Added new SmartPort Harddisk Controller (HDC) firmware for Enhanced //e. (@burniouf)
. remove the old DOSMaster entrypoints.
. firmware ID byte (at $FE) defaults to 4 ProDOS block devices (was 2 with older v2 f/w).
Enhanced //e defaults to using SP f/w, and older Apple II's still use the older v2 f/w.
Support up to 8 units per HDC (currently limited to 4GiB capacity for each unit).
Save-state: save HDC firmware in state file.
New slot-specific switches to configure each HDC's firmware: -s<N> -hdc-[sp|bm2|bm4].
New switch to select old non-SP firmware for all HDCs: -hdc-firmware-v2.
Changes:
- Add a drop-down menu to the 'Advanced' tab that lets the user select a dongle in use
- Add a new file "CopyProtectionDongles.cpp" that is a place to put drivers for these.
- Add a driver for the one known dongle we have now - Speed Star
- Modify Joystick.cpp to allow PB0-PB2 to be "pushed" by the protection dongle.
. In 2x windowed mode: always show slot 5 Disk II LEDs.
. Add tooltips for slot 5/6 track/sector info (d1 & d2) - shows dec/hex & fractional track position.
- but this track/sector info is now on a UI toggle in the Config -> Disk tab.
. Debugger: add 'DISK SLOT n' - to set current slot of Disk II card
- ie. support 'DISK INFO' for slot 5
Uthernet II: add extended feature to virtualise DNS requests.
. This allows pure TCP/UDP sockets to run *without* MACRAW requests (and so without libpcap).
. Raw sockets will not work.
. Add configuration for Virtual DNS.
libpcap: ensure all functions check if the library is loaded before using it.
Uthernet 1: do NOT overwrite tfe_cannot_use as it should only reflect the availability of npcap on *this* system.
Add Copyright notice, and mention Virtual DNS in html.
Initially all cards are removed before loading save-state.
Use new Registry "Configuration/Slot 2" location to save SSC's port name.
Use new Registry "Configuration/Slot 7" location to save HDV's image names.
Use new Registry "Configuration/Slot n" (and "Configuration/Slot Auxiliary") locations to save all other card types.
Command line: -s<slot> (eg. -s7 empty) now get persisted to the Registry.
Only update 'HDV Starting Directory' for slot7 & drive1.
Support these new cards in slots 3, 4 or 5; based on code from Lukazi.
- extend Configuration's Input prop sheet page.
- add save/load snapshot for both cards.
- add command line switch for alt controller type (for SNES MAX card).
Change to using Registry's 'Configuration\Slot 3' for slot 3 cards (Uthernet, 4Play & SNES MAX).
Update help doc.
Change to using Registry's 'Configuration\Slot n' for disk ii image pathnames (was 'Preferences').
Delete Registry's 'Configuration\Slot n' section each time there's a change of card.
Add same functionality to conf.ini.
LoadConfiguration(): load from the new Slot-n section (or otherwise the old legacy key).
Only update Registry's 'Starting Directory' for s6,d1.
Update help doc.
Switched Mockingboard/6522 Timer interrupts & Mousecard's VBlank interrupt to use synchronous events.
This is a linked-list of ordered timer-based event, where only the head of the list needs updating after every opcode.
Removed 65d02.h and reconstructed this code using a combination of existing 6502.h/65c02.h and extra C Pre-Processor macros to include (or omit) the extra heatmap functionality.
We still end up with a normal 65c02 instance and also a debug 65c02 instance, but both will derive from the same 65c02.h file (+ same for the 6502 normal/debug instances).
Also:
. Added cpu_heatmap.inl for the built-in debugger's read/write operations.
. Support CpuRead/Write() from Z80 to hook the heatmap r/w.
. It's an Apple II plus clone.
. The 48K bank-switched Rom is controlled with AN0 and AN1.
. The character generation video Rom has two full character sets: English and German (F10 to switch).
NB. At the prompt, "TEST" runs the ROM self-test.
. Due to INTCXROM still being set and it not being excluded when in II+ mode.
. Fix is to reinit memmode on restart and only check INTCXROM if IIe or above.
- Added Configuration GUI to include checkbox for "50Hz"
- Implicitly use PAL or NTSC base 6502 clocks depending on video refresh rate
- Added new -50hz and -60hz command line switches
- Updated save-state for video refresh rate
1.28.8.0: Updated version & history.txt
Support the old AppleWin 1.25 vertical blending for hires:
- extended Config dialog to include 'Vertical Blend' checkbox
- Persist 'Video Styles' to Registry
- new cmd line options to select this style & also select 'RGB (Color Monitor)'
- code refactor to support enum VideoStyle_e (and replaced g_uHalfScanLines with a bit in g_eVideoStyles)
Bumped version to 1.28.2.0.
Added support for #590:
* Changed Apple II original to default to no LC
* Added new cmd-line switch: -s0 <languagecard|lc>
* Changed so when LC is in slot-0, it now use Apple II+'s F8 (auto-start) ROM
Support for #408:
* added slot-0 LC and Saturn 128K for Apple II and II+
* added save-state support
- for slot-0 LC/Saturn, save the LC state in the slot-0 card, not the //e MMU; and switch to a new Apple2 unit ver2
* added g_Slot0, g_SlotAux
* added new LanguageCard.cpp/h to project and moved Saturn code into these new files.
* updated VS2013,2015,2017 projects
1) Uthernet card now returns floating bus for slot ROM at $Cs00-CsFF (where s=3).
2) Fixed IoHandlerCardsIn() to not map in the card in slot3's slot ROM when SLOTC3ROM=0.
Also:
. moved the typedef 'iofunction' from common.h to memory.h
. Debug 'G(o)' cmd now defaults to normal speed (and precise video updates)
. New debug 'GG' cmd enables full speed (and periodic video updates)
. Single-stepping (normal or full speed) now routed through ContinueExecution()
. Removed Cpu6502()/Cpu65C02() check for debug breakpoints
. Removed the (undocumented) SHIFT+F7 feature to exit debugger for 'normal speed breakpoints'
. Removed the g_bDebugNormalSpeedBreakpoints variable
1.26.0.1
. NTSC video modes (TV Color, TV B&W, Monitor Color, Monitor B&W)
. Full Screen using native resolution (not 640x480)
NB. 6502 emulation is slower now, which means disk loading (ie. full-speed) is slower.
. EG. Aztec.dsk: from F2 boot to "Press any key". (Release build, 50% "TV Color", not run in VS, VAIO laptop)
~4 secs: AppleWin 1.25.0.3 (built with VS2005)
~7 secs: AppleWin 1.26.0.1 (built with VS2008 or VS015)
Also:
. support new CpuType independently of Apple2Type
. save-state: don't save disk track image if no disk
. save-state: re-init AppleWin internals & UI to reflect changed Apple2Type
. Format now extensible for supporting new hardware types in the future
. Include missing items like Apple2Type, CyclesThisVideoFrame (#255)
Continue to support loading of old v1 format.
Added card save/load for:
. Mouse (#260)
. HDD (#260)
. Printer
Extended card support for:
. SSC
Other:
. Added save-state v1 struct size checks
. Create SaveState_Structs_v2.h and split out common into SaveState_Structs_common.h
. Refactor HardDisk.cpp to use imagehandle; and consolidate with Disk.cpp
. Fix Disk/HD_GetFullPathName() which wasn't always returning full pathname
. Consolidate common GetImageTitle() and move into DiskImage.cpp
