mirror of
https://github.com/david-schmidt/gsport.git
synced 2024-06-25 19:29:36 +00:00
71 lines
3.2 KiB
Plaintext
71 lines
3.2 KiB
Plaintext
-----
|
|
GSport Ethernet
|
|
-----
|
|
David Schmidt (david__schmidt at users dot souceforge dot net)
|
|
-----
|
|
|
|
GSport Emulated Ethernet
|
|
|
|
The Uthernet (TFE) support in GSport was made possible by implementing the GPL source written by Spiro Trikaliotis for the {{{http://www.viceteam.org/}Vice emulator}}.
|
|
This version of GSport contains the latest code from VICE 2.2.
|
|
|
|
* Details
|
|
|
|
Right now Uthernet emulation only works under Windows.
|
|
Support for emulation under OS X and Linux is planned.
|
|
In order to use Uthernet emulation, you must install {{{http://www.WinPcap.org/install/default.html}WinPCap}} and
|
|
have a wired (not wireless) Ethernet connection on the host computer.
|
|
|
|
* GSport Setup
|
|
|
|
After GSport starts, press F4 to enter the text based menu and select the "Ethernet Card Configuration" option.
|
|
|
|
By default, Uthernet emulation is turned off. Enable it by setting "Uthernet Card in Slot 3" to "On".
|
|
|
|
Next, select the host interface you wish to use to communicate with the outside world. A list of available
|
|
interfaces is provided on screen. For most the default of interface "0" is correct.
|
|
|
|
Return back to the main menu and save your configuration for good measure. Due to limitations, you must exit
|
|
and restart GSport for the changes you made to take effect.
|
|
|
|
* GS/OS Setup
|
|
|
|
In order to use TCP/IP connectivity under GS/OS, you have to install the latest version of Marinetti and the
|
|
Uthernet Link Layer.
|
|
|
|
First download and install the latest version of Marinetti 3.0 available at:
|
|
{{{http://www.apple2.org/marinetti/Marinetti3.0b1.SHK}http://www.apple2.org/marinetti/Marinetti3.0b1.SHK}}
|
|
|
|
Then install the latest TCPIP INIT available at:
|
|
{{{http://www.apple2.org/marinetti/TCPIP30b3.SHK}http://www.apple2.org/marinetti/TCPIP30b3.SHK}}
|
|
|
|
Just extract and copy the file to the "System.Setup" folder in your GS/OS system folder, overwriting the existing file
|
|
|
|
Last, install the latest Uthernet Link Layer (1.0.1b5) available at:
|
|
{{{http://www.wannop.info/speccie/uthernetll.bxy}http://www.wannop.info/speccie/uthernetll.bxy}}
|
|
|
|
Just extract and copy the file to the "TCPIP" folder in your GS/OS system folder.
|
|
After copying over all the files, reboot the emulated IIgs. Once at the desktop, bring up the graphical control
|
|
panel available in the Apple menu and double click the "TCP/IP" icon.
|
|
|
|
Click on "Setup Connection..." Select the "Uthernet" link layer from the drop down and then click "Configure..."
|
|
|
|
Set "Lan Slot:" to "3", check off the DHCP option and then click "Save". Click "OK" to leave the setup dialog.
|
|
|
|
You should be able to click "Connect to network" and successfully connect to your TCP/IP netowork.
|
|
From this point on, you are free to run any TCP/IP aware GS/OS applications.
|
|
|
|
The following applications have been tested and seem to work fine:
|
|
|
|
Spectrum Automated File Exchange 2.1.9 (FTP client, use passive mode)
|
|
Telnet application included with Marinetti
|
|
|
|
The following applications have been tested and DO NOT work:
|
|
|
|
Casper web server: It will not serve web pages. This is likely a limitation of WinPCap.
|
|
|
|
* 8-bit Applications
|
|
|
|
Uthernet enabled versions of Contiki and ADTPro work fine with GSport. Other 8-bit software should work fine but
|
|
are untested.
|