Supports:
- all "woz test images" v1.3 (WOZ1, WOZ2) are working, except 3.5"
- additionally: Frogger (spiradisc), Choplifter (not Enhanced //e!), Lode Runner, Marble Madness, Skyfox.
- woz images can be .gz or .zip compressed (ie. same as other supported images)
- save-state
Limitations:
- read-only, so WOZ images are forced to be write-protected
. as a result, games that need r/w images won't work (Stickybear Town Builder, Wizardry)
- 5.25" only (not 3.5")
- Added Configuration GUI to include checkbox for "50Hz"
- Implicitly use PAL or NTSC base 6502 clocks depending on video refresh rate
- Added new -50hz and -60hz command line switches
- Updated save-state for video refresh rate
1.28.8.0: Updated version & history.txt
Updates for DHGR MIX (#633):
. Support new switch -rgb-card-invert-bit7 to invert bit7 for Dragon Wars.
- Reverted DHGR MIX mode and AN2 off to invert bit7
Support the old AppleWin 1.25 vertical blending for hires:
- extended Config dialog to include 'Vertical Blend' checkbox
- Persist 'Video Styles' to Registry
- new cmd line options to select this style & also select 'RGB (Color Monitor)'
- code refactor to support enum VideoStyle_e (and replaced g_uHalfScanLines with a bit in g_eVideoStyles)
Bumped version to 1.28.2.0.
Renamed this video mode to: "Color (RGB Monitor)"
Also renamed "Color (Monitor)" to "Color (NTSC Monitor)".
As for the colours: I've changed them from the original 1.25 colours. Instead I runtime-generate the colours from the NTSC code. See NTSC.cpp's GenerateBaseColors(). This shifts the same 4-bit pattern in, combining with NTSC color phase, until the colour stabilises. Then I average the next 4 RGB values to get the final colour. The reason for this is that we now have consistent colours between NTSC and this simplified rendering mode.
NB. The 2 greys (in GR,DGR,DHGR) are now the same RGB value.
Added new cmd-line switch: -videorom <file> to replace the video ROM for the Enhanced //e.
- Support video ROM sizes of 4K, 8K and 16K (top 8K only).
- NB. The rocker switch is set to European video ROM.
F10 (for //e or Enhanced //e models) emulates the PAL //e's rocker switch (under the keyboard) to toggle between European or US video ROM.
Other:
- Fixed debugger's view of the AltCharSet soft-switch (it was showing the opposite state).
Added support for #590:
* Changed Apple II original to default to no LC
* Added new cmd-line switch: -s0 <languagecard|lc>
* Changed so when LC is in slot-0, it now use Apple II+'s F8 (auto-start) ROM
Support for #408:
* added slot-0 LC and Saturn 128K for Apple II and II+
* added save-state support
- for slot-0 LC/Saturn, save the LC state in the slot-0 card, not the //e MMU; and switch to a new Apple2 unit ver2
* added g_Slot0, g_SlotAux
* added new LanguageCard.cpp/h to project and moved Saturn code into these new files.
* updated VS2013,2015,2017 projects
Support partial reads for sequential accesses of 6 or less cycles.
- And 31 or less cycles when in "Disk Access Speed" = "Authentic Speed"
Save-state support for partial read cycle (Disk][ unit v3)
Added boot-time logging for Phasor1.dsk (ProDOS 1.1.1)
. reverted default so that ALT+TAB is not hooked (#556)
. reverted default so that ALT GR's fake LCONTROL is not hooked (#558)
. added new switches: -hook-alt-tab and -hook-altgr-control to support hooking these key combo's (#556)
. Created a dedicated thread with message loop (#570)
HookFilter dll: Only call GetKeyState() if keycode is ESC (instead of every time)
DebuggerCursorUpdate(): reduce sleep from 10ms to 1ms
. When in MODE_LOGO, don't pass WM_CHAR to Apple II keyboard (now consistent with WM_KEYDOWN)
. Small refactor for Apple II keyboard's WM_KEYDOWN handler
Move code for log init & done to Log.cpp
. Also suppress ALT+SPACE
. PostMessage to AppleWin message-pump for WM_KEYDOWN, WM_KEYUP for these special key combos
. Add special any-key-down (AKD) handling for these special key combos
. DCD state is now a mirror of DSR unless -dcd switch is used. (Fixes#553)
. Removed -dsr,-dtr switches, so -modem is now an alias for -dcd. (Also for #553)
. Wait for events (RLSD,DSR,CTS) in CommThread and call GetCommModemStatus() in CommThread.
. Support TX IRQ for both TCP and COM modes (fixes#522)
. Support CTS/RTS (fixes#311)
. Fixed reading DIPSW registers
. Fixed TCP mode which was only generating an IRQ for first byte received
. Added UpdateCommandReg() to consolidate all updates to SSC command reg
. Updated reference URLs
* Fix the following errors reported by VS2017 Code Analysis.
applewin\source\applewin.cpp(761): warning C6385: Reading invalid data from '"Disk Image"': the readable size is '11' bytes, but '21' bytes may be read.
applewin\source\debugger\debug.cpp(6624): warning C6386: Buffer overrun while writing to 'sName': the writable size is '31' bytes, but '32' bytes might be written.
applewin\source\debugger\debugger_display.cpp(3715): warning C6053: The prior call to 'strncpy' might not zero-terminate string 'sText'.
applewin\source\log.cpp(42): warning C6053: The prior call to '_vsnprintf' might not zero-terminate string 'output'.
applewin\source\debugger\debug.cpp(2759): warning C6011: Dereferencing NULL pointer 'pFont'.
applewin\source\debugger\debugger_symbols.cpp(243): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'pText'.
applewin\source\diskimagehelper.cpp(1132): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'pszExt'.
applewin\source\diskimagehelper.cpp(1141): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'szFilename'.
applewin\source\parallelprinter.cpp(242): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'g_szPrintFilename'.
The one about RegSetValue(), according to Microsoft
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724922(v=vs.85).aspx
the last argument cbData is ignored, so I set it to 0, as in some cases was anyway wrong (see "DiskImage").
Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
* Use sizeof() rather than hardcoded value.
Fix one more case on non terminated string.
Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
Changes to ease code compilation in GCC.
Disk_t and HDD contain a std::string and for this reason they need a proper constructor, ZeroMemory is not guaranteed to work.
. .dsk / .nib images
. ProDOS format / DOS 3.3 init
. authentic / enhanced disk access speed
For zero-length files, resize to the complete file size when first opened (#506)
. Support both .dsk and .nib
Created a new class FormatTrack to encapsulate the new track formatting logic
Improved precision of 'authentic' drive mode's spin emulation (#125)
Save-state: (save-state DiskII unit v2)
. support Format Track state
. save DiskLastCycle
DenibblizeTrack(): added some debug asserts and comments
Updated for VS2008/VS2013/2015/2017 projs & remove dependency on ddraw.lib for VS2013/2015
Updated disk logging:
. Moved all LOG_DISK_xx macros to new DiskLog.h (since shared by Disk.cpp and DiskFormatTrack.cpp)
. For write nibble: option to log cycle count & sync byte count
. For written track: option to log gap1/2/3 and track size
. For disk latch r/w: option to log when D5AA96 detected
Other:
. Debugger: Fix CD cmd to support absolute paths (#505)
