These extra bytes are unnecessary after the changes in commit 5871820e0c to make string constants explicitly include their null terminators.
The extra bytes would be generated for code like the following:
int main(void) {
static char *s1 = "abc", *s2 = "def", *s3 = "ghi";
}
The C standards generally allow floating-point operations to be done with extra range and precision, but they require that explicit casts convert to the actual type specified. ORCA/C was not previously doing that.
This patch relies on some new library routines (currently in ORCALib) to do this precision reduction.
This fixes#64.
These instructions can be generated for indirect accesses to quad values, and the optimization can sometimes make those code sequences more efficient (e.g. avoiding unnecessary reloads of Y).
The register optimizer tracks when a register is known to contain the same value as a memory location (direct page or absolute) and does optimizations based on this. But it did not always recognize when this information had become invalid because of a subsequent store to the memory location, so it might perform invalid optimizations. This patch adds those checks.
This fixes#66.
Specifically, it converted PLX followed by PHA to STA 1,S. This is invalid if the x value is actually used, which is a case that can come up in the code now generated for the % operator.
It might be possible to re-enable this optimization with tighter checks about where it's applied, but I don't think it's terribly important.
The below program demonstrates an example that was being miscompiled:
#pragma optimize -1
#include <stdio.h>
int main(void) {
int a = 100, b = 200, c = 3, d = 4;
printf("%i\n", (a+b) % (c+d)); /* should be 6 */
}
Per the C standards, the % operator should give a remainder after division, such that (a/b)*b + a%b equals a (provided that a/b is representable). As such, the operation of % is defined for cases where either or both of the operands are negative. Since division truncates toward 0, a%b should give a negative result (or 0) in cases where a is negative.
Previously, the % operator was essentially behaving like the "mod" operator in Pascal, which is equivalent for positive operands but not if either operand is negative. It would generally give incorrect results in those cases, or in some cases give compile-time or run-time errors.
This patch addresses both 16-bit and 32-bit signed computations at run time, and operations in constant expressions. The approach at run time is to call existing division routines, which return the correct remainder, except always as a positive number. The generated code checks the sign of the first operand, and if it is negative negates the remainder.
The code generated is somewhat large (especially for the 32-bit case), so it might be sensible to put it in a library function and call that, but for now it's just generated in-line. This avoids introducing a dependency on a new library function, so the generated code remains compatible with older versions of ORCALib (e.g. the GNO one).
Fixes#10.
This could occur due to the new native-code peephole optimizations for stz instructions, which can collapse consecutive identical ones down to one instruction. This is OK most of the time, but not when dealing with volatile variables, so disable it in that case.
The following test case shows the issue (look at the generated code):
#pragma optimize -1
volatile int a;
int main(void) {
a = 0;
a = 0;
}
This could happen in native-code peephole optimization if two stz instructions targeting different global/static locations occurred consecutively.
This was a regression introduced by commit a3170ea7.
The following program demonstrates the problem:
#pragma optimize 1+2+8+64
int i,j=1;
int main (void) {
i = 0;
j = 0;
return j; /* should return 0 */
}
This allows functions that require an OMF segment byte count of up to 128K to be compiled, although the length in memory at run time is still limited to 64K. (The OMF segment byte count is usually larger, due to the size of relocation records, etc.)
This is useful for compiling large functions, e.g. the main interpreter loop in git. It also fixes the bug shown in the compca23 test case, where functions that require a segment of over 64K may appear to compile correctly but generate corrupted OMF segment headers. This related to tracking sizes with 16-bit values that could roll over.
This patch increases the memory needed at run time by 64K. This shouldn’t generally be a problem on systems with sufficient memory, although it does increase the minimum memory requirement a bit. If behavior in low-memory configurations is a concern, buffSize could be made into a run-time option.
This would occur if ORCA/C remained in memory and was restarted after a previous execution, because the 'pc' value was not reinitialized. The ORCA linker seems to ignore the too-long segment length value, but ORCA/C should generate a correct value that actually corresponds to the length of the segment.
The issue was that 16-bit absolute addressing (in the data bank) was being used to access the data to compare, but with the large memory model the static arrays or structs are not necessarily in the same bank, so absolute long addressing should be used.
This was sometimes causing failures in the C4.6.4.1.CC and C4.6.6.1.CC conformance tests in the ORCA/C test suite.
The following program often demonstrates the problem (depending on memory layout and contents):
#pragma memorymodel 1
#pragma optimize 1
#include <stdio.h>
int i;
char ch1[32000];
long L1[1];
int main (void)
{
if (L1 [0] != 0)
printf("%li\n", L1[0]); /* shouldn't print */
/* buggy behavior can happen if the bank bytes of these pointers differ */
printf("%p %p\n", &L1[0], &i);
}
This could cause problems when asm blocks contained instructions that the ORCA/C native code optimizer didn’t know about, as in the example below. It might also be possible to trigger this bug without asm blocks (particularly with the large memory model), but I haven’t run into a case that does.
The new approach conservatively assumes that unknown instructions block the optimization. This should be equivalent to the old code with respect to the instructions defined in CGI.pas, except that m_bit_imm should have been treated as blocking the optimization but was not. There are still some other potential problem cases with applying this lda-elimination optimization to arbitrary assembly code, but fixing them might interfere with the optimization in useful cases, so I’m leaving those alone for now.
Here is an example of a program with an asm block affected by this problem:
#pragma optimize 74
int x,y;
/* should print 2 when invoked with argc==1 */
int main(int argc, char **argv)
{
x = argc;
y = argc + 6;
asm {
lda #1
pha
eor >x
bne done
inc argc
done: pla
}
printf("%i\n", argc);
}
This generated invalid code in instances like the following. The code generated for "s = s->u.next" would update the most significant word of s first, then use an indirect load with the half-updated pointer value to update the least significant word of s. This would generally corrupt the result if the new and old pointers had different bank bytes.
#pragma optimize 79
#include <stdio.h>
struct S {
int i;
union {
struct S * next;
} u;
} s1 = {0, 0};
int main (void)
{
struct S * s = &s1;
s = s->u.next;
if (s != 0)
puts("compiler bug detected\n"); /* May not always be triggered, depending on memory contents. */
}
Previously, such initializations would sometimes generate a garbage value pointing up to 65535 bytes beyond the start of the string constant. (This was due to a lack of sign-extension in the object code generation.)
Computing a pointer to before the start of an object invokes undefined behavior, so the previous behavior wasn't technically wrong, but it was unintuitive and served no useful purpose. The new behavior should at least be easier to understand and debug.
