Macintosh-HW/BlueSCSI
1
0
Fork 0
mirror of https://github.com/erichelgeson/BlueSCSI.git synced 2024-12-21 21:29:19 +00:00
Code Issues Projects Releases Wiki Activity

Move troubleshooting to readme

Browse Source
This commit is contained in:
Eric Helgeson 2021-05-11 10:09:43 -05:00
parent c0b323cbea
commit ba78e9b06c
2 changed files with 23 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
README.adoc
View File

@ -117,22 +117,37 @@ To enable termination place the two jumpers on the TERM block. Termination shoul
## Troubleshooting
### Check Log Files
### Review the LOG.txt
If your device is not working - check the `LOG.txt` in the root of the SD card.
There should logs that indicate what BlueSCSI did at startup.
### Performance is slower than expected
### LED Flashes on and off 3x
Use ExFat instead of FAT32
This indicates BlueSCSI could not find any files on the SD card or communicate with the SD card.
Try a different SD card. Cheap/old SD cards can affect performance.
Ensure your files are named properly (case sensitive) following the naming convetion in the readme.
### Version Specific
If you recived a kit - verify all connections and that the outside of the SD holder is grounded.
### LED Flashes on and off 5x
Format your card with https://www.sdcard.org/downloads/formatter/
### Slow performance
Ensure you are using a good SD card. SD card quality can vary widely.
Format your card as ExFat - users have seen quite a jump in performance.
### (Kit Only) Verify you are not using a bad fake
https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]
### Older Version Specific Troubleshooting
<<docs/troubleshooting-1.0-b.adoc,Version 1.0-b>>
<<docs/troubleshooting-1.0-c.adoc,Version 1.0-c>>
## Hardware Versions
### 1.1-a (in testing)

24
docs/troubleshooting-1.0-c.adoc
View File

@ -1,24 +0,0 @@
# Troubleshooting 1.0-c
:toc: macro
## Review the LOG.txt
There should logs that indicate what BlueSCSI did at startup.
## Green LED Flashes on and off 3x
This indicates BlueSCSI could not find any files on the SD card or communicate with the SD card.
Ensure your files are named properly (case sensitive) following the naming convetion in the readme.
If you recived a kit - verify all connections and that the outside of the SD holder is grounded.
## Slow performance
Ensure you are using a good SD card. SD card quality can vary widely.
Format your card as ExFat - users have seen quite a jump in performance.
## (Kit Only) Verify you are not using a fake
https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]