Move troubleshooting to wiki

This commit is contained in:
Eric Helgeson 2021-06-13 09:59:09 -05:00
parent 4c4d0146c5
commit 8711299b8f

View File

@ -100,32 +100,7 @@ To enable termination place the two jumpers on the TERM block. Termination shoul
## Troubleshooting ## Troubleshooting
### Review the LOG.txt https://github.com/erichelgeson/BlueSCSI/wiki/Troubleshooting
There should logs that indicate what BlueSCSI did at startup.
### LED Flashes on and off 3x
This indicates BlueSCSI could not find any files on the SD card or communicate with the SD card.
Ensure your files are named properly (case sensitive) following the naming convetion in the readme.
If you recived a kit - verify all connections and that the outside of the SD holder is grounded.
### LED Flashes on and off 5x
Format your card with https://www.sdcard.org/downloads/formatter/
### Slow performance
Ensure you are using a good SD card. SD card quality can vary widely.
Format your card as ExFat - users have seen quite a jump in performance.
### (Kit Only) Verify you are not using a bad fake
https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]
### Older Version Specific Troubleshooting ### Older Version Specific Troubleshooting