- Added Configuration GUI to include checkbox for "50Hz"
- Implicitly use PAL or NTSC base 6502 clocks depending on video refresh rate
- Added new -50hz and -60hz command line switches
- Updated save-state for video refresh rate
1.28.8.0: Updated version & history.txt
Updates for DHGR MIX (#633):
. Support new switch -rgb-card-invert-bit7 to invert bit7 for Dragon Wars.
- Reverted DHGR MIX mode and AN2 off to invert bit7
For the RGB hires look-up table:
- extended to include the previous video byte's high bit
- so it's now: {previous high bit + prev 2 video bits + next 2 video bits} & current byte
For all the RGB look-up tables:
- reduced from 512 to 256 lines (only 256 were being used, so it was just wasting space)
Refactored CopyMixedSource():
- fixed the Rainbow demo (#627)
- sped up in Debug config
Bumped version to 1.28.3.1.
Support the old AppleWin 1.25 vertical blending for hires:
- extended Config dialog to include 'Vertical Blend' checkbox
- Persist 'Video Styles' to Registry
- new cmd line options to select this style & also select 'RGB (Color Monitor)'
- code refactor to support enum VideoStyle_e (and replaced g_uHalfScanLines with a bit in g_eVideoStyles)
Bumped version to 1.28.2.0.
Added new cmd-line switch: -videorom <file> to replace the video ROM for the Enhanced //e.
- Support video ROM sizes of 4K, 8K and 16K (top 8K only).
- NB. The rocker switch is set to European video ROM.
F10 (for //e or Enhanced //e models) emulates the PAL //e's rocker switch (under the keyboard) to toggle between European or US video ROM.
Other:
- Fixed debugger's view of the AltCharSet soft-switch (it was showing the opposite state).
. SSC: For TCP mode, support DSR, DCD & CTS status bits (#308).
. SSC: Now DTR must also be set to enable interrupts (in addition to the respective Tx/Rx interrupt bit).
. SSC: When reading the Status register, throttle calls to GetCommModemStatus() to a maximum of once every 8ms.
* Support precise AY8910 sound-buffer filling when polling 6522 IFR.Timer1 (ACR=Free Running mode)
- same as if using 6522 IER.Timer1 interrupt
* Support 6522's Timer2 and some code refactoring
* Bump version: 1.26.3.4
1.26.0.1
. NTSC video modes (TV Color, TV B&W, Monitor Color, Monitor B&W)
. Full Screen using native resolution (not 640x480)
NB. 6502 emulation is slower now, which means disk loading (ie. full-speed) is slower.
. EG. Aztec.dsk: from F2 boot to "Press any key". (Release build, 50% "TV Color", not run in VS, VAIO laptop)
~4 secs: AppleWin 1.25.0.3 (built with VS2005)
~7 secs: AppleWin 1.26.0.1 (built with VS2008 or VS015)
The Configuration Dialog -> Disks tab now has combos to show
insert/eject disks, as well as it now the images are automatically
swapped if you try to insert on one drive the image connected to the
other
The Apple logo was redone following the same-ish colour pattern but with
a more modern look.
(*) Updated based on first review:
- Removed bmp from this pull request (coming later)
- Corrected resource's constants values and deleted unused one
- Initializing variables in CPageDisk constructot
The Configuration Dialog -> Disks tab now has combos to show
insert/eject disks, as well as it now the images are automatically
swapped if you try to insert on one drive the image connected to the
other
The Apple logo was redone following the same-ish colour pattern but with
a more modern look.
