47 lines
1.5 KiB
Plaintext
47 lines
1.5 KiB
Plaintext
{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset0 Courier New;}{\f1\fswiss\fcharset0 Arial;}}
|
||
{\*\generator Msftedit 5.41.15.1507;}\viewkind4\uc1\pard\f0\fs20 =-------------------------------------=\par
|
||
=-> Freeze's F-8 ROM A PPG release <-=\par
|
||
=-------------------------------------=\par
|
||
\par
|
||
The Freeze's F-8 ROM is a modified F-8\par
|
||
rom that has several added features.\par
|
||
\par
|
||
-Old Monitor Reset\par
|
||
-Step and Trace modes\par
|
||
-Disassembly with ASCII\par
|
||
-Disassembly with Binary in #Mode\par
|
||
-Better sounding bell!\par
|
||
\par
|
||
These advanced features make Monitor\par
|
||
programming and Cracking much easier.\par
|
||
\par
|
||
There are two ways you can use this\par
|
||
program. Either load it into the RAM\par
|
||
Card using the FREEZE.INSTALL program.\par
|
||
The other way is to burn it onto a\par
|
||
2716 EPROM (Schematics later).\par
|
||
\par
|
||
The only thing that really need an\par
|
||
explanation is the disassembly. In the\par
|
||
disassembly, it displays the ASCII\par
|
||
value of the byte to the right. The\par
|
||
binary numbers on the far right are\par
|
||
displayed when an instruction on the\par
|
||
accumulator in immediate mode is\par
|
||
encountered.\par
|
||
\par
|
||
2716 Schematics\par
|
||
===============\par
|
||
\par
|
||
I would suggest that you do these\par
|
||
modifications to a socket rather than\par
|
||
directly to the chip...\par
|
||
\par
|
||
First, cut off pins 21 and 18.\par
|
||
Connect pins 12 and 18\par
|
||
Connect pins 21 and 24\par
|
||
\par
|
||
---------------------------------------\par
|
||
\f1\par
|
||
}
|
||
|