Commit Graph

129 Commits

Author SHA1 Message Date
Andy McFadden
a250f6d89a Disable logging in non-debug builds
Ideally there would be a preference that allowed you to enable
logging and specify the file's location.  That could make remote
debugging of certain problems easier.
2015-01-22 10:06:55 -08:00
Andy McFadden
5498a4e835 Handle carriage returns in REM statements
With a bit of hex-editing it's possible to embed carriage returns
in REM statements.  The reformatter wasn't handling that well.  The
new output matches what LIST generates.

The output generated cannot be imported by the text-to-BASIC
importer because it doesn't understand the blank lines.  The output
generated before this change didn't work either, though that was a
bit harder to figure out because the CRs are harder to see in Windows
than CRLF.

It should be possible to teach the importer to handle such files,
though I think these files are pretty rare -- I happened to find
them in some Peter Watson freeware.
2015-01-21 13:40:28 -08:00
Andy McFadden
a2c15eee55 Another file open tweak
We can report a better error message for cases where the NuFX
archive master header is intact but something else is damaged.
2015-01-19 17:38:03 -08:00
Andy McFadden
b727e8ca81 Set version to 4.0.0 RC1 2015-01-19 16:58:14 -08:00
Andy McFadden
357aba39ec Fix file viewer position for tall SHR images
The images in Paintworks PNT files are 2x the height of the SHR
screen.  The rich edit control was ending up scrolled to the bottom
of the image, which is bad because many of the image files don't
really have anything interesting in the bottom half.  This shifts
the position back to the top.

Also, some minor source code touch-ups.
2015-01-16 15:15:40 -08:00
Andy McFadden
61c4069031 Fine-tune file viewer size
The height was supposed to be just tall enough to fit a Super
Hi-Res graphic without needing to scroll, but it had become too
short by about 6 pixels.

The width was supposed to be wide enough to exactly fit 80-column
text, but the optional scroll bar ate two columns when it appeared.
We now over-size the viewer so it looks right when the scroll bar
appears.
2015-01-15 16:24:40 -08:00
Andy McFadden
06eeabc8a4 Switch to system font
Switch the remaining dialogs to the system font.  This required
minor adjustments in a couple of places.

Also, remove the remnants of the ChooseDir dialog.
2015-01-15 16:10:08 -08:00
Andy McFadden
829e275b23 Tweak "open file" behavior
For a file with ".shk" extension, prioritize disk image over NuFX
file archive.  The disk image code won't accept it if it has more
than one entry, and it's pretty rare for somebody to want to open
a single-disk archive in file mode.

Ideally all single-disk archives are named ".sdk", but there's
probably a lot that are just named ".shk", so this will probably
be more convenient.
2015-01-15 15:45:31 -08:00
Andy McFadden
b5169033a1 Update progress dialogs
Do the Mac OS Roman conversion in a couple of places.  Fix the
NuFX extraction progress, which got all blinky after the wide char
update.
2015-01-15 15:35:34 -08:00
Andy McFadden
650434f06b Update fonts in MDC dialogs
The About box needed some adjusting -- apparently the 10-point MS
Shell Dlg doesn't have the same metrics as the 10-point MS Sans
Serif.
2015-01-15 14:26:39 -08:00
Andy McFadden
0861b7ead4 Simplify 2015-01-15 14:21:01 -08:00
Andy McFadden
8c34eb1213 Volume name and font fixes
More volume name MOR conversions.  I think I got them all.

This also switches the "archive info", "add files", and "extract
files" dialogs to use the System Font.  We were using "MS Sans
Serif" before, which looks a bit ratty on Windows 7 because it
doesn't take advantage of ClearType.  (Apparently the ClearType
version is "Microsoft Sans Serif", though when you set the "use
system font" boolean to true it changes the font name to "MS Shell
Dlg".)  The old font also seems to be missing certain glyphs, e.g.
my HFS volume name had 'TM' in it, but that just showed up as a box
(which is why, in case you were wondering, these changes ended up
together).

The new font seems to work equally well on WinXP, so I may enable
it for all dialogs in a follow-up change.  As far as I can tell it
has the same font metrics -- I haven't seen anything weird looking
in the dialogs I've updated so far.

Also, bumped the version to 4.0.0-b3.
2015-01-15 11:35:48 -08:00
Andy McFadden
87a7411dda Unicode conversion for volume name in volume copier
We needed to convert the volume name correctly for the volume list
and the progress dialogs when copying to or from a file.  This
shouldn't affect how anything works, but it looks nicer with HFS
volumes that have non-ASCII characters.
2015-01-15 10:48:35 -08:00
Andy McFadden
bb24f51ccb Fix subvol charset handling
We weren't doing a MOR-to-UNI conversion on the sub-volume name, so
HFS volumes with non-ASCII characters didn't look right.

This also relocates the character-conversion code to a new source
file.  It's currently part of the reformat lib, though it arguably
belongs in util (but that would introduce a new dependency
between reformat and util).
2015-01-15 10:34:45 -08:00
Andy McFadden
591eef6882 Update README.md 2015-01-14 17:02:14 -08:00
Andy McFadden
6f8c269b48 Added a couple more items to "trouble spots" 2015-01-14 14:06:55 -08:00
Andy McFadden
da1050fab6 Prep for beta2 release 2015-01-14 13:31:57 -08:00
Andy McFadden
f6601161fe Add outline and shadow to IIgs doc conversion
RTF includes outline and shadow styles, but for some reason
CiderPress wasn't generating them.  They don't appear in the Rich
Text Edit file viewer, but if you extract the file and open it with
Microsoft Word you can see the text in all its glory.
2015-01-14 12:22:50 -08:00
Andy McFadden
cc93d4ab92 File open tweaks
- Remove *.* from AppleSingle filter spec, since "all files" now
  works just fine.
- Make "all files" the default if nothing is configured.
2015-01-13 22:14:07 -08:00
Andy McFadden
b40054bf26 Minor help file updates
Added AppleSingle note to "archive info" help page.
Added a missing pop-up help entry.
Added a README with instructions for regenerating help.
2015-01-13 17:47:57 -08:00
Andy McFadden
e7e2459e5e Add Gutenberg to ImageFormatDialog pop-up
Used for "confirm disk image format".
2015-01-13 17:11:22 -08:00
Andy McFadden
a2962e976f Handle cancellation
Don't show an error if the user has "confirm disk image format"
selected and cancels out of the dialog.
2015-01-13 16:48:08 -08:00
Andy McFadden
814872966e Rewrote "open archive" logic
The previous code was a stickler for only opening files whose type
matched what was selected in the filter pop-up.  The original goal
was to allow you to choose whether a BXY or SDK file was interpreted
as Binary II, ShrinkIt, or disk image, since they could go either
way.  Unfortunately, its refusal to consider types other than what
was selected made it kind of annoying.

The new code will start by trying to open the file with the selected
filter, so that it's still possible to choose how SDK and BXY files
are opened.  However, it now continues on, trying all other types
before finally giving up.

If the generic ("*.*") filter is selected, CiderPress will start by
trying to open the file as a disk image.

This seems to produce good results with a variety of known and
unknown files.
2015-01-13 15:54:10 -08:00
Andy McFadden
432b1c4cc6 Fix overwrite dialog
Was setting the original pathname improperly, so when attempting
to add a file to a NuFX archive the "do you want to overwrite
existing entry?" dialog contained gibberish.
2015-01-13 15:47:18 -08:00
Andy McFadden
1d6736fd92 Add "future trouble spots" section 2015-01-13 14:10:39 -08:00
Andy McFadden
b3780261c4 Minor tweaks 2015-01-13 13:43:48 -08:00
Andy McFadden
ed2d16a016 Nudge 2015-01-13 13:28:02 -08:00
Andy McFadden
fd37bfd261 Reimplement ChooseDirDialog
The previous version was written to work on Win98+, and used the
rather gnarly ShellTree class.  Since we no longer support Win98,
we can now use CShellManager::BrowseForFolder(), which does exactly
what we want without all the ugly code (and it looks nicer, and it
integrates better with the rest of the system).

We can also get rid of NewFolderDialog, which only existed to allow
the user to create a folder when trudging through ShellTree.

This required "upgrading" the main app object from CWinApp to
CWinAppEx, but that appears to be benign.  Tested on WinXP and it
all seems fine.
2015-01-13 13:25:34 -08:00
Andy McFadden
7cd92a7fdd Version bump to 4.0.0b1 2015-01-12 18:18:28 -08:00
Andy McFadden
b409d613fa Placate EOL hobgoblins 2015-01-12 18:06:38 -08:00
Andy McFadden
5946481b4e Add AppleSingle support
This handles version 1 and 2, and copes with the broken files
created by the Mac OS X "applesingle" command-line tool (which is
unable to decode the broken files it creates).

I get the sense that many AppleSingle files don't end with ".AS", so
the filespec includes "*.*" as well.

Some AppleSingle files don't include a filename.  In that case, we
use the file's name as the entry name, minus any ".as" extension.
The current implementation doesn't convert from Unicode to Mac OS
Roman, so non-ASCII characters are mishandled unless the file was
generated by GS/ShrinkIt.  (We assume version 1 AppleSingle files
use MOR name strings.)

Also, version bump to 4.0.0d3.
2015-01-12 17:49:59 -08:00
Andy McFadden
84ba460957 Minor cleanup 2015-01-11 16:11:44 -08:00
Andy McFadden
0d5bfa593f Don't enable fields when archive is read-only
"Edit attributes" on a read-only archive was enabling the file and
aux type fields inappropriately as part of the ProDOS vs. HFS file
type handling.
2015-01-11 15:50:55 -08:00
Andy McFadden
900b4c7757 Address gcc complaint 2015-01-09 22:28:41 -08:00
Andy McFadden
3d3c19d67f Fixes for Gutenberg, Jr. disks
Also added some observations about the file format.
2015-01-09 22:25:14 -08:00
Andy McFadden
125d128b36 Show Gutenberg files as "Gutenb" in the content list 2015-01-09 18:36:05 -08:00
Andy McFadden
1362c73a7e Gutenberg tweaks
Changed the catalog scan offset so we don't overrun the buffer.

Changed a strcpy() to strncpy().

Added Gutenberg to the list of formats MDC outputs.
2015-01-09 18:24:09 -08:00
Andy McFadden
090797a76f Change tabs to spaces, use Linux EOL
No substantative changes (unless the tabs-to-spaces messed
something up).
2015-01-09 17:52:16 -08:00
Andy McFadden
683eb05a82 Change sprintf() to snprintf() 2015-01-09 17:49:27 -08:00
Andy McFadden
b95575595f Merge in NufxLib v3.0.0 changes
A couple of minor fix-ups for the NufxLib snapshot.
2015-01-09 16:58:13 -08:00
Andy McFadden
b97584eeb6 Update Linux build
Fix some %ld message in log messages, and update the Linux sample
code to match recent changes in NufxLib and DiskImgLib.

Also, bump MDC version to 3.0.0 to match Windows version.
2015-01-08 18:27:09 -08:00
Andy McFadden
e620d054bb It's not Win9x
Changed the two IsWin9x() functions to always return false.

Eventually we'll want to roll this up, removing the Win9x branch
of the code that called these.
2015-01-08 18:04:09 -08:00
Andy McFadden
00e6b3ab5e Improve filename handling when reading from archives
This updates GenericEntry's filename handling to be more careful
about Mac OS Roman vs. Unicode.  Most of the work is still done with
a CP-1252 conversion instead of MOR, but we now do a proper
conversion on the "display name", so we see the right thing in the
content list and file viewer.

Copy & paste, disk-to-file-archive, and file-archive-to-disk
conversions should work (correctly) as before.  Extracted files will
still have "_" or "%AA" instead of a Unicode TRADE MARK SIGN, but
that's fine for now -- we can extract and re-add the files losslessly.

The filenames are now stored in CStrings rather than WCHAR*.

Also, fixed a bad initializer in the file-archive-to-disk conversion
dialog.
2015-01-08 17:57:20 -08:00
Andy McFadden
b79498da50 Improve filename handling when adding files
Most of this change is a conversion of the old FileDetails struct
into a new LocalFileDetails class.  The new class keeps the
members private, and keeps the Unicode and MOR representations of
the string separate.

The NuFX and DiskImg libraries don't support UTF-16 filenames,
so we stil can't add files with non-CP-1252 filenames, but we're
a step closer.

Also, update NufxLib with a couple of fixes from the main project.

Also, fix handling of "%00" when adding files.

Also, mark most of the A2FileDOS fields private.  Not sure why
they weren't.
2015-01-08 14:16:20 -08:00
Andy McFadden
d94b707489 Use more integers with explicit widths
Updated some structs and a few DiskImg APIs, primarily file type,
aux type, and access flags.
2015-01-04 18:20:59 -08:00
Andy McFadden
84706d7ea4 Update NufxLib snapshot to v3.0.0d2
This integrates the latest NufxLib sources, and updates CiderPress
to work with the API changes.
2015-01-04 11:29:51 -08:00
Andy McFadden
e7512f5f07 Tweak AWGS/Teach output
Officially the \u value is signed 16-bit decimal, but we were treating
it as unsigned.  The Windows parsers handled it anyway, but it's best
to do what the spec says.
2014-12-18 18:35:30 -08:00
Andy McFadden
4dd0c9339d Quick stab at Unicode for AWGS/Teach
This tweaks the output for AWGS and Teach Text to convert from Mac
OS Roman to Unicode, rather than Windows code page 1252.

It would be slightly more efficient (and possibly a bit more legible
in the RTF file) if we left the "good" conversions alone, e.g.
continue to use the CP1252 character for "E with acute", instead of
converting to U+00C9.  That might leave us at the mercy of the code
page converter in some random RTF reader, though, so it's probably
best to just use the official Unicode values.
2014-12-18 17:33:09 -08:00
Andy McFadden
13c38be4aa Tweak error reporting 2014-12-17 15:45:28 -08:00
Andy McFadden
7b70767a1f Better error message when extracting files
The file extraction dialog allows you to select file parts, so you
can choose to exclude resource forks or just extract disk images.  If
you don't choose any parts, nothing will extract, and you get a
confusingly generic message about nothing matching the criteria.

This adds a specific error message for the case where no parts are
selected.
2014-12-17 13:31:50 -08:00