BlueSCSI/platformio.ini
Eric Helgeson a06e840e39 Upgrade SdFat from 2.0.6 to 2.2.0
No change in perf
2022-07-26 18:28:19 -05:00

95 lines
2.5 KiB
INI

; PlatformIO Project Configuration File https://docs.platformio.org/page/projectconf.html
[platformio]
default_envs = STM32F1
[env]
framework = arduino
lib_deps =
greiman/SdFat @ 2.2.0
upload_protocol = stlink
; Different gcc versions produce much different binaries in terms of speed.
platform_packages = platformio/toolchain-gccarmnoneeabi@1.90301.200702
build_flags =
-DARDUINO_GENERIC_STM32F103C
-DARDUINO_LIB_DISCOVERY_PHASE
-DARDUINO=10813
-DARDUINO_ARCH_STM32
-DDEBUG_LEVEL=DEBUG_NONE
-O2
-D BUILD_TAGS="\"\""
build_unflags =
-Os
-DARDUINO_ARCH_STM32F1
upload_flags = -c set CPUTAPID 0
[env:STM32F1]
platform = ststm32
board = genericSTM32F103C8
board_build.mcu = stm32f103c8t6
board_build.core = maple
[env:STM32F1-XCVR]
extends = env:STM32F1
build_flags = ${env.build_flags}
-DXCVR
-D BUILD_TAGS="\"-XCVR\""
[env:STM32F1-USB-128MHz]
# Max overclock for STM32
# Can use for APM32F1 as well.
extends = env:STM32F1-USB
board_build.f_cpu = 128000000L
build_flags = ${env.build_flags}
-D BUILD_TAGS="\"-USB-128MHz\""
[env:STM32F1-USB-96MHz]
# Slight overclock for STM32
# Use for APM32F1's - it's default clock is 96MHz and runs unstable at 72MHz(STM32F1's default)
extends = env:STM32F1-USB
# Explicilty define the multiplier as maple only handles a few cases.
build_flags = ${env.build_flags}
-D BUILD_TAGS="\"-USB-96MHz\""
-D PIO_FRAMEWORK_ARDUINO_ENABLE_CDC
-D USBCON
-D USBD_VID=0x0483
-D USB_MANUFACTURER="Unknown"
-D USB_PRODUCT="\"BLUEPILL_F103C8\""
-D HAL_PCD_MODULE_ENABLED
-DBOARD_RCC_PLLMUL=RCC_PLLMUL_12 #96000000L
# TODO: Find out why USB build flags get trampled when extending an extended env.
[env:STM32F1-USB]
platform = ststm32
board = genericSTM32F103C8
board_build.mcu = stm32f103c8t6
board_build.core = maple
framework = arduino
lib_deps =
greiman/SdFat @ 2.2.0
upload_protocol = dfu
; Different gcc versions produce much different binaries in terms of speed.
platform_packages = platformio/toolchain-gccarmnoneeabi@1.90301.200702
build_flags =
-D BUILD_TAGS="\"-USB\""
-D PIO_FRAMEWORK_ARDUINO_ENABLE_CDC
-D USBCON
-D USBD_VID=0x0483
-D USB_MANUFACTURER="Unknown"
-D USB_PRODUCT="\"BLUEPILL_F103C8\""
-D HAL_PCD_MODULE_ENABLED
-DARDUINO_GENERIC_STM32F103C
-DARDUINO_LIB_DISCOVERY_PHASE
-DARDUINO=10813
-DARDUINO_ARCH_STM32
-DDEBUG_LEVEL=DEBUG_NONE
-O2
build_unflags =
-Os
-DARDUINO_ARCH_STM32F1
upload_flags = -c set CPUTAPID 0
; [env:debug]
; build_type = debug
; debug_tool = stlink