AppleWin/source/CommonVICE/6510core.h
tomch 3318abc622 Merge from AppleWin-Tom (r396-423):
- Replaced all non-GPL modules with GPL ones (6821, AY8910, Z80)
  . 6821 now from VICE (was MAME)
  . AY8910 now from FUSE (was MAME)
  . Z80 now from VICE (was Z80Em)
- Fix for Willy Byte & MB support (strange 6522 behaviour!)
2009-01-09 23:27:29 +00:00

88 lines
3.5 KiB
C

/*
* 6510core.h - Core definitions for the MOS 6510 CPU emulation.
*
* Written by
* Ettore Perazzoli <ettore@comm2000.it>
* Andreas Boose <viceteam@t-online.de>
*
* This file is part of VICE, the Versatile Commodore Emulator.
* See README for copyright notice.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307 USA.
*
*/
#ifndef _6510CORE_H
#define _6510CORE_H
/* Masks to extract information. */
#define OPINFO_DELAYS_INTERRUPT_MSK (1 << 8)
#define OPINFO_DISABLES_IRQ_MSK (1 << 9)
#define OPINFO_ENABLES_IRQ_MSK (1 << 10)
/* Return nonzero if `opinfo' causes a 1-cycle interrupt delay. */
#define OPINFO_DELAYS_INTERRUPT(opinfo) \
((opinfo) & OPINFO_DELAYS_INTERRUPT_MSK)
/* Return nonzero if `opinfo' has changed the I flag from 0 to 1, so that an
IRQ that happened 2 or more cycles before the end of the opcode should be
allowed. */
#define OPINFO_DISABLES_IRQ(opinfo) \
((opinfo) & OPINFO_DISABLES_IRQ_MSK)
/* Return nonzero if `opinfo' has changed the I flag from 1 to 0, so that an
IRQ that happened 2 or more cycles before the end of the opcode should not
be allowed. */
#define OPINFO_ENABLES_IRQ(opinfo) \
((opinfo) & OPINFO_ENABLES_IRQ_MSK)
/* Set the information for `opinfo'. `number' is the opcode number,
`delays_interrupt' must be non-zero if it causes a 1-cycle interrupt
delay, `disables_interrupts' must be non-zero if it disabled IRQs. */
#define OPINFO_SET(opinfo, \
number, delays_interrupt, disables_irq, enables_irq) \
((opinfo) = ((number) \
| ((delays_interrupt) ? OPINFO_DELAYS_INTERRUPT_MSK : 0) \
| ((disables_irq) ? OPINFO_DISABLES_IRQ_MSK : 0) \
| ((enables_irq) ? OPINFO_ENABLES_IRQ_MSK : 0)))
/* Set whether the opcode causes the 1-cycle interrupt delay according to
`delay'. */
#define OPINFO_SET_DELAYS_INTERRUPT(opinfo, delay) \
do { \
if ((delay)) \
(opinfo) |= OPINFO_DELAYS_INTERRUPT_MSK; \
} while (0)
/* Set whether the opcode disables previously enabled IRQs according to
`disable'. */
#define OPINFO_SET_DISABLES_IRQ(opinfo, disable) \
do { \
if ((disable)) \
(opinfo) |= OPINFO_DISABLES_IRQ_MSK; \
} while (0)
/* Set whether the opcode enables previously disabled IRQs according to
`enable'. */
#define OPINFO_SET_ENABLES_IRQ(opinfo, enable) \
do { \
if ((enable)) \
(opinfo) |= OPINFO_ENABLES_IRQ_MSK; \
} while (0)
#endif