Macintosh-HW/BlueSCSI
1
0
Fork 0
mirror of https://github.com/erichelgeson/BlueSCSI.git synced 2024-10-31 18:04:27 +00:00
Code Issues Projects Releases Wiki Activity

MODE SELECT supports CDROM 512/2048 sector toggle

Browse Source 
CDROM devices return a DBD properly
CDROM Error Mode Page has a default retry of 1
More streamlining of debug logging
This commit is contained in:
Troy 2022-08-17 21:15:15 -04:00
parent 32453b9886
commit 94a5e711e3
1 changed files with 39 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
src/BlueSCSI.cpp
View File

@ -1169,7 +1169,7 @@ void loop()
}
}
LOG("Command:");
LOG("CMD:");
SCSI_PHASE_CHANGE(SCSI_PHASE_COMMAND);
// Bus settle delay 400ns. The following code was measured at 20ns before REQ asserted. Added another 380ns. STM32F103.
asm("nop;nop;nop;nop;nop;nop;nop;nop");// This asm causes some code reodering, which adds 270ns, plus 8 nop cycles for an additional 110ns. STM32F103
@ -1210,7 +1210,7 @@ void loop()
LOG(m_id);
LOG(":LUN ");
LOG(m_lun);
LOGN("");
LOG(" ");
// HDD Image selection
if(m_lun >= NUM_SCSILUN)
@ -1272,18 +1272,18 @@ void loop()
LED_OFF();
Status:
LOGN("Sts");
LOG("S TS:"); LOGHEX(m_sts);
SCSI_PHASE_CHANGE(SCSI_PHASE_STATUS);
// Bus settle delay 400ns built in to writeHandshake
writeHandshake(m_sts);
LOGN("MsgIn");
LOG(" MI:"); LOGHEX(m_msg);
SCSI_PHASE_CHANGE(SCSI_PHASE_MESSAGEIN);
// Bus settle delay 400ns built in to writeHandshake
writeHandshake(m_msg);
BusFree:
LOGN("BusFree");
LOGN(" BF ");
m_isBusReset = false;
//SCSI_OUT(vREQ,inactive) // gpio_write(REQ, low);
//SCSI_OUT(vMSG,inactive) // gpio_write(MSG, low);
@ -1547,7 +1547,7 @@ byte onModeSense(SCSI_DEVICE *dev, const byte *cdb)
memset(m_buf, 0, length);
if(!dbd && dev->m_type != SCSI_DEVICE_OPTICAL) {
if(!dbd) {
byte c[8] = {
0,//Density code
(byte)(dev->m_blockcount >> 16),
@ -1668,6 +1668,7 @@ byte onModeSense(SCSI_DEVICE *dev, const byte *cdb)
case SCSI_SENSE_MODE_READ_WRITE_ERROR_RECOVERY:
m_buf[a + 0] = SCSI_SENSE_MODE_READ_WRITE_ERROR_RECOVERY;
m_buf[a + 1] = 0x06;
m_buf[a + 3] = 0x01; // Retry Count
a += 0x08;
if(pageCode != SCSI_SENSE_MODE_ALL) break;
@ -1739,6 +1740,12 @@ byte onModeSense(SCSI_DEVICE *dev, const byte *cdb)
writeDataPhase(length < a ? length : a, m_buf);
return SCSI_STATUS_GOOD;
}
void setBlockLength(SCSI_DEVICE *dev, uint32_t length)
{
dev->m_blocksize = dev->m_rawblocksize = length;
dev->m_blockcount = dev->m_fileSize / dev->m_blocksize;
}
byte onModeSelect(SCSI_DEVICE *dev, const byte *cdb)
{
@ -1770,6 +1777,32 @@ byte onModeSelect(SCSI_DEVICE *dev, const byte *cdb)
//0 0 0 8 0 0 0 0 0 0 2 0 0 2 10 0 1 6 24 10 8 0 0 0
//I believe mode page 0 set to 10 00 is Disable Unit Attention
//Mode page 1 set to 24 10 08 00 00 00 is TB and PER set, read retry count 16, correction span 8
// Requested change of blocksize
// Only supporting 512 or 2048 for optical devices
if(dev->m_type == SCSI_DEVICE_OPTICAL)
{
// hacky for now
for(unsigned i = 0; i < length; i++)
{
if(m_buf[i] == 8)
{
// found the block length so we know the offset
// for the desired block length
switch(m_buf[i + 7])
{
// 512
case 2: setBlockLength(dev, 512);
break;
// 2048
case 8: setBlockLength(dev, 2048);
break;
}
break;
}
}
}
#if DEBUG > 0
for (unsigned i = 0; i < length; i++) {
LOGHEX(m_buf[i]);LOG(" ");