mirror of
https://github.com/AppleWin/AppleWin.git
synced 2024-10-01 19:56:21 +00:00
58 lines
2.7 KiB
Plaintext
58 lines
2.7 KiB
Plaintext
** *Uthernet ethernet emulation setup instructions. ***
|
|
|
|
March 19 2006 - R. Glenn Jones
|
|
|
|
To enable Ethernet support in Applewin you must first download and
|
|
install Winpcap.
|
|
|
|
An Alternative to downloading winpcap is to get the Ethereal package which
|
|
includes winpcap along with Ethereal network analyzer code. To use Ethereal to
|
|
capture traffic (other then your own) you must be plugged into a shared hub vs a
|
|
switch. If you plan on doing any network programming ethereal is a definite must
|
|
have.
|
|
|
|
Winpcap: http://www.winpcap.org/install/default.htm or Ethereal: http://www.ethereal.com/download.html
|
|
|
|
After Applewin starts, select the settings ICON and then select the Ethernet settings button.
|
|
|
|
Uthernet will be disabled. Select Uthernet from the list of available
|
|
ethernet emulations (currently the only one).
|
|
|
|
Select the ethernet interface you want to work with. This must be a physical ethernet interface.
|
|
|
|
If you have more then one interface you may need to select them in turn
|
|
in order to get the text description for each interface vs what winpcap
|
|
likes to use for a reference. Select Ok. and then close Applewin.
|
|
*Note:* Wireless does not work with winpcap.
|
|
|
|
NOTE: Due to a current limitation you must exit Applewin and re-run
|
|
Applewin for 'a' ethernet interface change to take effect.
|
|
|
|
In order to test the Ethernet emulation out you should grab a copy of Contiki for the Apple II here
|
|
|
|
http://www.a2retrosystems.com/downloads.htm
|
|
|
|
Grab the 80 Col. Primary Disk and Supplementary Disk images if using Apple //e emulation or the 40 Col
|
|
versions if running Apple II+ emulation. You should also grab a copy of the Uthernet/Contiki getting
|
|
started guide http://www.a2retrosystems.com/a2UtherManual.pdf
|
|
|
|
When you run applewin again, select the contiki80pri.dsk image. Boot AppleWin.
|
|
|
|
Once Contiki is loaded then press Enter to clear the welcome screen and press ESC for a menu.
|
|
|
|
Choose Directory Application and then select configuration edit program. Tab down to the Slot param
|
|
and change it to '3'. The emulation only works in slot 3.
|
|
|
|
If you do not have DHCP support in your local Lan then setup your static IP address information here as well. Save and exit.
|
|
|
|
If you have DHCP support in your local lan then press ESC and choose Directory Application again, and then select DHCP client.
|
|
|
|
Hit eneter on request Address and you should see the IP information updated. Close the window and then press ESC again.
|
|
|
|
Select the web browser and hit Enter a couple of times.
|
|
Adam Dunkels web site should show up if things are working properly.
|
|
|
|
Try a few other web sites if the first one isn't working in case it is temporarily down.
|
|
You may also need to configure/disable your firewall if you are having problems.
|
|
|
|
Glenn |