NuBusFPGA/nubus-to-ztex-gateware/nubus_cpld.v
Romain Dolbeau 15a6d9cfc1 typo
2022-11-01 11:34:06 +01:00

110 lines
4.4 KiB
Verilog

module nubus_cpld
(
// Control
input nubus_oe, // disable all 5v drivers
input tmoen, // tm output enable
input nubus_master_dir, // direction of signals, i.e. are we in master mode
// NuBus (input to CPLD)
input [3:0] id_n_5v, // ID of this card
input reset_n_5v, // reset from NuBus, forwarded
input clk_n_5v, // clk from NuBus
input clk2x_n_5v, // clk from NuBus90
// Spares
input fpga_to_cpld_clk, // unused (extra line from FPGA to CPLD, pin is a clk input)
input fpga_to_cpld_signal, // rqstoen (extra line from FPGA to CPLD)
inout fpga_to_cpld_signal_2, // unused (extra line from FPGA to CPLD)
// NuBus (output to FPGA)
output [3:0] id_n_3v3, // nubus ID of this card to FPGA
output reset_n_3v3, // nubus reset to FPGA
output clk_n_3v3, // nubus clk to FPGA
output clk2x_n_3v3, // nubus90 clk to FPGA
// NuBus Arbiter
input arbcy_n, // enable arbitter
input [3:0] arb_n_5v, // NuBus arbiter's lines
output [3:0] arb_o_n, // NuBus arbiter's control lines
output grant, // Grant access
// Cycle Control (NuBus two-way)
inout tm0_n_3v3, // nubus tm0 to/from FPGA
input tm0_n_5v, // tm0 from/to NuBus
output tm0_o_n, // start from NuBus
inout tm1_n_3v3, // nubus tm1 to/from FPGA
input tm1_n_5v, // tm1 from/to NuBus
output tm1_o_n, // start from NuBus
output tmx_oe_n, // start from NuBus
inout tm2_n_3v3, // nubus tm2 to/from FPGA
input tm2_n_5v, // tm2 from/to NuBus
output tm2_o_n, // start from NuBus
output tm2_oe_n, // start from NuBus
inout start_n_3v3, // start to/from FPGA
input start_n_5v, // start from NuBus
output start_o_n, // start from NuBus
output start_oe_n, // start from NuBus
inout ack_n_3v3, // ack from/to FPGA
inout ack_n_5v, // ack from NuBus
output ack_o_n, // ack to NuBus
output ack_oe_n, // ack OE NuBus
// Master Request (OC)
input rqst_n_5v, // rqst from NuBus; needs monitoring before driving
inout rqst_n_3v3, // rqst from/to FPGA
output rqst_o_n // rqst to NuBus
);
// placeholder to make pretend we use the signals
assign fpga_to_cpld_signal_2 = fpga_to_cpld_clk;
// placeholders
assign clk2x_n_3v3 = clk2x_n_5v;
assign tm2_n_3v3 = tm2_n_5v;
assign tm2_o_n = 0;
assign tm2_oe_n = 1;
// clock and pure in -> out pass_through are always on
assign clk_n_3v3 = clk_n_5v;
assign id_n_3v3 = id_n_5v;
assign reset_n_3v3 = reset_n_5v;
// ~nubus_master_dir-controlled signals
//assign start_o_5v = nubus_oe ? 'bZ : ( nubus_master_dir ? start_n_3v3 : 'bZ); // master out
assign start_o_n = nubus_oe ? 1 : ( nubus_master_dir ? start_n_3v3 : 1); // master out
assign start_oe_n = nubus_oe ? 1 : ( nubus_master_dir ? 0 : 1); // master out
assign start_n_3v3 = nubus_oe ? 'bZ : (~nubus_master_dir ? start_n_5v : 'bZ); // master in
// rqst_o_n is always driven (the 74lvt125 wired as open collector will convert 1 to Z) and is active low
assign rqst_o_n = nubus_oe ? 1 : (~fpga_to_cpld_signal ? rqst_n_3v3 : 1); // master out
assign rqst_n_3v3 = nubus_oe ? 'bZ : ( fpga_to_cpld_signal ? rqst_n_5v : 'bZ); // master in
//assign rqst_n_3v3 = rqst_n_5v; // master in, always on
//assign ack_o_5v = nubus_oe ? 'bZ : ((nubus_master_dir ^ ~tmoen) ? ack_n_3v3 : 'bZ); // slave out/in
assign ack_o_n = nubus_oe ? 1 : (( ~tmoen) ? ack_n_3v3 : 1); // slave out/in
assign ack_oe_n = nubus_oe ? 1 : (( ~tmoen) ? 0 : 1); // slave out/in
assign ack_n_3v3 = nubus_oe ? 'bZ : (( tmoen) ? ack_n_5v : 'bZ); // slave out/in
//assign tm0_n_5v = nubus_oe ? 'bZ : ((nubus_master_dir ^ ~tmoen) ? tm0_n_3v3 : 'bZ); // slave out/in
//assign tm1_n_5v = nubus_oe ? 'bZ : ((nubus_master_dir ^ ~tmoen) ? tm1_n_3v3 : 'bZ); // slave out/in
assign tm0_o_n = nubus_oe ? 1 : (( ~tmoen) ? tm0_n_3v3 : 1); // slave out/in
assign tm1_o_n = nubus_oe ? 1 : (( ~tmoen) ? tm1_n_3v3 : 1); // slave out/in
assign tmx_oe_n = nubus_oe ? 1 : (( ~tmoen) ? 0 : 1); // slave out/in
assign tm0_n_3v3 = nubus_oe ? 'bZ : (( tmoen) ? tm0_n_5v : 'bZ); // slave in/out
assign tm1_n_3v3 = nubus_oe ? 'bZ : (( tmoen) ? tm1_n_5v : 'bZ); // slave in/out
nubus_arbiter UArbiter
(
.idn(id_n_5v),
.arbn(arb_n_5v),
.arbon(arb_o_n),
.arbcyn(arbcy_n),
.grant(grant)
);
endmodule // nubus_cpld