ciderpress/nufxlib/Bzip2.c

300 lines
8.7 KiB
C
Raw Normal View History

Large set of changes to restore CiderPress build. CiderPress and MDC now compile, and execute far enough to open their respective "about" boxes, but I doubt they'll do much more than that. * Switch from MBCS to UNICODE APIs Microsoft switched to UTF-16 (by way of UCS-2) a long time ago, and the support for MBCS seems to be getting phased out. So it's time to switch to wide strings. This is a bit awkward for CiderPress because it works with disk and file archives with 8-bit filenames, and I want NufxLib and DiskImgLib to continue to work on Linux (which has largely taken the UTF-8 approach to Unicode). The libraries will continue to work with 8-bit filenames, with CiderPress/MDC doing the conversion at the appropriate point. There were a couple of places where strings from a structure handed back by one of the libraries were used directly in the UI, or vice-versa, which is a problem because we have nowhere to store the result of the conversion. These currently have fixed place-holder "xyzzy" strings. All UI strings are now wide. Various format strings now use "%ls" and "%hs" to explicitly specify wide and narrow. This doesn't play well with gcc, so only the Windows-specific parts use those. * Various updates to vcxproj files The project-file conversion had some cruft that is now largely gone. The build now has a common output directory for the EXEs and libraries, avoiding the old post-build copy steps. * Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots The old "prebuilts" directory is now gone. The libraries are now built as part of building the apps. I added a minimal set of files for zlib, and a full set for nufxlib. The Linux-specific nufxlib goodies are included for the benefit of the Linux utilities, which are currently broken (don't build). * Replace symbols used for include guards Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
/*
* NuFX archive manipulation library
* Copyright (C) 2000-2007 by Andy McFadden, All Rights Reserved.
* This is free software; you can redistribute it and/or modify it under the
* terms of the BSD License, see the file COPYING-LIB.
*
* Support for the "bzip2" (BTW+Huffman) algorithm, via "libbz2".
*
* This compression format is totally unsupported on the Apple II. This
* is provided primarily for the benefit of Apple II emulators that want
* a better storage format for disk images than SHK+LZW or a ZIP file.
*
* This code was developed and tested with libz2 version 1.0.2. Visit
* http://sources.redhat.com/bzip2/ for more information.
*/
#include "NufxLibPriv.h"
#ifdef ENABLE_BZIP2
#include "bzlib.h"
#define kBZBlockSize 8 /* use 800K blocks */
#define kBZVerbosity 1 /* library verbosity level (0-4) */
/*
* Alloc and free functions provided to libbz2.
*/
static void*
Nu_bzalloc(void* opaque, int items, int size)
{
return Nu_Malloc(opaque, items * size);
}
static void
Nu_bzfree(void* opaque, void* address)
{
Nu_Free(opaque, address);
}
/*
* ===========================================================================
* Compression
* ===========================================================================
*/
/*
* Compress "srcLen" bytes from "pStraw" to "fp".
*/
NuError
Nu_CompressBzip2(NuArchive* pArchive, NuStraw* pStraw, FILE* fp,
ulong srcLen, ulong* pDstLen, ushort* pCrc)
{
NuError err = kNuErrNone;
bz_stream bzstream;
int bzerr;
uchar* outbuf = nil;
Assert(pArchive != nil);
Assert(pStraw != nil);
Assert(fp != nil);
Assert(srcLen > 0);
Assert(pDstLen != nil);
Assert(pCrc != nil);
err = Nu_AllocCompressionBufferIFN(pArchive);
if (err != kNuErrNone)
return err;
/* allocate a similarly-sized buffer for the output */
outbuf = Nu_Malloc(pArchive, kNuGenCompBufSize);
BailAlloc(outbuf);
/*
* Initialize the bz2lib stream.
*/
bzstream.bzalloc = Nu_bzalloc;
bzstream.bzfree = Nu_bzfree;
bzstream.opaque = pArchive;
bzstream.next_in = nil;
bzstream.avail_in = 0;
bzstream.next_out = outbuf;
bzstream.avail_out = kNuGenCompBufSize;
/* fourth arg is "workFactor"; set to zero for default (30) */
bzerr = BZ2_bzCompressInit(&bzstream, kBZBlockSize, kBZVerbosity, 0);
if (bzerr != BZ_OK) {
err = kNuErrInternal;
if (bzerr == BZ_CONFIG_ERROR) {
Nu_ReportError(NU_BLOB, err, "error configuring bz2lib");
} else {
Nu_ReportError(NU_BLOB, err,
"call to BZ2_bzCompressInit failed (bzerr=%d)", bzerr);
}
goto bail;
}
/*
* Loop while we have data.
*/
do {
ulong getSize;
int action;
/* should be able to read a full buffer every time */
if (bzstream.avail_in == 0 && srcLen) {
getSize = (srcLen > kNuGenCompBufSize) ? kNuGenCompBufSize : srcLen;
DBUG(("+++ reading %ld bytes\n", getSize));
err = Nu_StrawRead(pArchive, pStraw, pArchive->compBuf, getSize);
if (err != kNuErrNone) {
Nu_ReportError(NU_BLOB, err, "bzip2 read failed");
goto bz_bail;
}
srcLen -= getSize;
*pCrc = Nu_CalcCRC16(*pCrc, pArchive->compBuf, getSize);
bzstream.next_in = pArchive->compBuf;
bzstream.avail_in = getSize;
}
if (srcLen == 0)
action = BZ_FINISH; /* tell libbz2 that we're done */
else
action = BZ_RUN; /* more to come! */
bzerr = BZ2_bzCompress(&bzstream, action);
if (bzerr != BZ_RUN_OK && bzerr != BZ_FINISH_OK && bzerr != BZ_STREAM_END)
{
err = kNuErrInternal;
Nu_ReportError(NU_BLOB, err,
"libbz2 compress call failed (bzerr=%d)", bzerr);
goto bz_bail;
}
/* write when we're full or when we're done */
if (bzstream.avail_out == 0 ||
(bzerr == BZ_STREAM_END && bzstream.avail_out != kNuGenCompBufSize))
{
DBUG(("+++ writing %d bytes\n",
(uchar*)bzstream.next_out - outbuf));
err = Nu_FWrite(fp, outbuf, (uchar*)bzstream.next_out - outbuf);
if (err != kNuErrNone) {
Nu_ReportError(NU_BLOB, err, "fwrite failed in bzip2");
goto bz_bail;
}
bzstream.next_out = outbuf;
bzstream.avail_out = kNuGenCompBufSize;
}
} while (bzerr != BZ_STREAM_END);
*pDstLen = bzstream.total_out_lo32;
Assert(bzstream.total_out_hi32 == 0); /* no huge files for us */
bz_bail:
BZ2_bzCompressEnd(&bzstream); /* free up any allocated structures */
bail:
if (outbuf != nil)
free(outbuf);
return err;
}
/*
* ===========================================================================
* Expansion
* ===========================================================================
*/
/*
* Expand from "infp" to "pFunnel".
*/
NuError
Nu_ExpandBzip2(NuArchive* pArchive, const NuRecord* pRecord,
const NuThread* pThread, FILE* infp, NuFunnel* pFunnel, ushort* pCrc)
{
NuError err = kNuErrNone;
bz_stream bzstream;
int bzerr;
ulong compRemaining;
uchar* outbuf;
Assert(pArchive != nil);
Assert(pThread != nil);
Assert(infp != nil);
Assert(pFunnel != nil);
err = Nu_AllocCompressionBufferIFN(pArchive);
if (err != kNuErrNone)
return err;
/* allocate a similarly-sized buffer for the output */
outbuf = Nu_Malloc(pArchive, kNuGenCompBufSize);
BailAlloc(outbuf);
compRemaining = pThread->thCompThreadEOF;
/*
* Initialize the libbz2 stream.
*/
bzstream.bzalloc = Nu_bzalloc;
bzstream.bzfree = Nu_bzfree;
bzstream.opaque = pArchive;
bzstream.next_in = nil;
bzstream.avail_in = 0;
bzstream.next_out = outbuf;
bzstream.avail_out = kNuGenCompBufSize;
/* third arg is "small" (set nonzero to reduce mem) */
bzerr = BZ2_bzDecompressInit(&bzstream, kBZVerbosity, 0);
if (bzerr != BZ_OK) {
err = kNuErrInternal;
if (bzerr == BZ_CONFIG_ERROR) {
Nu_ReportError(NU_BLOB, err, "error configuring libbz2");
} else {
Nu_ReportError(NU_BLOB, err,
"call to BZ2_bzDecompressInit failed (bzerr=%d)", bzerr);
}
goto bail;
}
/*
* Loop while we have data.
*/
do {
ulong getSize;
/* read as much as we can */
if (bzstream.avail_in == 0) {
getSize = (compRemaining > kNuGenCompBufSize) ?
kNuGenCompBufSize : compRemaining;
DBUG(("+++ reading %ld bytes (%ld left)\n", getSize,
compRemaining));
err = Nu_FRead(infp, pArchive->compBuf, getSize);
if (err != kNuErrNone) {
Nu_ReportError(NU_BLOB, err, "bzip2 read failed");
goto bz_bail;
}
compRemaining -= getSize;
bzstream.next_in = pArchive->compBuf;
bzstream.avail_in = getSize;
}
/* uncompress the data */
bzerr = BZ2_bzDecompress(&bzstream);
if (bzerr != BZ_OK && bzerr != BZ_STREAM_END) {
err = kNuErrInternal;
Nu_ReportError(NU_BLOB, err,
"libbz2 decompress call failed (bzerr=%d)", bzerr);
goto bz_bail;
}
/* write every time there's anything (buffer will usually be full) */
if (bzstream.avail_out != kNuGenCompBufSize) {
DBUG(("+++ writing %d bytes\n",(uchar*)bzstream.next_out - outbuf));
err = Nu_FunnelWrite(pArchive, pFunnel, outbuf,
(uchar*)bzstream.next_out - outbuf);
if (err != kNuErrNone) {
Nu_ReportError(NU_BLOB, err, "write failed in bzip2");
goto bz_bail;
}
if (pCrc != nil)
*pCrc = Nu_CalcCRC16(*pCrc, outbuf,
(uchar*) bzstream.next_out - outbuf);
bzstream.next_out = outbuf;
bzstream.avail_out = kNuGenCompBufSize;
}
} while (bzerr == BZ_OK);
Assert(bzerr == BZ_STREAM_END); /* other errors should've been caught */
Assert(bzstream.total_out_hi32 == 0); /* no huge files for us */
if (bzstream.total_out_lo32 != pThread->actualThreadEOF) {
err = kNuErrBadData;
Nu_ReportError(NU_BLOB, err,
"size mismatch on expanded bzip2 file (%d vs %ld)",
bzstream.total_out_lo32, pThread->actualThreadEOF);
goto bz_bail;
}
bz_bail:
BZ2_bzDecompressEnd(&bzstream); /* free up any allocated structures */
bail:
if (outbuf != nil)
free(outbuf);
return err;
}
#endif /*ENABLE_BZIP2*/