mirror of
https://github.com/erichelgeson/BlueSCSI.git
synced 2024-12-22 12:30:12 +00:00
26 lines
912 B
Plaintext
26 lines
912 B
Plaintext
|
# Troubleshooting 1.0-b
|
||
|
|
:toc: macro
|
||
|
|
|
||
|
|
NOTE: If your BlueSCSI was shipped after April 3rd, 2021 please refer to the 1.0-c troubleshooting guide.
|
||
|
|
|
||
|
|
## Green LED Flashes on and off
|
||
|
|
|
||
|
|
This indicates BlueSCSI could not find any files on the SD card or communicate with the SD card.
|
||
|
|
|
||
|
|
Ensure your files are named properly (case sensitive) following the naming convetion in the readme.
|
||
|
|
|
||
|
|
If you recived a kit - verify all connections and that the outside of the SD holder is grounded.
|
||
|
|
|
||
|
|
## LOG.txt is empty
|
||
|
|
|
||
|
|
This indicates the BlueSCSI could communicate with the SD Card but found no files. Check your naming convention.
|
||
|
|
|
||
|
|
## Slow performance
|
||
|
|
|
||
|
|
Ensure you are using a good SD card. SD card quality can vary widely.
|
||
|
|
|
||
|
|
Format your card as ExFat - users have seen quite a jump in performance.
|
||
|
|
|
||
|
|
## (Kit Only) Verify you are not using a fake
|
||
|
|
|
||
|
|
https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]
|