RASCSI/src/raspberrypi/devices/disk_track_cache.h

102 lines
2.9 KiB
C
Raw Normal View History

Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
//---------------------------------------------------------------------------
//
// X68000 EMULATOR "XM6"
//
// Copyright (C) 2001-2006 (ytanaka@ipc-tokai.or.jp)
// Copyright (C) 2014-2020 GIMONS
//
// XM6i
// Copyright (C) 2010-2015 isaki@NetBSD.org
//
// Imported sava's Anex86/T98Next image and MO format support patch.
// Comments translated to english by akuker.
//
// [ DiskTrack and DiskCache ]
//
//---------------------------------------------------------------------------
#pragma once
#include "filepath.h"
// Number of tracks to cache
Fix simple SonarCloud issues (#834) * Fixing SonarCloud issues, first round * Fixing SonarCLoud issues, next round * Fixing SonarQube issues, next round * Fixed warning * Replaced empty constructors/destructors with = default; * Fixed warning * Replaced new * Use constants instead of macros * Use structured binding declarations * Use init statements for if * Use string views * Use enum class, use using instead of typedef * Fixed more SonarCloud warnings * Replaced redundant/duplicate types with auto * Devlared methods const * Memory management update * Fixed warning * Added missing const * Improved RaScsiResponse memory management * Improved memory management * Improved memory management * Replaced macros by constants, removed unused constants * Made member private * Fixed warning * Added comment * Fixed shadowing warnings * Cleanup * Cleanup * Cleanup * Fixed shadowing warning * Removed unused code * Fixed more warnings * Removed obsolete casts * Fixed warnings * Removed unused field * Removed library not needed by rasctl * Include cleanup * Updated platform check for better compatibility * Improved check for invalid option. This prevents rasctl to break on macos. * Updated option check * Fixed typo * Added TODO * Removed macro * Scope update * Replaced macro * Added TODO, update memory management * Fixed typo * Replaced NULL by nullptr * Use more structured bindings * Added TODO * Use calloc instead of mallco to not need memset * Fixed warnings * Fixed SonarQube initialization issues * Fixed warning * Cleaned up override/virtual/final * Fixed warnings * Constructor update * Fixed tests * Improved memory management * Added missing const * Added const * Fixed two bugs reported by SonarCloud * Fix SonarCloud hotspot * Fixed memory management * Memory management update * Addressing hotspot by using strncpy * Fixed SonarCloud issues * Fixed SonarQube issues * Added missing const * Added const * Added const * Suppress false positive * Added SonarQube suppressions for false positives * Added suppresoin * Fixed code smells * Reverted changes that is a SonarQube issue, but caused problems with -O3 * Removed TODO based on review
2022-09-07 14:38:42 +00:00
static const int CACHE_MAX = 16;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
class DiskTrack
{
private:
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
struct {
int track; // Track Number
int size; // Sector Size (8=256, 9=512, 10=1024, 11=2048, 12=4096)
int sectors; // Number of sectors(<0x100)
DWORD length; // Data buffer length
BYTE *buffer; // Data buffer
bool init; // Is it initilized?
bool changed; // Changed flag
DWORD maplen; // Changed map length
bool *changemap; // Changed map
bool raw; // RAW mode flag
off_t imgoffset; // Offset to actual data
} dt = {};
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
public:
DiskTrack() = default;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
~DiskTrack();
DiskTrack(DiskTrack&) = delete;
DiskTrack& operator=(const DiskTrack&) = delete;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
private:
friend class DiskCache;
void Init(int track, int size, int sectors, bool raw = false, off_t imgoff = 0);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
bool Load(const Filepath& path);
bool Save(const Filepath& path);
// Read / Write
bool ReadSector(BYTE *buf, int sec) const; // Sector Read
bool WriteSector(const BYTE *buf, int sec); // Sector Write
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
int GetTrack() const { return dt.track; } // Get track
};
class DiskCache
{
public:
// Internal data definition
Fix simple SonarCloud issues (#834) * Fixing SonarCloud issues, first round * Fixing SonarCLoud issues, next round * Fixing SonarQube issues, next round * Fixed warning * Replaced empty constructors/destructors with = default; * Fixed warning * Replaced new * Use constants instead of macros * Use structured binding declarations * Use init statements for if * Use string views * Use enum class, use using instead of typedef * Fixed more SonarCloud warnings * Replaced redundant/duplicate types with auto * Devlared methods const * Memory management update * Fixed warning * Added missing const * Improved RaScsiResponse memory management * Improved memory management * Improved memory management * Replaced macros by constants, removed unused constants * Made member private * Fixed warning * Added comment * Fixed shadowing warnings * Cleanup * Cleanup * Cleanup * Fixed shadowing warning * Removed unused code * Fixed more warnings * Removed obsolete casts * Fixed warnings * Removed unused field * Removed library not needed by rasctl * Include cleanup * Updated platform check for better compatibility * Improved check for invalid option. This prevents rasctl to break on macos. * Updated option check * Fixed typo * Added TODO * Removed macro * Scope update * Replaced macro * Added TODO, update memory management * Fixed typo * Replaced NULL by nullptr * Use more structured bindings * Added TODO * Use calloc instead of mallco to not need memset * Fixed warnings * Fixed SonarQube initialization issues * Fixed warning * Cleaned up override/virtual/final * Fixed warnings * Constructor update * Fixed tests * Improved memory management * Added missing const * Added const * Fixed two bugs reported by SonarCloud * Fix SonarCloud hotspot * Fixed memory management * Memory management update * Addressing hotspot by using strncpy * Fixed SonarCloud issues * Fixed SonarQube issues * Added missing const * Added const * Added const * Suppress false positive * Added SonarQube suppressions for false positives * Added suppresoin * Fixed code smells * Reverted changes that is a SonarQube issue, but caused problems with -O3 * Removed TODO based on review
2022-09-07 14:38:42 +00:00
using cache_t = struct {
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
DiskTrack *disktrk; // Disk Track
DWORD serial; // Serial
Fix simple SonarCloud issues (#834) * Fixing SonarCloud issues, first round * Fixing SonarCLoud issues, next round * Fixing SonarQube issues, next round * Fixed warning * Replaced empty constructors/destructors with = default; * Fixed warning * Replaced new * Use constants instead of macros * Use structured binding declarations * Use init statements for if * Use string views * Use enum class, use using instead of typedef * Fixed more SonarCloud warnings * Replaced redundant/duplicate types with auto * Devlared methods const * Memory management update * Fixed warning * Added missing const * Improved RaScsiResponse memory management * Improved memory management * Improved memory management * Replaced macros by constants, removed unused constants * Made member private * Fixed warning * Added comment * Fixed shadowing warnings * Cleanup * Cleanup * Cleanup * Fixed shadowing warning * Removed unused code * Fixed more warnings * Removed obsolete casts * Fixed warnings * Removed unused field * Removed library not needed by rasctl * Include cleanup * Updated platform check for better compatibility * Improved check for invalid option. This prevents rasctl to break on macos. * Updated option check * Fixed typo * Added TODO * Removed macro * Scope update * Replaced macro * Added TODO, update memory management * Fixed typo * Replaced NULL by nullptr * Use more structured bindings * Added TODO * Use calloc instead of mallco to not need memset * Fixed warnings * Fixed SonarQube initialization issues * Fixed warning * Cleaned up override/virtual/final * Fixed warnings * Constructor update * Fixed tests * Improved memory management * Added missing const * Added const * Fixed two bugs reported by SonarCloud * Fix SonarCloud hotspot * Fixed memory management * Memory management update * Addressing hotspot by using strncpy * Fixed SonarCloud issues * Fixed SonarQube issues * Added missing const * Added const * Added const * Suppress false positive * Added SonarQube suppressions for false positives * Added suppresoin * Fixed code smells * Reverted changes that is a SonarQube issue, but caused problems with -O3 * Removed TODO based on review
2022-09-07 14:38:42 +00:00
};
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
DiskCache(const Filepath& path, int size, uint32_t blocks, off_t imgoff = 0);
~DiskCache();
DiskCache(DiskCache&) = delete;
DiskCache& operator=(const DiskCache&) = delete;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
void SetRawMode(bool); // CD-ROM raw mode setting
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
// Access
bool Save() const; // Save and release all
bool ReadSector(BYTE *buf, uint32_t block); // Sector Read
bool WriteSector(const BYTE *buf, uint32_t block); // Sector Write
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
bool GetCache(int index, int& track, DWORD& serial) const; // Get cache information
private:
// Internal Management
void Clear(); // Clear all tracks
DiskTrack* Assign(int track); // Load track
Fix simple SonarCloud issues (#834) * Fixing SonarCloud issues, first round * Fixing SonarCLoud issues, next round * Fixing SonarQube issues, next round * Fixed warning * Replaced empty constructors/destructors with = default; * Fixed warning * Replaced new * Use constants instead of macros * Use structured binding declarations * Use init statements for if * Use string views * Use enum class, use using instead of typedef * Fixed more SonarCloud warnings * Replaced redundant/duplicate types with auto * Devlared methods const * Memory management update * Fixed warning * Added missing const * Improved RaScsiResponse memory management * Improved memory management * Improved memory management * Replaced macros by constants, removed unused constants * Made member private * Fixed warning * Added comment * Fixed shadowing warnings * Cleanup * Cleanup * Cleanup * Fixed shadowing warning * Removed unused code * Fixed more warnings * Removed obsolete casts * Fixed warnings * Removed unused field * Removed library not needed by rasctl * Include cleanup * Updated platform check for better compatibility * Improved check for invalid option. This prevents rasctl to break on macos. * Updated option check * Fixed typo * Added TODO * Removed macro * Scope update * Replaced macro * Added TODO, update memory management * Fixed typo * Replaced NULL by nullptr * Use more structured bindings * Added TODO * Use calloc instead of mallco to not need memset * Fixed warnings * Fixed SonarQube initialization issues * Fixed warning * Cleaned up override/virtual/final * Fixed warnings * Constructor update * Fixed tests * Improved memory management * Added missing const * Added const * Fixed two bugs reported by SonarCloud * Fix SonarCloud hotspot * Fixed memory management * Memory management update * Addressing hotspot by using strncpy * Fixed SonarCloud issues * Fixed SonarQube issues * Added missing const * Added const * Added const * Suppress false positive * Added SonarQube suppressions for false positives * Added suppresoin * Fixed code smells * Reverted changes that is a SonarQube issue, but caused problems with -O3 * Removed TODO based on review
2022-09-07 14:38:42 +00:00
bool Load(int index, int track, DiskTrack *disktrk = nullptr); // Load track
void UpdateSerialNumber(); // Update serial number
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
// Internal data
cache_t cache[CACHE_MAX] = {}; // Cache management
DWORD serial = 0; // Last serial number
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
Filepath sec_path; // Path
int sec_size; // Sector Size (8=256, 9=512, 10=1024, 11=2048, 12=4096)
int sec_blocks; // Blocks per sector
bool cd_raw = false; // CD-ROM RAW mode
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
off_t imgoffset; // Offset to actual data
};