07-11 12:06:29 +01:00
7086ea5208
Full-screen / resolution change: fix display flicker. ( Fixes #965 )
2021-06-19 15:06:04 +01:00
1962a3c337
Switch to a static hook filter ( #962 , PR #964 )
...
Remove the HookFilter.dll which had a dependency on VCRUNTIME140.dll
2021-06-09 21:48:24 +01:00
793f2eb507
Cmd line: -fs-height: small refactor so that bestWidth/Height are only returned for logging purposes
2021-05-31 16:40:44 +01:00
f076986c04
Cmd line: Changed -fs-height=<best|nnnn> so it doesn't change the resolution when not full-screen ( #876 )
...
. NB. whenever switching back to non-full-screen, then it will restore the default desktop resolution.
. Allow -no-full-screen to be placed before -fs-height=<best|nnnn> (previously it only worked when placed afterwards)
2021-05-31 16:09:39 +01:00
0ca972954e
MB: fix for SSI263/SC01 in debugger's 'gg' mode ( fixes #958 )
2021-05-29 21:53:18 +01:00
7f0c028250
Typo: fix IS_APPLE2() macro
2021-05-23 21:28:26 +01:00
d631b23d24
Uthernet: fix usability and settings (PR #947 )
...
* Make Uthernet settings behave like all other cards.
Fix as well the fact that the Uthernet interface would not be reapplied after a restart.
* Uthernet: use consistent types to reduce code complexity.
Use std::string everywhere.
2021-05-19 21:44:33 +01:00
05b9668f72
Use enum SLOTS and remove pre-processor SLOTn defines
2021-05-19 21:26:23 +01:00
de7f35e6bd
Make path separator OS-dependent (PR #954 )
2021-05-19 21:10:22 +01:00
1b9a769332
Fix to DirectSound not working in modern environments. Need to use FAILED() instead of boolean check. (PR #951 )
2021-05-16 20:03:59 +01:00
110a706535
SC-01: fix DDRB support for #952
2021-05-16 19:49:34 +01:00
21146cb65e
AY8913: Fix regression at 2d086e87
...
- Phasor does support reading regs in MB mode & Phasor native mode (but not Echo+ mode).
2021-05-16 19:27:04 +01:00
ce309324bb
Debugger: when displaying 6522 regs, if T1/T2 are active, then display in white
2021-05-09 13:38:16 +01:00
5bc1261281
Logging: add more logging to Speaker code
...
Debug: add a debug-enabled MB S/S card
2021-05-03 19:58:13 +01:00
60ddf0fa35
6522: Support cycle accurate reads from IFR for T1/T2 bits
2021-04-30 22:23:20 +01:00
f959f4f1d6
Uthernet: enable support on Linux. (PR #943 )
...
* Make tfe easier to compile in Linux.
* libpcap in Linux: we can just use the libpcap provided and link to it directly.
2021-04-23 20:59:02 +01:00
9bec2ce405
Avoid a crash if the LogFile cannot be opened. (PR #944 )
2021-04-23 20:49:31 +01:00
41778aa472
Debugger: move Win32 functions to separate file. (PR #941 )
...
* Debug.cpp: move Win32 functions to separate file.
* Move _tcscat -> strcat to maximise portability.
* Remove unneeded Win32 check.
2021-04-23 20:39:24 +01:00
c6c427aa3d
Debugger: Fix bound on maximum bytes to move backward. (PR #937 )
...
The higher g_nDisasmCurLine the more we will have to travel back to find the instruction at the top of the window.
2021-04-23 20:34:46 +01:00
6fefce553a
MB: Support old save-states where 6522 T1 latch is 0x0000
2021-04-18 18:33:16 +01:00
26414b74df
Fix for a2audit failing Apple II/II+ LC test
...
. For II/II+ with NSC at F8xx, then (for NSC) also exclude the r:ROM/w:RAM (C089) case
2021-04-18 11:23:06 +01:00
e7a3f97bb6
SSI263: For SC01, don't change reg0.DUR value
2021-04-17 18:30:11 +01:00
1314fcc0ed
Swap joystick buttons ( #936 )
...
. cmd-line (-swap-buttons) or GUI "Swap 0/1" now swaps buttons 0/1 for all devices
. ie. Open/Solid Apple keys, real joystick, mouse or Num Pad keys
+ update the docs
2021-04-10 19:09:36 +01:00
363193ba33
MB: get rid of CriticalSection, as MB support is now single-threaded
2021-04-10 16:26:51 +01:00
b5726aae7d
Add some random woz jitter ( #942 )
...
Improve WOZ support for WL and LOA (#930 )
- After T$00,S$00 (for certain 4&4 encodings) randomly skip 1 bit-cell
- Remove the previous fix for WL/LOA which was affecting other titles
2021-04-10 15:31:54 +01:00
a37d0b078f
Add constructor for SY6522_AY8910 for correct initialisation (PR #940 )
...
Avoid leaks when the destructor of SY6522_AY8910 is not called.
2021-04-05 17:44:59 +01:00
7a41ede6d9
SSI263: improve logging
2021-04-05 14:56:55 +01:00
27fe4e5ed0
SSI263: when loading state, assert Phasor's speech IRQ if required
2021-04-01 20:52:00 +01:00
33492ac9a2
On reset: clear Phasor speech IRQ
2021-03-31 22:09:04 +01:00
91f2c43992
Disable SC01 logging
2021-03-28 22:18:00 +01:00
2258d01184
MB: SC01 is only mapped to the 6522 at Cn00
2021-03-28 22:16:34 +01:00
fea5da7872
Logging: add support for SC01
2021-03-28 12:16:57 +01:00
96bbc0c435
Improve SSI263 (PR #939 )
...
New class for SSI263 (2 instances per MB/Phasor card)
- support 2nd SSI263 at $Cn20 connected to 6522-A (at $Cn00)
Switch from one-shot phoneme playback to ring-buffer
Use a new dedicated ring-buffer (distinct from the AY8910 ring buffer)
Gets rid of: SSI263Thread, the 2 events, and the 64 voices
Support the 2-bit Duration b7:6 of phoneme register for both SC01 & SSI263 (to fix #929 )
Updated save-state
Updated IRQ logging (output cycle & 6522 source)
2021-03-23 22:01:41 +00:00
fb6433fb7a
Debugger_Disassembler.cpp: add GPL boilerplate text
2021-03-17 20:42:40 +00:00
c7f515015b
Debugger: Separate disassembler functions from display (PR #933 )
...
Makes it easier to use them in different environments.
2021-03-17 20:32:19 +00:00
3f75012c0e
Windows speech: trap calls to COUT1 and BASICOUT (instead of COUT) ( #934 )
2021-03-09 21:06:37 +00:00
0858cc3a23
Debugger: improve mem views for 6522 & AY8913 chips
2021-03-07 13:11:22 +00:00
3766c1e014
Debugger: fix to wrap 16-bit addr for mem watch (was getting AppleWin debugger crash)
2021-03-02 18:14:36 +00:00
2d086e87ec
Support 2nd SSI263 at $Cn20
...
Phasor doesn't support reading AY8913 regs
2021-02-21 19:12:36 +00:00
2cd2f013e6
Disk: improve DebugTrackWOZ() func
2021-02-20 12:32:29 +00:00
0bb34bfb48
Disk: remove debug DumpSectorWOZ() func
2021-02-19 16:21:44 +00:00
a709e9dbdf
MB/SSI263: improve logging to include phoneme duration
2021-02-17 21:53:15 +00:00
2f4bbd2b8a
Avoid ASSERT from MB_Reset() on exit
2021-02-15 21:47:21 +00:00
4e88163430
MB/6522: better reset support - only ACR,IFR,IER affected
2021-02-13 16:56:29 +00:00
84a705d20d
MB/6522: improve T1 underflow with latch
2021-02-12 19:16:14 +00:00
ff29b055ce
MB/6522: fix timer1 underflow for very small values
2021-02-11 22:44:40 +00:00
8c2b38d19d
Enable ConformanceMode in VS2019. (PR #923 )
...
This reduces the chances of incompatibility between gcc and vs.
99% is "const char *" literals.
1 case of a goto jumping over a variable declaration (but it is not needed).
2021-02-10 21:05:00 +00:00
466207f5d3
Save-state: load/save dialog: Remove ; to concatenate string and avoid unused code. (PR #924 )
2021-02-10 20:55:58 +00:00
776a48fc01
MB/6522: support for T1 latch in one-shot mode
2021-02-10 20:51:11 +00:00
f3b6b8665f
Debugger: fixes to wrap 16-bit addr (was resulting in AppleWin debugger crashes)
2021-02-07 16:58:11 +00:00
c492004e8d
6522 read: support non 4-cycle read opcodes ( #833 )
...
. ie. addr modes: (zp,x), (zp),y and (zp)
2021-02-06 18:02:35 +00:00
f302e88f55
Add 6522 support for stz abs16 and stz abs16,x
2021-02-05 22:30:05 +00:00
fcafa18340
Debugger: add red 'IRQ' after the v/h-pos when IRQ is being asserted to the 6502
2021-01-31 19:38:06 +00:00
fad4dd2ad1
Disable debug-logging for previous AY8913 fix
2021-01-30 12:50:33 +00:00
024e97ac9b
MB-AY8913 fix so that no AY changes get dumped ( #770 )
...
. Needed for read of AY8913 regs too, during built-in debugger stepping (mb-audit)
2021-01-30 10:34:46 +00:00
a3666edf48
MB: read fix
2021-01-28 20:15:23 +00:00
baad40f3b8
SpkrSetEmulationType(): simplify logic and remove unreachable code. (PR #919 )
2021-01-20 21:30:34 +00:00
cdf1cb9106
Remove usages of g_hFrameWindow and g_hInstance from core emulator files. And Resource related Win32 functions. (PR #915 )
...
. Win32Frame: remove WM_USER_RESTART.
2021-01-19 20:37:43 +00:00
81279904e2
Pravets: fix bug in ctor
2021-01-18 20:30:51 +00:00
44fa610ef6
Pravets.cpp: convert to UTF8 to allow VS2019 to build
2021-01-17 22:21:33 +00:00
5d46298dcc
Mockingboard: support AY-3-8913 read
2021-01-17 19:51:25 +00:00
daa0675694
Pravets refactor: move all specialisations into new Pravets class. (PR #914 )
...
Mainly for keyboard & printer specialisations.
2021-01-17 10:48:06 +00:00
fc3a0f57ce
Win32Frame: Fixes for VS2008
2021-01-16 22:13:02 +00:00
61db149eab
Move last remaining globals from WinFrame.cpp to class Win32Frame. (PR #913 )
2021-01-16 21:57:28 +00:00
440831179f
Keyboard: improve illegal keycodes handling for II/II+ and clones.
2021-01-16 11:01:18 +00:00
7d2ddb3556
Base 64A: support special F2 key via the Delete key (GH#912)
2021-01-14 21:32:59 +00:00
816e22524f
VideoReinitialize(): remove default arg & refactor out common code (PR #911 )
2021-01-13 22:02:48 +00:00
6cffb30330
FrameBase: some changes to ease implementations (PR #910 )
...
. simplify the interface FrameBase to make it easier to implement it for different cases (remove HDC and make parameters more explicit)
. remove functions which are only called on a Win32Frame (in which case a cast is guaranteed to succeed)
. otherwise there is the risk that every FrameBase implementation wants to add its own variants.
. FrameBase::FrameRefreshStatus() simplify implementation: pass all flags explicitly
2021-01-10 16:33:06 +00:00
159cde7d64
Video & FrameBase: better split (PR #908 )
...
* Video / FrameBase: move arch specific code to FrameBase.
* Video::Initialize & SetFrameBuffer.
Ensure initialization and SetBuffer can only happen in the right order.
* Video: move virtual functions to FrameBase.
With these changes all the virtual functions are in FrameBase and Video gets closer to be (only) the Apple ][ Video device.
* Move a few more functions from Video to FrameBase (snapshot related)
Now, the inclusion is one way with Video *not* including FrameBase.
* FrameBase::VideoRefreshScreen move Video related code to Video.
And only leave management to FrameBase.
2021-01-03 16:21:24 +00:00
0139878dd7
x64 enabling (PR #747 )
...
Here are a few changes to make 64-bit build possible.
The changes are mainly to use windows api in the correct way that works for both 32-bit and 64-bit builds.
2021-01-01 12:57:40 +00:00
9d7aa7d309
Move VideoRedrawScreen() to Video. (PR #904 )
2021-01-01 12:42:24 +00:00
c7d9a780bb
Minor tweaks + comment for GCC needing header file
2020-12-29 21:45:56 +00:00
d0cd7ca090
WinVideo: share some generic code (PR #901 )
...
* WinVideo: move some generic functions back to Video.
Introduce a new virtual function (VideoPresentScreen) to draw the video buffer to video memory.
* Move Win32Frame::VideoRedrawScreen() to FrameBase as it is generic.
2020-12-29 21:30:17 +00:00
b226bdfd53
Small changes to improve compatibility with GCC. (PR #902 )
...
* Fix GCC build.
1) do not fwd declare enums
2) include only base class header file IPropertySheet.
* DSInit(): make sure sound devices are cleaned before the 2nd call.
And use std::string to avoid need of memory management.
2020-12-29 21:17:03 +00:00
6cf907f303
In Linux, save logfile to /tmp. (PR #900 )
2020-12-29 21:13:35 +00:00
3aa5750dcf
Make Video.cpp and WinVideo.cpp into a dependent class hierarchy (PR #898 )
...
. class hierarchy: WinVideo IS_A Video (ie. WinVideo is a subclass of Video)
. GetVideo() singleton instance of WinVideo in AppleWin.cpp, exposed via Interface.h
2020-12-28 16:25:29 +00:00
3c6f0c1145
Add option to disable warning when PrintScreen key can't be captured (PR #891 )
...
NB. Windows XP or higher
2020-12-27 19:21:46 +00:00
b8296e6c9c
Frame.h: merge into Video.h. (PR #896 )
...
. The functions GetFrameBufferXXX() have been moved next to g_pFramebufferbits.
2020-12-27 19:01:35 +00:00
e27879ac99
Move interface into a class FrameBase. (PR #893 )
...
. Move the Win32 implementation into Win32Frame.
2020-12-24 15:08:50 +00:00
8d7d2b9647
VS2019: new debug/release configurations for v141_xp ( #693 )
...
. NB, the Microsoft SDK 7.1A doesn't contain dxguid.lib & ddraw.lib, so they are linked against these two dx libs that are already part of the AppleWin repo.
2020-12-20 18:44:25 +00:00
97643e304f
Fix build for missing include of Interface.h
2020-12-20 15:39:53 +00:00
2d2ba86f4f
IPropertySheet: make it a standard C++ class with pure virtual functions (PR #892 )
...
* Interface.h: ensure that functions in the interface are not exported by other header files.
This is generally harmless, except for the presence of default arguments, in which case the version with default arguments must come first.
To avoid the issue, these functions are only ever exported in the Interface.h header file.
2020-12-20 15:32:51 +00:00
469f9ba807
Support disconnecting drives from DiskII Interface card: -d1-disconnected, -d2-disconnected
2020-12-12 20:49:46 +00:00
tomcw
Andrea
Kelvin Lee
Michael "Code Poet" Pohoreski
sh95014
michaelangel007
Henri Asseily
Kevin Marty