mirror of
https://github.com/digarok/gsplus.git
synced 2024-06-14 18:29:40 +00:00
36 lines
1.2 KiB
Plaintext
36 lines
1.2 KiB
Plaintext
Networking
|
|
----------
|
|
|
|
GS+ can emulate an Uthernet (the original) card in slot 3. Marinetti is supported with the Uthernet Link Layer. Version 1.0.2 or newer is recommended.
|
|
|
|
Configuration:
|
|
|
|
In the settings menu, select Ethernet Card Configuration.
|
|
|
|
Make sure Uthernet Card in Slot 3 is set to On.
|
|
|
|
Select the Interface menu to choose the selected interface from a menu.
|
|
|
|
Win32:
|
|
|
|
Ethernet support uses Winpcap or its modern successor, npcap. You need to install them.
|
|
|
|
Winpcap/npcap require a hardwired ethernet connection in promiscuous mode -- they work by tapping into the ethernet stream.
|
|
|
|
Interface names are not particularly meaningful. Sorry. Run `getmac /v` from cmd.exe to get a human friendly name for the interface device.
|
|
|
|
In marinetti, hardcode the ip address, gateway, and dns servers.
|
|
|
|
OS X:
|
|
|
|
Ethernet support uses the vmnet framework. This provides a virtual ethernet device, dhcp server, and dns server, all bridged to the Macintosh's network.
|
|
|
|
Unfortunately, vmnet requires root permissions or a codesigning entitlment which may only valid for applications through the Mac App Store.
|
|
|
|
In marinetti, use DHCP.
|
|
|
|
Linux:
|
|
|
|
Ethernet support uses the tap ethernet device. This require setting up the device and bridging it to your local network.
|
|
|