mirror of
https://github.com/sheumann/hush.git
synced 2024-12-27 16:31:24 +00:00
examples/udhcp/udhcpd.conf: update
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This commit is contained in:
parent
4945ed32d7
commit
2b0e957808
@ -1,88 +1,59 @@
|
||||
# Sample udhcpd configuration file (/etc/udhcpd.conf)
|
||||
# Values shown are defaults
|
||||
|
||||
# The start and end of the IP lease block
|
||||
|
||||
start 192.168.0.20 #default: 192.168.0.20
|
||||
end 192.168.0.254 #default: 192.168.0.254
|
||||
|
||||
start 192.168.0.20
|
||||
end 192.168.0.254
|
||||
|
||||
# The interface that udhcpd will use
|
||||
interface eth0
|
||||
|
||||
interface eth0 #default: eth0
|
||||
|
||||
|
||||
# The maximim number of leases (includes addressesd reserved
|
||||
# by OFFER's, DECLINE's, and ARP conficts
|
||||
|
||||
#max_leases 254 #default: 254
|
||||
|
||||
|
||||
# If remaining is true (default), udhcpd will store the time
|
||||
# remaining for each lease in the udhcpd leases file. This is
|
||||
# for embedded systems that cannot keep time between reboots.
|
||||
# If you set remaining to no, the absolute time that the lease
|
||||
# expires at will be stored in the dhcpd.leases file.
|
||||
|
||||
#remaining yes #default: yes
|
||||
|
||||
# The maximim number of leases (includes addresses reserved
|
||||
# by OFFER's, DECLINE's, and ARP conficts). Will be corrected
|
||||
# if it's bigger than IP lease block, but it ok to make it
|
||||
# smaller than lease block.
|
||||
#max_leases 254
|
||||
|
||||
# The time period at which udhcpd will write out a dhcpd.leases
|
||||
# file. If this is 0, udhcpd will never automatically write a
|
||||
# lease file. (specified in seconds)
|
||||
# lease file. Specified in seconds.
|
||||
#auto_time 7200
|
||||
|
||||
#auto_time 7200 #default: 7200 (2 hours)
|
||||
# The amount of time that an IP will be reserved (leased to nobody)
|
||||
# if a DHCP decline message is received (seconds).
|
||||
#decline_time 3600
|
||||
|
||||
# The amount of time that an IP will be reserved
|
||||
# if an ARP conflct occurs (seconds).
|
||||
#conflict_time 3600
|
||||
|
||||
# The amount of time that an IP will be reserved (leased) for if a
|
||||
# DHCP decline message is received (seconds).
|
||||
|
||||
#decline_time 3600 #default: 3600 (1 hour)
|
||||
|
||||
|
||||
# The amount of time that an IP will be reserved (leased) for if an
|
||||
# ARP conflct occurs. (seconds
|
||||
|
||||
#conflict_time 3600 #default: 3600 (1 hour)
|
||||
|
||||
|
||||
# How long an offered address is reserved (leased) in seconds
|
||||
|
||||
#offer_time 60 #default: 60 (1 minute)
|
||||
|
||||
# If a lease to be given is below this value, the full lease time is
|
||||
# instead used (seconds).
|
||||
|
||||
#min_lease 60 #defult: 60
|
||||
# How long an offered address is reserved (seconds).
|
||||
#offer_time 60
|
||||
|
||||
# If client asks for lease below this value, it will be rounded up
|
||||
# to this value (seconds).
|
||||
#min_lease 60
|
||||
|
||||
# The location of the leases file
|
||||
|
||||
#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
|
||||
#lease_file /var/lib/misc/udhcpd.leases
|
||||
|
||||
# The location of the pid file
|
||||
#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
|
||||
#pidfile /var/run/udhcpd.pid
|
||||
|
||||
# Everytime udhcpd writes a leases file, the below script will be called.
|
||||
# Useful for writing the lease file to flash every few hours.
|
||||
|
||||
#notify_file #default: (no script)
|
||||
|
||||
#notify_file dumpleases # <--- useful for debugging
|
||||
|
||||
# The following are bootp specific options, setable by udhcpd.
|
||||
#notify_file # default: no script
|
||||
#notify_file dumpleases # useful for debugging
|
||||
|
||||
# The following are bootp specific options, settable by udhcpd.
|
||||
#siaddr 192.168.0.22 #default: 0.0.0.0
|
||||
|
||||
#sname zorak #default: (none)
|
||||
|
||||
#boot_file /var/nfs_root #default: (none)
|
||||
#sname zorak #default: none
|
||||
#boot_file /var/nfs_root #default: none
|
||||
|
||||
# The remainer of options are DHCP options and can be specifed with the
|
||||
# keyword 'opt' or 'option'. If an option can take multiple items, such
|
||||
# as the dns option, they can be listed on the same line, or multiple
|
||||
# lines. The only option with a default is 'lease'.
|
||||
|
||||
#Examles
|
||||
# Examples:
|
||||
opt dns 192.168.10.2 192.168.10.10
|
||||
option subnet 255.255.255.0
|
||||
opt router 192.168.10.2
|
||||
@ -91,8 +62,7 @@ option dns 129.219.13.81 # appened to above DNS servers for a total of 3
|
||||
option domain local
|
||||
option lease 864000 # 10 days of seconds
|
||||
|
||||
|
||||
# Currently supported options, for more info, see options.c
|
||||
# Currently supported options (for more info, see options.c):
|
||||
#opt subnet
|
||||
#opt timezone
|
||||
#opt router
|
||||
@ -115,9 +85,6 @@ option lease 864000 # 10 days of seconds
|
||||
#opt tftp
|
||||
#opt bootfile
|
||||
|
||||
|
||||
# Static leases map
|
||||
#static_lease 00:60:08:11:CE:4E 192.168.0.54
|
||||
#static_lease 00:60:08:11:CE:3E 192.168.0.44
|
||||
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user