RASCSI/python/ctrlboard/README.md

58 lines
1.7 KiB
Markdown
Raw Normal View History

# RaSCSI Control Board UI
## Run as standalone script for development / troubleshooting
```bash
# Make a virtual env named venv
$ python3 -m venv venv
# Use that virtual env in this shell
$ source venv/bin/activate
# Install requirements
$ pip3 install -r requirements.txt
$ python3 src/main.py
```
### Parameters
The script parameters can be shown with
```
python src/main.py --help
```
or
```
start.sh --help
```
Example:
```
$ python3 src/main.py --rotation=0 --transitions=0
```
## Run the start.sh script standalone
The start.sh script can also be run standalone, and will handle the venv creation/updating for you. It takes the same command line parameters in the following format:
```
$ ./start.sh --rotation=0 --transitions=0
```
### I2C baudrate and transitions
The available bandwidth for the display through I2C is limited. The I2C baudrate is automatically adjusted in
easy_install.sh and start.sh to maximize the possible baudrate, however, depending on the Raspberry Pi model in use, we found that for some
models enabling the transitions does not work very well. As a result, we have implemented a model detection for
the raspberry pi model and enable transitions only for the following pi models:
- Raspberry Pi 4 models
- Raspberry Pi 3 models
- Raspberry Pi Zero 2 models
The model detection can be overriden by adding a --transitions parameter to start.sh.
## Credits
### DejaVuSansMono-Bold.ttf
* Source: https://dejavu-fonts.github.io
* Distributed under DejaVu Fonts Lience (see DejaVu Fonts License.txt for full text)
### splash_start_\*.bmp, splash_stop_\*.bmp
* Drawn by Daniel Markstedt
* Distributed under BSD 3-Clause by permission from author (see LICENSE for full text)