1997-11-18 05:31:00 +00:00
|
|
|
*************************************************************************
|
|
|
|
*
|
|
|
|
* The GNO Shell Project
|
|
|
|
*
|
|
|
|
* Developed by:
|
|
|
|
* Jawaid Bazyar
|
|
|
|
* Tim Meekins
|
|
|
|
*
|
Changes for gsh version 2.0d8:
Fixed several mutual exclusion problems, including a particularly nasty
one that would cause gsh to loop forever inside the memory manager. (You
could identify this one by the "BRA (-23)" at the bottom of the infinite
loop.)
Fixed the string vector print routine to properly handle all numbers of
entries in the hash table. Previously, it would always print duplicate
entries if there were < 6 commands hashed, and would sometimes print
duplicates (depending on previous contents of an internal table) for
other numbers of commands.
gsh would wait on background processes started from an exec file
(executed, not sourced). Now the exec file does not wait on the process,
but the background process is not associated with the parent shell after
the exec file terminates.
Made gsh globbing work more like csh: if none of the requested patterns
are found, print "No match" and exit.
At startup, if /etc/glogin, $HOME/glogin, or $HOME/gshrc does not exist,
don't report a "file not found" error message. (PR#100)
1998-12-31 18:29:14 +00:00
|
|
|
* $Id: orca.asm,v 1.8 1998/12/31 18:29:14 tribby Exp $
|
1998-04-24 15:38:47 +00:00
|
|
|
*
|
1997-11-18 05:31:00 +00:00
|
|
|
**************************************************************************
|
|
|
|
*
|
|
|
|
* ORCA.ASM
|
|
|
|
* By Tim Meekins
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
* Modified by Dave Tribby for GNO 2.0.6
|
1997-11-18 05:31:00 +00:00
|
|
|
*
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
* Builtin command for ORCA editor
|
1997-11-18 05:31:00 +00:00
|
|
|
*
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
* Note: text set up for tabs at col 16, 22, 41, 49, 57, 65
|
|
|
|
* | | | | | |
|
|
|
|
* ^ ^ ^ ^ ^ ^
|
Changes for gsh version 2.0d8:
Fixed several mutual exclusion problems, including a particularly nasty
one that would cause gsh to loop forever inside the memory manager. (You
could identify this one by the "BRA (-23)" at the bottom of the infinite
loop.)
Fixed the string vector print routine to properly handle all numbers of
entries in the hash table. Previously, it would always print duplicate
entries if there were < 6 commands hashed, and would sometimes print
duplicates (depending on previous contents of an internal table) for
other numbers of commands.
gsh would wait on background processes started from an exec file
(executed, not sourced). Now the exec file does not wait on the process,
but the background process is not associated with the parent shell after
the exec file terminates.
Made gsh globbing work more like csh: if none of the requested patterns
are found, print "No match" and exit.
At startup, if /etc/glogin, $HOME/glogin, or $HOME/gshrc does not exist,
don't report a "file not found" error message. (PR#100)
1998-12-31 18:29:14 +00:00
|
|
|
**************************************************************************
|
|
|
|
*
|
|
|
|
* Interfaces defined in this file:
|
|
|
|
*
|
|
|
|
* edit subroutine (4:argv,2:argc) builtin command
|
|
|
|
*
|
1997-11-18 05:31:00 +00:00
|
|
|
**************************************************************************
|
|
|
|
|
1998-04-24 15:38:47 +00:00
|
|
|
mcopy /obj/gno/bin/gsh/orca.mac
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
dummyorca start ; ends up in .root
|
1998-04-24 15:38:47 +00:00
|
|
|
end
|
|
|
|
|
|
|
|
setcom 60
|
1997-11-18 05:31:00 +00:00
|
|
|
|
|
|
|
**************************************************************************
|
|
|
|
*
|
|
|
|
* EDIT: builtin command
|
|
|
|
* syntax: edit pathname...
|
|
|
|
*
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
* Invokes the ORCA editor and edits a file or files.
|
1997-11-18 05:31:00 +00:00
|
|
|
*
|
|
|
|
**************************************************************************
|
|
|
|
|
|
|
|
MAXPARMBUF gequ 1023
|
|
|
|
|
|
|
|
edit START
|
|
|
|
strPtr equ 0
|
|
|
|
inLoopPtr equ strPtr+4
|
|
|
|
argLoopPtr equ inLoopPtr+4
|
|
|
|
sLen equ argLoopPtr+4
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
pathLen equ sLen+2
|
|
|
|
pnum equ pathLen+2
|
|
|
|
editcommand equ pnum+2
|
1997-11-18 05:31:00 +00:00
|
|
|
retval equ editcommand+4
|
|
|
|
sFile equ retval+2 GSString255Ptr
|
|
|
|
inPath equ sFile+4
|
|
|
|
outPath equ inPath+4
|
|
|
|
space equ outPath+4
|
|
|
|
|
|
|
|
subroutine (4:argv,2:argc),space
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
lda argc Make sure there are two or
|
|
|
|
cmp #2 more parameters.
|
|
|
|
bcs enoughparms Otherwise,
|
1998-09-08 16:53:14 +00:00
|
|
|
ldx #^enofile report error:
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
lda #enofile no filename specified
|
1997-11-18 05:31:00 +00:00
|
|
|
jsr errputs
|
1998-09-08 16:53:14 +00:00
|
|
|
lda #1
|
1998-12-21 23:57:08 +00:00
|
|
|
sta retval
|
|
|
|
jmp donedealloc
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
|
|
|
|
; Allocate memory for sFile, inPath, and outPath
|
1997-11-18 05:31:00 +00:00
|
|
|
|
|
|
|
enoughparms anop
|
1998-09-08 16:53:14 +00:00
|
|
|
jsl alloc1024
|
1997-11-18 05:31:00 +00:00
|
|
|
sta sFile
|
|
|
|
stx sFile+2
|
|
|
|
ora sFile+2
|
1998-09-08 16:53:14 +00:00
|
|
|
beq memerr1
|
1997-11-18 05:31:00 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
jsl alloc1024
|
1997-11-18 05:31:00 +00:00
|
|
|
sta inPath
|
|
|
|
stx inPath+2
|
|
|
|
ora inPath+2
|
1998-09-08 16:53:14 +00:00
|
|
|
beq memerr1
|
1997-11-18 05:31:00 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
jsl alloc1024
|
1997-11-18 05:31:00 +00:00
|
|
|
sta outPath
|
|
|
|
stx outPath+2
|
|
|
|
ora outPath+2
|
1998-09-08 16:53:14 +00:00
|
|
|
bne noerr1
|
1997-11-18 05:31:00 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
memerr1 ldx #^enomem Report error:
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
lda #enomem out of memory
|
1997-11-18 05:31:00 +00:00
|
|
|
jsr errputs
|
1998-09-08 16:53:14 +00:00
|
|
|
lda #-1
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
seterr sta retval
|
1997-11-18 05:31:00 +00:00
|
|
|
jmp goaway
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
; Parameters were provided, and memory has been allocated.
|
|
|
|
; Ready to start processing the filename(s).
|
1997-11-18 05:31:00 +00:00
|
|
|
noerr1 anop
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
stz retval Zero return status
|
1998-09-08 16:53:14 +00:00
|
|
|
stz sLen and length of source names.
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
lda #1 Initialize parameter
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
sta pnum number to 1.
|
|
|
|
|
|
|
|
lda sFile strPtr = sFile + 2
|
1997-11-18 05:31:00 +00:00
|
|
|
clc
|
|
|
|
adc #2
|
|
|
|
sta strPtr
|
|
|
|
lda sFile+2
|
|
|
|
adc #0
|
|
|
|
sta strPtr+2
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
bra nodelimit Skip delimiter for 1st file.
|
|
|
|
|
|
|
|
; Loop for getting name, converting it to a full path, and
|
|
|
|
; appending it to sFile
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
doloop short m Between parameters:
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
lda #10 Store newline as delimiter
|
|
|
|
sta [strPtr] character in strPtr.
|
1997-11-18 05:31:00 +00:00
|
|
|
long m
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
inc sLen Bump string length
|
1998-07-20 16:23:11 +00:00
|
|
|
incad strPtr and pointer.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
|
|
|
nodelimit anop
|
1998-09-08 16:53:14 +00:00
|
|
|
lda pnum Get parameter number
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
asl a and turn it into an
|
|
|
|
asl a index to the proper
|
|
|
|
tay argv pointer.
|
|
|
|
lda [argv],y Store address in
|
1998-09-08 16:53:14 +00:00
|
|
|
sta argLoopPtr direct page variable
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
iny2 argLoopPtr.
|
1997-11-18 05:31:00 +00:00
|
|
|
lda [argv],y
|
|
|
|
sta argLoopPtr+2
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
lda inPath Get address of text field
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
clc in inPath.
|
1997-11-18 05:31:00 +00:00
|
|
|
adc #2
|
1998-09-08 16:53:14 +00:00
|
|
|
sta inLoopPtr
|
1997-11-18 05:31:00 +00:00
|
|
|
lda inPath+2
|
|
|
|
adc #0
|
|
|
|
sta inLoopPtr+2
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
; Move argument into inPath, counting characters
|
|
|
|
|
|
|
|
ldy #0
|
|
|
|
|
|
|
|
whileloop lda [argLoopPtr],y Get next character of name.
|
|
|
|
and #$00FF If it's the terminating null,
|
1998-09-08 16:53:14 +00:00
|
|
|
beq donewhile done copying.
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
sta [inLoopPtr],y Store character (and null byte)
|
|
|
|
iny
|
1998-09-08 16:53:14 +00:00
|
|
|
cpy #255 If < 255,
|
|
|
|
bcc whileloop stay in loop.
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
ldx #^einval Print error:
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
lda #einval invalid argument (filename too long)
|
1997-11-18 05:31:00 +00:00
|
|
|
jsr errputs
|
1998-09-08 16:53:14 +00:00
|
|
|
lda #2
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
bra seterr
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
donewhile tya Set length of GS/OS string inPath.
|
1997-11-18 05:31:00 +00:00
|
|
|
sta [inPath]
|
1998-09-08 16:53:14 +00:00
|
|
|
lda #1024 Set max len of result buffer outPath.
|
1997-11-18 05:31:00 +00:00
|
|
|
sta [outPath]
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
; Set up GS/OS ExpandPath parameter buffer and make call.
|
|
|
|
|
1997-11-18 05:31:00 +00:00
|
|
|
mv4 inPath,ep_inputPath
|
|
|
|
mv4 outPath,ep_outputPath
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
ExpandPath ep Expand the pathname.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
; Note: The GS/OS reference says ExpandPath can detect invalid pathname
|
|
|
|
; syntax error, but I can't get this to happen (even with names like
|
|
|
|
; "::/^" and " "). Ignore errors and let the editor report them.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
ldy #2 Get length of result string
|
1997-11-18 05:31:00 +00:00
|
|
|
lda [outPath],y
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
sta pathLen and store in pathLen.
|
1997-11-18 05:31:00 +00:00
|
|
|
clc
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
adc sLen If accumulated length is
|
1998-09-08 16:53:14 +00:00
|
|
|
cmp #MAXPARMBUF beyond the maximum,
|
|
|
|
bcs doloopend don't add this name.
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
sta sLen Store accumulated length in sLen.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
pei (pathLen) Append outPath string
|
1998-09-08 16:53:14 +00:00
|
|
|
pei (outPath+2) to the end of sFile's text.
|
|
|
|
lda outPath
|
1997-11-18 05:31:00 +00:00
|
|
|
clc
|
|
|
|
adc #4
|
|
|
|
pha
|
|
|
|
pei (strPtr+2)
|
|
|
|
pei (strPtr)
|
|
|
|
jsl rmemcpy
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
lda strPtr Add pathLen to strPtr.
|
1997-11-18 05:31:00 +00:00
|
|
|
clc
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
adc pathLen
|
1997-11-18 05:31:00 +00:00
|
|
|
sta strPtr
|
|
|
|
lda strPtr+2
|
|
|
|
adc #0
|
|
|
|
sta strPtr+2
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
doloopend inc pnum pnum++
|
|
|
|
lda pnum if pnum < argc,
|
|
|
|
cmp argc
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
jcc doloop continue processing filenames.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
; All of the arguments have been processed.
|
|
|
|
|
|
|
|
lda sLen Save length in
|
1998-09-08 16:53:14 +00:00
|
|
|
sta [sFile] GS/OS buffer.
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
; Set up shell SetLInfo parameter buffer and make call.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
mv4 sFile,gl_sFile
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
SetLInfoGS gl Set the edit environment.
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
ph4 #editorvar Get value of environment
|
|
|
|
jsl getenv variable "editor".
|
1997-11-18 05:31:00 +00:00
|
|
|
sta editcommand
|
|
|
|
stx editcommand+2
|
1998-09-08 16:53:14 +00:00
|
|
|
ora editcommand+2
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
bne goteditvar If $editor is not defined,
|
1998-09-08 16:53:14 +00:00
|
|
|
ph4 #defedit use default value.
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
bra execit
|
1997-11-18 05:31:00 +00:00
|
|
|
|
1998-07-20 16:23:11 +00:00
|
|
|
goteditvar anop Add 4 to value returned by getenv
|
|
|
|
ldx editcommand+2 to get address of text portion.
|
|
|
|
clc
|
|
|
|
lda editcommand
|
|
|
|
adc #4
|
|
|
|
bcc nobump
|
|
|
|
inx
|
|
|
|
nobump anop
|
|
|
|
phx Push address onto stack.
|
|
|
|
pha
|
|
|
|
execit ph2 #0 Tells execute we're called by system
|
1997-11-18 05:31:00 +00:00
|
|
|
jsl execute
|
1998-09-08 16:53:14 +00:00
|
|
|
sta retval
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
lda editcommand If getenv allocated it,
|
|
|
|
ora editcommand+2
|
|
|
|
beq goaway
|
|
|
|
|
|
|
|
pei (editcommand+2) free the "editcommand" string.
|
1997-11-18 05:31:00 +00:00
|
|
|
pei (editcommand)
|
1998-09-08 16:53:14 +00:00
|
|
|
jsl nullfree
|
1997-11-18 05:31:00 +00:00
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
; See which GS/OS buffers need to be deallocated
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
goaway lda sFile
|
1997-11-18 05:31:00 +00:00
|
|
|
ora sFile+2
|
|
|
|
beq donedealloc
|
|
|
|
ldx sFile+2
|
|
|
|
lda sFile
|
1998-09-08 16:53:14 +00:00
|
|
|
jsl free1024
|
1997-11-18 05:31:00 +00:00
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
lda inPath
|
|
|
|
ora inPath+2
|
|
|
|
beq donedealloc
|
1997-11-18 05:31:00 +00:00
|
|
|
ldx inPath+2
|
|
|
|
lda inPath
|
|
|
|
jsl free1024
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
lda outPath
|
|
|
|
ora outPath+2
|
|
|
|
beq donedealloc
|
1997-11-18 05:31:00 +00:00
|
|
|
ldx outPath+2
|
|
|
|
lda outPath
|
|
|
|
jsl free1024
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
|
|
|
|
; Return to caller with status set to value in retval
|
|
|
|
|
1998-09-08 16:53:14 +00:00
|
|
|
donedealloc return 2:retval
|
1997-11-18 05:31:00 +00:00
|
|
|
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
; Parameter block for GS/OS ExpandPath call (p. 140 in GS/OS Reference)
|
|
|
|
ep dc i2'2' pCount
|
|
|
|
ep_inputPath dc i4'0' input pointer (GS/OS string)
|
|
|
|
ep_outputPath dc i4'0' output pointer (GS/OS result buf)
|
|
|
|
|
|
|
|
; Error messages
|
1997-11-18 05:31:00 +00:00
|
|
|
enofile dc c'edit: no filename specified',h'0D00'
|
|
|
|
enomem dc c'edit: out of memory',h'0D00'
|
|
|
|
einval dc c'edit: invalid argument (filename too long)',h'0D00'
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
; Parameter block for shell SetLInfo call (p. 433 in ORCA/M book)
|
1997-11-18 05:31:00 +00:00
|
|
|
gl anop
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
dc i2'11' pCount
|
|
|
|
gl_sfile dc i4'0' source file name (GS/OS string)
|
|
|
|
dc i4'nullparm' output file name (compile/link)
|
|
|
|
dc i4'nullparm' names in NAMES parameter list (compile)
|
|
|
|
dc i4'nullparm' compiler commands (compiler)
|
|
|
|
dc i1'0' max err level allowed (compile/link)
|
|
|
|
dc i1'0' max err level found (compile/link)
|
|
|
|
dc i1'0' operations flags (compile/link)
|
|
|
|
dc i1'0' keep flag (compile)
|
1998-07-20 16:23:11 +00:00
|
|
|
dc i4'0' minus flags (see ASML command descr)
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
dc i4'$08000000' plus flags [+E] (see ASML)
|
|
|
|
dc i4'0' origin (link)
|
1997-11-18 05:31:00 +00:00
|
|
|
|
|
|
|
nullparm dc i2'0'
|
|
|
|
|
1998-07-20 16:23:11 +00:00
|
|
|
editorvar gsstr 'editor' Name of editor environment variable
|
|
|
|
|
Major changes to gsh with this checkin:
* When ~ is parsed and next character is a delimiter, make sure contents
of expanded $HOME match the user's delimiter.
* When wildcard patterns don't match, rather than terminating the command
gsh now prints "No match: <pattern> ignored" and passes the command line
minus the unmatched patterns on to be executed.
* Modified echo command so it doesn't add a blank to the end.
* Make "clear" and "source" built-ins non-forked commands. Unforking
"source" allows prefixes to be set in files that are sourced.
* Add loop to parse a single command (removing leading whitespace) before
sending it off to be expanded and executed. Skip null lines and comments
at this level. This allows later commands that depend upon variables set
in the 1st command to work; e.g.: set t_num=1 ; echo "Test number $t_num"
Also fixes problems seen when tab was first character of multiple lines.
* Initialize environment variable flags at startup (for echo, nodirexec,
nonewline, noglob, nobeep, pushdsilent, term, and ignoreeof). Set
flag when env var is set in upper or lower case (formerly, only worked
with lower case).
* Lots of places two-word addresses are incremented using inc, without
checking for overflow into the high-order word. As these are discovered,
they are changed to use adc on both words.
See file UpdateLog for detailed list of changes.
1998-06-30 17:26:04 +00:00
|
|
|
defedit dc c'4:editor',h'00' Default value for editor
|
1997-11-18 05:31:00 +00:00
|
|
|
END
|