sysctl: move code around to get rid of forward references.

(incidentally it helps gcc to make code smaller)
This commit is contained in:
Denis Vlasenko 2009-03-29 02:23:16 +00:00
parent 5a6617acb8
commit 038fe44713

View File

@ -7,20 +7,12 @@
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details. * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
* *
* Changelog: * Changelog:
* v1.01: * v1.01 - added -p <preload> to preload values from a file
* - added -p <preload> to preload values from a file * v1.01.1 - busybox applet aware by <solar@gentoo.org>
* v1.01.1
* - busybox applet aware by <solar@gentoo.org>
*
*/ */
#include "libbb.h" #include "libbb.h"
static int sysctl_act_on_setting(char *setting);
static int sysctl_display_all(const char *path);
static int sysctl_handle_preload_file(const char *filename);
static void sysctl_dots_to_slashes(char *name);
enum { enum {
FLAG_SHOW_KEYS = 1 << 0, FLAG_SHOW_KEYS = 1 << 0,
FLAG_SHOW_KEY_ERRORS = 1 << 1, FLAG_SHOW_KEY_ERRORS = 1 << 1,
@ -29,67 +21,52 @@ enum {
FLAG_PRELOAD_FILE = 1 << 4, FLAG_PRELOAD_FILE = 1 << 4,
FLAG_WRITE = 1 << 5, FLAG_WRITE = 1 << 5,
}; };
#define OPTION_STR "neAapw"
int sysctl_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; static void sysctl_dots_to_slashes(char *name)
int sysctl_main(int argc UNUSED_PARAM, char **argv)
{ {
int retval; char *cptr, *last_good, *end;
int opt;
opt = getopt32(argv, "+neAapw"); /* '+' - stop on first non-option */ /* Convert minimum number of '.' to '/' so that
argv += optind; * we end up with existing file's name.
opt ^= (FLAG_SHOW_KEYS | FLAG_SHOW_KEY_ERRORS); *
option_mask32 = opt; * Example from bug 3894:
* net.ipv4.conf.eth0.100.mc_forwarding ->
* net/ipv4/conf/eth0.100/mc_forwarding
* NB: net/ipv4/conf/eth0/mc_forwarding *also exists*,
* therefore we must start from the end, and if
* we replaced even one . -> /, start over again,
* but never replace dots before the position
* where last replacement occurred.
*
* Another bug we later had is that
* net.ipv4.conf.eth0.100
* (without .mc_forwarding) was mishandled.
*
* To set up testing: modprobe 8021q; vconfig add eth0 100
*/
end = name + strlen(name);
last_good = name - 1;
*end = '.'; /* trick the loop into trying full name too */
if (opt & FLAG_PRELOAD_FILE) { again:
option_mask32 |= FLAG_WRITE; cptr = end;
/* xchdir("/proc/sys") is inside */ while (cptr > last_good) {
return sysctl_handle_preload_file(*argv ? *argv : "/etc/sysctl.conf"); if (*cptr == '.') {
*cptr = '\0';
//bb_error_msg("trying:'%s'", name);
if (access(name, F_OK) == 0) {
if (cptr != end) /* prevent trailing '/' */
*cptr = '/';
//bb_error_msg("replaced:'%s'", name);
last_good = cptr;
goto again;
}
*cptr = '.';
}
cptr--;
} }
xchdir("/proc/sys"); *end = '\0';
/* xchroot(".") - if you are paranoid */
if (opt & (FLAG_TABLE_FORMAT | FLAG_SHOW_ALL)) {
return sysctl_display_all(".");
}
retval = 0;
while (*argv) {
sysctl_dots_to_slashes(*argv);
retval |= sysctl_display_all(*argv);
argv++;
}
return retval;
}
/* Set sysctl's from a conf file. Format example:
* # Controls IP packet forwarding
* net.ipv4.ip_forward = 0
*/
static int sysctl_handle_preload_file(const char *filename)
{
char *token[2];
parser_t *parser;
parser = config_open(filename);
/* Must do it _after_ config_open(): */
xchdir("/proc/sys");
/* xchroot(".") - if you are paranoid */
//TODO: ';' is comment char too
//TODO: comment may be only at line start. "var=1 #abc" - "1 #abc" is the value
// (but _whitespace_ from ends should be trimmed first (and we do it right))
//TODO: "var==1" is mishandled (must use "=1" as a value, but uses "1")
while (config_read(parser, token, 2, 2, "# \t=", PARSE_NORMAL)) {
sysctl_dots_to_slashes(token[0]);
/* Save ~4 bytes by using parser internals */
/* parser->line is big enough for sprintf */
sprintf(parser->line, "%s=%s", token[0], token[1]);
sysctl_display_all(parser->line);
}
if (ENABLE_FEATURE_CLEAN_UP)
config_close(parser);
return 0;
} }
static int sysctl_act_on_setting(char *setting) static int sysctl_act_on_setting(char *setting)
@ -186,7 +163,7 @@ static int sysctl_act_on_setting(char *setting)
return retval; return retval;
} }
static int sysctl_display_all(const char *path) static int sysctl_act_recursive(const char *path)
{ {
DIR *dirp; DIR *dirp;
struct stat buf; struct stat buf;
@ -204,7 +181,7 @@ static int sysctl_display_all(const char *path)
if (next == NULL) if (next == NULL)
continue; /* d_name is "." or ".." */ continue; /* d_name is "." or ".." */
/* if path was ".", drop "./" prefix: */ /* if path was ".", drop "./" prefix: */
retval |= sysctl_display_all((next[0] == '.' && next[1] == '/') ? retval |= sysctl_act_recursive((next[0] == '.' && next[1] == '/') ?
next + 2 : next); next + 2 : next);
free(next); free(next);
} }
@ -218,48 +195,64 @@ static int sysctl_display_all(const char *path)
return retval; return retval;
} }
static void sysctl_dots_to_slashes(char *name) /* Set sysctl's from a conf file. Format example:
* # Controls IP packet forwarding
* net.ipv4.ip_forward = 0
*/
static int sysctl_handle_preload_file(const char *filename)
{ {
char *cptr, *last_good, *end; char *token[2];
parser_t *parser;
/* Convert minimum number of '.' to '/' so that parser = config_open(filename);
* we end up with existing file's name. /* Must do it _after_ config_open(): */
* xchdir("/proc/sys");
* Example from bug 3894: /* xchroot(".") - if you are paranoid */
* net.ipv4.conf.eth0.100.mc_forwarding ->
* net/ipv4/conf/eth0.100/mc_forwarding
* NB: net/ipv4/conf/eth0/mc_forwarding *also exists*,
* therefore we must start from the end, and if
* we replaced even one . -> /, start over again,
* but never replace dots before the position
* where last replacement occurred.
*
* Another bug we later had is that
* net.ipv4.conf.eth0.100
* (without .mc_forwarding) was mishandled.
*
* To set up testing: modprobe 8021q; vconfig add eth0 100
*/
end = name + strlen(name);
last_good = name - 1;
*end = '.'; /* trick the loop into trying full name too */
again: //TODO: ';' is comment char too
cptr = end; //TODO: comment may be only at line start. "var=1 #abc" - "1 #abc" is the value
while (cptr > last_good) { // (but _whitespace_ from ends should be trimmed first (and we do it right))
if (*cptr == '.') { //TODO: "var==1" is mishandled (must use "=1" as a value, but uses "1")
*cptr = '\0'; while (config_read(parser, token, 2, 2, "# \t=", PARSE_NORMAL)) {
//bb_error_msg("trying:'%s'", name); sysctl_dots_to_slashes(token[0]);
if (access(name, F_OK) == 0) { /* Save ~4 bytes by using parser internals */
if (cptr != end) /* prevent trailing '/' */ /* parser->line is big enough for sprintf */
*cptr = '/'; sprintf(parser->line, "%s=%s", token[0], token[1]);
//bb_error_msg("replaced:'%s'", name); sysctl_act_recursive(parser->line);
last_good = cptr;
goto again;
}
*cptr = '.';
}
cptr--;
} }
*end = '\0'; if (ENABLE_FEATURE_CLEAN_UP)
config_close(parser);
return 0;
}
int sysctl_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int sysctl_main(int argc UNUSED_PARAM, char **argv)
{
int retval;
int opt;
opt = getopt32(argv, "+" OPTION_STR); /* '+' - stop on first non-option */
argv += optind;
opt ^= (FLAG_SHOW_KEYS | FLAG_SHOW_KEY_ERRORS);
option_mask32 = opt;
if (opt & FLAG_PRELOAD_FILE) {
option_mask32 |= FLAG_WRITE;
/* xchdir("/proc/sys") is inside */
return sysctl_handle_preload_file(*argv ? *argv : "/etc/sysctl.conf");
}
xchdir("/proc/sys");
/* xchroot(".") - if you are paranoid */
if (opt & (FLAG_TABLE_FORMAT | FLAG_SHOW_ALL)) {
return sysctl_act_recursive(".");
}
retval = 0;
while (*argv) {
sysctl_dots_to_slashes(*argv);
retval |= sysctl_act_recursive(*argv);
argv++;
}
return retval;
} }