hush/networking/telnetd.ctrlSQ.patch

From: "Doug Graham" <dgraham@nortel.com>
Date: 2009-01-22 07:20

Hello,

Busybox's telnetd does not disable local (client-side) flow control
properly.  It does not put the pty into packet mode and then notify the
client whenever flow control is disabled by an application running under
its control.  The result is that ^S/^Q are not passed through to the
application, which is painful when the application is an emacs variant.

I suppose that support for this might be considered bloat, but the
included patch only adds about 200 bytes of text to x86 busybox and 300
bytes to mipsel busybox.  Please consider applying.

=============================

NB: the patch doesn't work as-is because we now have iac_safe_write()
which quotes IACs on output.

=============================
Docs:

The following ioctl(2) calls apply only to pseudo terminals:

TIOCSTOP Stops output to a terminal (e.g. like typing ^S). Takes no parameter.

TIOCSTART Restarts output (stopped by TIOCSTOP or by typing ^S). Takes no parameter.

TIOCPKT         Enable/disable packet mode. When applied to the master side of a pseudo terminal, each
subsequent read(2) from the terminal will return data written on the slave part of the pseudo terminal preceded by a
zero byte (symbolically defined as TIOCPKT_DATA), or a single byte reflecting control status information.
In the latter case, the byte is an inclusive-or of zero or more of the bits:

TIOCPKT_FLUSHREAD     whenever the read queue for the terminal is flushed.
TIOCPKT_FLUSHWRITE    whenever the write queue for the terminal is flushed.
TIOCPKT_STOP    whenever output to the terminal is stopped a la ^S.
TIOCPKT_START   whenever output to the terminal is restarted.
TIOCPKT_DOSTOP  whenever t_stopc is ^S and t_startc is ^Q.
TIOCPKT_NOSTOP  whenever the start and stop characters are not ^S/^Q.

While this mode is in use, the presence of control status information to be read from the master side may be detected
by a select(2) for exceptional conditions.

This mode is used by rlogin(1) and rlogind(8) to implement a remote-echoed, locally ^S/^Q flow-controlled remote login
with proper back-flushing of output; it can be used by other similar programs.

TIOCUCNTL       Enable/disable a mode that allows a small number of simple user ioctl(2) commands to be passed through
the pseudo-terminal, using a protocol similar to that of TIOCPKT. The TIOCUCNTL and TIOCPKT modes are mutually
exclusive. This mode is enabled from the master side of a pseudo terminal. Each subsequent read(2) from the master side
will return data written on the slave part of the pseudo terminal preceded by a zero byte, or a single byte reflecting a
user control operation on the slave side. A user control command consists of a special ioctl(2) operation with no data;
the command is given as UIOCCMD (n), where n is a number in the range 1-255. The operation value n will be received as
a single byte on the next read(2) from the master side. The ioctl(2) UIOCCMD (0) is a no-op that may be used to probe
for the existence of this facility. As with TIOCPKT mode, command operations may be detected with a select(2) for
exceptional conditions.

--- busybox-1.13.2/networking/telnetd.c	2009/01/21 20:02:39	1.1
+++ busybox-1.13.2/networking/telnetd.c	2009/01/22 00:35:28
@@ -38,6 +38,9 @@
 	int sockfd_read, sockfd_write, ptyfd;
 	int shell_pid;
 
+#ifdef TIOCPKT
+	int flowstate;
+#endif
 	/* two circular buffers */
 	/*char *buf1, *buf2;*/
 /*#define TS_BUF1 ts->buf1*/
@@ -170,6 +173,9 @@
 	int fd, pid;
 	char tty_name[GETPTY_BUFSIZE];
 	struct tsession *ts = xzalloc(sizeof(struct tsession) + BUFSIZE * 2);
+#ifdef TIOCPKT
+	int on = 1;
+#endif
 
 	/*ts->buf1 = (char *)(ts + 1);*/
 	/*ts->buf2 = ts->buf1 + BUFSIZE;*/
@@ -180,6 +186,10 @@
 		maxfd = fd;
 	ts->ptyfd = fd;
 	ndelay_on(fd);
+#ifdef TIOCPKT
+	ioctl(fd, TIOCPKT, &on);
+	ts->flowstate = TIOCPKT_DOSTOP;
+#endif
 #if ENABLE_FEATURE_TELNETD_STANDALONE
 	ts->sockfd_read = sock;
 	/* SO_KEEPALIVE by popular demand */
@@ -385,6 +395,16 @@
 		portnbr = 23,
 	};
 #endif
+#ifdef TIOCPKT
+	int control;
+	static const char lflow_on[] =
+	    {IAC, SB, TELOPT_LFLOW, LFLOW_ON, IAC, SE};
+	static const char lflow_off[] =
+	    {IAC, SB, TELOPT_LFLOW, LFLOW_OFF, IAC, SE};
+# define RESERVED sizeof(lflow_on)
+#else
+# define RESERVED 0
+#endif
 	/* Even if !STANDALONE, we accept (and ignore) -i, thus people
 	 * don't need to guess whether it's ok to pass -i to us */
 	opt = getopt32(argv, "f:l:Ki" USE_FEATURE_TELNETD_STANDALONE("p:b:F"),
@@ -475,7 +495,7 @@
 				FD_SET(ts->sockfd_read, &rdfdset);
 			if (ts->size2 > 0)       /* can write to socket */
 				FD_SET(ts->sockfd_write, &wrfdset);
-			if (ts->size2 < BUFSIZE) /* can read from pty */
+			if (ts->size2 < (BUFSIZE - RESERVED)) /* can read from pty */
 				FD_SET(ts->ptyfd, &rdfdset);
 		}
 		ts = next;
@@ -593,6 +613,52 @@
 					goto skip4;
 				goto kill_session;
 			}
+#ifdef TIOCPKT
+			control = TS_BUF2[ts->rdidx2];
+			if (--count > 0 && control == TIOCPKT_DATA) {
+				/*
+				 * If we are in packet mode, and we have
+				 * just read a chunk of actual data from
+				 * the pty, then there is the TIOCPKT_DATA
+				 * byte (zero) that we have got to remove
+				 * somehow.  If there were no chars in
+				 * TS_BUF2 before we did this read, then
+				 * we can optimize by just advancing wridx2.
+				 * Otherwise we have to copy the new data down
+				 * to close the gap (Could use readv() instead).
+				 */
+				if (ts->size2 == 0)
+					ts->wridx2++;
+				else {
+					memmove(TS_BUF2 + ts->rdidx2,
+						TS_BUF2 + ts->rdidx2 + 1, count);
+				}
+			}
+
+			/*
+			 * If the flow control state changed, notify
+			 * the client.  If "control" is not TIOCPKT_DATA,
+			 * then there are no data bytes to worry about.
+			 */
+			if ((control & (TIOCPKT_DOSTOP|TIOCPKT_NOSTOP)) != 0
+			 && ts->flowstate != (control & TIOCPKT_DOSTOP)) {
+				const char *p = ts->flowstate ? lflow_off : lflow_on;
+
+				/*
+				 * We know we have enough free slots available
+				 * (see RESERVED) but they are not necessarily
+				 * contiguous; we may have to wrap.
+				 */
+				for (count = sizeof(lflow_on); count > 0; count--) {
+					TS_BUF2[ts->rdidx2++] = *p++;
+					if (ts->rdidx2 >= BUFSIZE)
+						ts->rdidx2 = 0;
+					ts->size2++;
+				}
+
+				ts->flowstate = control & TIOCPKT_DOSTOP;
+			}
+#endif /* TIOCPKT */
 			ts->size2 += count;
 			ts->rdidx2 += count;
 			if (ts->rdidx2 >= BUFSIZE) /* actually == BUFSIZE */

--Doug
_______________________________________________
busybox mailing list
busybox@busybox.net
http://lists.busybox.net/mailman/listinfo/busybox