mirror of
https://github.com/sheumann/hush.git
synced 2024-08-22 17:29:34 +00:00
------------------------------------------------------------------------ r15465 | aldot | 2006-06-21 20:48:06 +0200 (Wed, 21 Jun 2006) | 3 lines - use CONFIG_BUSYBOX_EXEC_PATH as before it one was broken by a recent revert. - use xchdir() since all is invain if it fails there anyways, supposedly ------------------------------------------------------------------------ r15466 | aldot | 2006-06-21 20:55:16 +0200 (Wed, 21 Jun 2006) | 2 lines - adjust docs to take CONFIG_BUSYBOX_EXEC_PATH into account. ------------------------------------------------------------------------ r15467 | aldot | 2006-06-21 21:31:24 +0200 (Wed, 21 Jun 2006) | 18 lines - partial fallout of my TREE_USED touchup against gcc-4.2: rip unused vars, save s 144 bytes text data bss dec hex filename 862434 10156 645924 1518514 172bb2 busybox.old 862322 10156 645892 1518370 172b22 busybox function old new delta z_len 4 - -4 textend 4 - -4 part_nb 4 - -4 insize 4 - -4 ifile_size 4 - -4 do_link 4 - -4 new_text 70 60 -10 ipaddr_list_link 33 23 -10 gzip_main 898 822 -76 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 0/3 up/down: 0/-120) Total: -120 bytes ------------------------------------------------------------------------ r15468 | aldot | 2006-06-21 21:43:05 +0200 (Wed, 21 Jun 2006) | 19 lines - remove useless global exports function old new delta rpm_main 940 1601 +661 rpm_getstring 107 112 +5 rpm_getint 148 153 +5 loop_through_files 103 106 +3 fileaction_dobackup 115 113 -2 fileaction_list 5 - -5 rpm_getcount 42 - -42 extract_cpio_gz 161 - -161 rpm_gettags 504 - -504 ------------------------------------------------------------------------------ (add/remove: 0/4 grow/shrink: 4/1 up/down: 674/-714) Total: -40 bytes text data bss dec hex filename 862322 10156 645892 1518370 172b22 busybox.old 862290 10156 645892 1518338 172b02 busybox ------------------------------------------------------------------------ r15555 | aldot | 2006-06-30 14:10:11 +0200 (Fri, 30 Jun 2006) | 22 lines - shrink syslog a little bit, move a big buffer (for 'line') off the bss, fold s emaphore stuff into single caller manually. stats: function old new delta logMessage 395 427 +32 message 1245 1257 +12 opts - 4 +4 small 1 - -1 local_logging 4 - -4 doRemoteLog 4 - -4 circular_logging 4 - -4 syslogd_main 1299 1285 -14 static.res 36 16 -20 .rodata 186650 186586 -64 static.line 1025 - -1025 ------------------------------------------------------------------------------ (add/remove: 1/5 grow/shrink: 2/3 up/down: 48/-1136) Total: -1088 bytes cow@s37:~/src/busybox_scratch$ size sysklogd/syslogd.o{.orig,} text data bss dec hex filename 3723 348 5242 9313 2461 sysklogd/syslogd.o.orig 3697 348 4188 8233 2029 sysklogd/syslogd.o ============================================================================== Overall bloatcheck for the changeset mentioned above: function old new delta rpm_main 953 1608 +655 logMessage 395 427 +32 message 1245 1257 +12 opts - 4 +4 rpm_getstring 107 110 +3 rpm_getint 148 151 +3 loop_through_files 103 104 +1 small 1 - -1 fileaction_dobackup 115 113 -2 z_len 4 - -4 textend 4 - -4 part_nb 4 - -4 local_logging 4 - -4 insize 4 - -4 ifile_size 4 - -4 do_link 4 - -4 doRemoteLog 4 - -4 circular_logging 4 - -4 fileaction_list 5 - -5 new_text 70 60 -10 ipaddr_list_link 33 23 -10 clear_bufs 31 21 -10 syslogd_main 1287 1273 -14 builtin_help 190 176 -14 static.res 36 16 -20 builtin_source 229 199 -30 rpm_getcount 42 - -42 gzip_main 842 786 -56 .rodata 227176 227112 -64 lash_main 609 527 -82 busy_loop 3883 3739 -144 extract_cpio_gz 155 - -155 rpm_gettags 501 - -501 static.line 1025 - -1025 ------------------------------------------------------------------------------ (add/remove: 1/15 grow/shrink: 6/12 up/down: 710/-2221) Total: -1511 bytes
126 lines
5.2 KiB
Plaintext
126 lines
5.2 KiB
Plaintext
Building:
|
|
=========
|
|
|
|
The BusyBox build process is similar to the Linux kernel build:
|
|
|
|
make menuconfig # This creates a file called ".config"
|
|
make # This creates the "busybox" executable
|
|
make install # or make PREFIX=/path/from/root install
|
|
|
|
The full list of configuration and install options is available by typing:
|
|
|
|
make help
|
|
|
|
Quick Start:
|
|
============
|
|
|
|
The easy way to try out BusyBox for the first time, without having to install
|
|
it, is to enable all features and then use "standalone shell" mode with a
|
|
blank command $PATH.
|
|
|
|
To enable all features, use "make defconfig", which produces the largest
|
|
general-purpose configuration. (It's allyesconfig minus debugging options,
|
|
optional packaging choices, and a few special-purpose features requiring
|
|
extra configuration to use.)
|
|
|
|
make defconfig
|
|
make
|
|
PATH= ./busybox ash
|
|
|
|
Standalone shell mode causes busybox's built-in command shell to run
|
|
any built-in busybox applets directly, without looking for external
|
|
programs by that name. Supplying an empty command path (as above) means
|
|
the only commands busybox can find are the built-in ones.
|
|
|
|
Note that the standalone shell requires CONFIG_BUSYBOX_EXEC_PATH
|
|
to be set appropriately, depending on whether or not /proc/self/exe is
|
|
available or not. If you do not have /proc, then point that config option
|
|
to the location of your busybox binary, usually /bin/busybox.
|
|
|
|
Configuring Busybox:
|
|
====================
|
|
|
|
Busybox is optimized for size, but enabling the full set of functionality
|
|
still results in a fairly large executable -- more than 1 megabyte when
|
|
statically linked. To save space, busybox can be configured with only the
|
|
set of applets needed for each environment. The minimal configuration, with
|
|
all applets disabled, produces a 4k executable. (It's useless, but very small.)
|
|
|
|
The manual configurator "make menuconfig" modifies the existing configuration.
|
|
(For systems without ncurses, try "make config" instead.) The two most
|
|
interesting starting configurations are "make allnoconfig" (to start with
|
|
everything disabled and add just what you need), and "make defconfig" (to
|
|
start with everything enabled and remove what you don't need). If menuconfig
|
|
is run without an existing configuration, make defconfig will run first to
|
|
create a known starting point.
|
|
|
|
Other starting configurations (mostly used for testing purposes) include
|
|
"make allbareconfig" (enables all applets but disables all optional features),
|
|
"make allyesconfig" (enables absolutely everything including debug features),
|
|
and "make randconfig" (produce a random configuration).
|
|
|
|
Configuring BusyBox produces a file ".config", which can be saved for future
|
|
use. Run "make oldconfig" to bring a .config file from an older version of
|
|
busybox up to date.
|
|
|
|
Installing Busybox:
|
|
===================
|
|
|
|
Busybox is a single executable that can behave like many different commands,
|
|
and BusyBox uses the name it was invoked under to determine the desired
|
|
behavior. (Try "mv busybox ls" and then "./ls -l".)
|
|
|
|
Installing busybox consists of creating symlinks (or hardlinks) to the busybox
|
|
binary for each applet enabled in busybox, and making sure these symlinks are
|
|
in the shell's command $PATH. Running "make install" creates these symlinks,
|
|
or "make install-hardlinks" creates hardlinks instead (useful on systems with
|
|
a limited number of inodes). This install process uses the file
|
|
"busybox.links" (created by make), which contains the list of enabled applets
|
|
and the path at which to install them.
|
|
|
|
Installing links to busybox is not always necessary. The special applet name
|
|
"busybox" (or with any optional suffix, such as "busybox-static") uses the
|
|
first argument to determine which applet to behave as, for example
|
|
"./busybox cat LICENSE". (Running the busybox applet with no arguments gives
|
|
a list of all enabled applets.) The standalone shell can also call busybox
|
|
applets without links to busybox under other names in the filesystem. You can
|
|
also configure a standaone install capability into the busybox base applet,
|
|
and then install such links at runtime with one of "busybox --install" (for
|
|
hardlinks) or "busybox --install -s" (for symlinks).
|
|
|
|
If you enabled the busybox shared library feature (libbusybox.so) and want
|
|
to run tests without installing, set your LD_LIBRARY_PATH accordingly when
|
|
running the executable:
|
|
|
|
LD_LIBRARY_PATH=`pwd` ./busybox
|
|
|
|
Building out-of-tree:
|
|
=====================
|
|
|
|
By default, the BusyBox build puts its temporary files in the source tree.
|
|
Building from a read-only source tree, or building multiple configurations from
|
|
the same source directory, requires the ability to put the temporary files
|
|
somewhere else.
|
|
|
|
To build out of tree, cd to an empty directory and configure busybox from there:
|
|
|
|
make -f /path/to/source/Makefile defconfig
|
|
make
|
|
make install
|
|
|
|
Alternately, use the O=$BUILDPATH option (with an absolute path) during the
|
|
configuration step, as in:
|
|
|
|
make O=/some/empty/directory allyesconfig
|
|
cd /some/empty/directory
|
|
make
|
|
make PREFIX=. install
|
|
|
|
More Information:
|
|
=================
|
|
|
|
Se also the busybox FAQ, under the questions "How can I get started using
|
|
BusyBox" and "How do I build a BusyBox-based system?" The BusyBox FAQ is
|
|
available from http://www.busybox.net/FAQ.html or as the file
|
|
docs/busybox.net/FAQ.html in this tarball.
|