<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 4.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>CiderPress Hardware Compatibility</title>
</head>
<body bgcolor="#FFFFFF" text="#000000">
<h1>CiderPress Hardware Compatibility</h1>
<p>CiderPress can access floppy disks, CD-ROMs, CF cards, hard drives, and other
devices. Whether or not it can do so on your system depends on the
specific set of devices you have and what version of Windows you're running.
<a href="index.htm">Return to main page</a>.</p>
<h3>General Rules</h3>
<ul>
<li>3.5" floppy disks
<ul>
<li>Requires a 3.5" floppy drive in your PC. Works under both
Win98/ME and Win2K/XP.</li>
<li>Only 720KB and 1.4MB PC-format floppy disks are supported.
Apple-format 800KB and 1.6MB disks are not, due to hardware
differences. Apple-format 140K 5.25" disks are not supported
either.</li>
</ul>
</li>
<li>CompactFlash (CF) cards
<ul>
<li>Requires a CF card reader.</li>
<li>Your ability to read CF cards in CiderPress depends upon your exact
model of reader and which operating system you're running. Check
the compatibility list, below.</li>
<li>Cards can use CFFA fixed-partition format or the custom partitioning
from SHH Systeme's MicroDrive system.</li>
<li>CiderPress does not
currently provide formatting or partitioning facilities. You must
prepare the card on the Apple II.</li>
</ul>
</li>
<li>CD-ROMs
<ul>
<li>Requires a CD-ROM drive. Internal SCSI and IDE drives have been
tested successfully under Win98/ME and Win2K/XP. External USB
CD-ROM drives may not work.</li>
<li>Works for Macintosh-partitioned CD-ROMs.</li>
<li>CiderPress does not record discs.</li>
</ul>
</li>
<li>Hard drives
<ul>
<li>Requires an appropriate interface to connect the hard drive, e.g. you
need a SCSI adapter in your PC to read a SCSI hard drive.</li>
<li>Under Win2K/XP, the device must be recognized by the BIOS (SCSI or
IDE; FireWire might work but has not been tested).</li>
<li>Under Win98/ME, it must be recognized by ASPI (usually SCSI
only). See Win98/ME notes below.</li>
</ul>
</li>
<li>ZIP drives
<ul>
<li>ZIP disks have been used successfully. Make sure you partition
the disk, e.g. with ADU or RamFAST utilities on the Apple II. If
you insert a blank disk in a IIgs, and let the Finder format it as a
simple ProDOS volume, the disk won't work if you eject and re-insert it.</li>
<li>You may need drivers to use a ZIP drive on a PC. SCSI drives
will probably work without them.</li>
<li>Parallel-port ZIP drives do not work well with CiderPress under
Win9x/ME. You can read from them, but writing fails.</li>
</ul>
</li>
<li>Other devices
<ul>
<li>Insite SCSI "floptical" drives, made popular on the Apple II by
Tulin, have been successfully tested under Win98 and Win2K. No
additional drivers needed on the PC.</li>
<li>Tape drives are not supported.</li>
</ul>
</li>
<li>Win2K/XP
<ul>
<li>You need "administrator" privileges to access devices other
than floppy disk drives. This is a general OS limitation on
low-level access to devices.</li>
</ul>
</li>
<li>Win98/ME
<ul>
<li>Access to CD-ROM drives and hard drives is limited to what your ASPI
layer is capable of handling. "ASPI" is an acronym for
Advanced SCSI Programming Interface, and provides a layer between
applications and SCSI devices. It also provides an interface for
IDE CD-ROM drives, and may work for other devices depending on which
ASPI implementation you have.</li>
<li>Microsoft provides a generic ASPI layer that is commonly replaced when
CD recording software is installed. Adaptec/Roxio provides one
implementation, Ahead's Nero provides another. All of these will
work just fine with CD-ROM drives, but access to other devices may be
affected by the currently installed version.</li>
<li>Your SCSI card must be ASPI-compliant. Nearly all cards
are. Adaptec 2940-series cards have been tested, as have some
older Symbios/LSI Logic cards (e.g. Diamond FirePort).</li>
</ul>
</li>
</ul>
<p>As the saying goes, "your mileage may vary". The only way to
know for certain if something will work is to try it and see.</p>
<h3>CompactFlash Card Reader Compatibility List</h3>
<table border="1" width="100%">
<tr>
<td width="33%"><b>Device</b></td>
<td width="33%"><b>Win2K/XP</b></td>
<td width="34%"><b>Win98/ME</b></td>
</tr>
<tr>
<td width="33%">Lexar Universal Card Reader (USB, model #GS-UFD-20SA-TP)</td>
<td width="33%"><font color="#008000">Works</font>. Card size in Open
Volume dialog is way off.</td>
<td width="34%"><font color="#FF0000">Does not work</font>.</td>
</tr>
<tr>
<td width="33%">SanDisk ImageMate SDDR-31</td>
<td width="33%"><font color="#008000">Works</font>.</td>
<td width="34%"><font color="#000080">Partially working</font>. Data
can be read, but writes only pretend to succeed.</td>
</tr>
<tr>
<td width="33%">ETI card reader (USB, model # unknown)</td>
<td width="33%">(not tested)</td>
<td width="34%"><font color="#000080">Partially working</font>. Data
can be read, but writes fail.</td>
</tr>
<tr>
<td width="33%">SanDisk 6-in-1 reader</td>
<td width="33%"><font color="#008000">Works</font>.</td>
<td width="34%">(not tested)</td>
</tr>
<tr>
<td width="33%">IBM PCMCIA card adapter</td>
<td width="33%"><font color="#008000">Works</font><font color="#000080">.</font></td>
<td width="34%">(not tested)</td>
</tr>
<tr>
<td width="33%">SanDisk CompactFlash PC Card Adapter (model #SDAD-38-A10)</td>
<td width="33%"><font color="#008000">Works</font><font color="#000080">.</font></td>
<td width="34%">(not tested)</td>
</tr>
</table>
<p>One common problem in Win98 is refusal by the CF reader driver to allow
access to unrecognized logical volumes ("logical volumes" are lettered
drives, like "C:"). In such cases, the card will not even show
up in the logical volume list. Win2K and WinXP are usually better about
this.</p>
<p>Depending on your hardware and software configuration, you may be able to
open your card reader by name (e.g. "SanDisk Imagemate II Direct-access
device"), rather than drive letter. In this case
you're actually using the ASPI layer to access the device, which is a little
strange since CF card readers aren't SCSI and don't work like CD-ROM
drives. This does appear to work for reading, but fails for writing.
Depending on which ASPI implementation you have installed, writes may be
rejected or may appear to succeed but not actually go through.</p>
<p>Thus far, no fully-functioning CF configuration for Win98/ME has been found.</p>
</body>
</html>