RASCSI/src/raspberrypi/devices/ctapdriver.cpp

536 lines
14 KiB
C++
Raw Normal View History

//---------------------------------------------------------------------------
//
// SCSI Target Emulator RaSCSI (*^..^*)
// for Raspberry Pi
//
// Powered by XM6 TypeG Technology.
// Copyright (C) 2016-2020 GIMONS
// Copyright (C) akuker
//
// [ TAP Driver ]
//
//---------------------------------------------------------------------------
#include <unistd.h>
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
#include <arpa/inet.h>
#ifdef __linux__
#include <net/if.h>
#include <sys/ioctl.h>
#include <linux/sockios.h>
#endif
#include "os.h"
#include "ctapdriver.h"
#include "log.h"
#include "rasutil.h"
#include "exceptions.h"
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
#include <sstream>
2021-02-07 22:46:59 +00:00
#define BRIDGE_NAME "rascsi_bridge"
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
using namespace std;
using namespace ras_util;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
CTapDriver::CTapDriver()
{
m_hTAP = -1;
memset(&m_MacAddr, 0, sizeof(m_MacAddr));
m_pcap = NULL;
m_pcap_dumper = NULL;
}
//---------------------------------------------------------------------------
//
// Initialization
//
//---------------------------------------------------------------------------
static bool br_setif(int br_socket_fd, const char* bridgename, const char* ifname, bool add) {
struct ifreq ifr;
ifr.ifr_ifindex = if_nametoindex(ifname);
if (ifr.ifr_ifindex == 0) {
LOGERROR("Can't if_nametoindex: %s", strerror(errno));
return false;
}
strncpy(ifr.ifr_name, bridgename, IFNAMSIZ);
if (ioctl(br_socket_fd, add ? SIOCBRADDIF : SIOCBRDELIF, &ifr) < 0) {
LOGERROR("Can't ioctl %s: %s", add ? "SIOCBRADDIF" : "SIOCBRDELIF", strerror(errno));
return false;
}
return true;
}
static bool ip_link(int fd, const char* ifname, bool up) {
struct ifreq ifr;
strncpy(ifr.ifr_name, ifname, IFNAMSIZ-1); // Need to save room for null terminator
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
int err = ioctl(fd, SIOCGIFFLAGS, &ifr);
if (err) {
LOGERROR("Can't ioctl SIOCGIFFLAGS: %s", strerror(errno));
return false;
}
ifr.ifr_flags &= ~IFF_UP;
if (up) {
ifr.ifr_flags |= IFF_UP;
}
err = ioctl(fd, SIOCSIFFLAGS, &ifr);
if (err) {
LOGERROR("Can't ioctl SIOCSIFFLAGS: %s", strerror(errno));
return false;
}
return true;
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
static bool is_interface_up(const string& interface) {
string file = "/sys/class/net/";
file += interface;
file += "/carrier";
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
bool status = true;
FILE *fp = fopen(file.c_str(), "r");
if (!fp || fgetc(fp) != '1') {
status = false;
}
if (fp) {
fclose(fp);
}
return status;
}
Use vector for INQUIRY data, LUN list can have gaps, made methods const (#713) * Use vector for INQUIRY data, Inquiry() is const, moved EVPD check * Moved code * Fixed warning * Updated memcpy * Set length * Limit result vector size * Limit result buffer size * Inquiry() result buffer handling update * Logging update * Inquiry cleanup * NEC drive can also use PrimaryDevice::Inquiry() * NEC drive is never removable * Comment update * Bridge can also use PrimaryDevice::Inquiry() * Removed unused method argument * Comment update * Updated comment * Updated REQUEST SENSE buffer handling * Fixed typo * Fixed typo * Re-added comment * Updated additional length handling * Check for INQUIRY command support first * Added assertion * Size handling update * Renaming * Renaming * Removed obsolete casts * Cleanup * Moved error codes to scsi_defs namespace * Fixed ReadDefectData10 * Comment update * Updated buffer handling * Data type update * SendDiagnostic is now const * Removed obsolete forward declaration * removed unused enum * Reduced method visibility * Renaming * GetSendDelay() can be const * Made method const * Made method const * Added TODO * Use iterator * Made method const * Revert "Made method const" This reverts commit 38412b8dddbd1a60f34baa663a12d8285190e3a8. * No need to sort all set/maps * Do not sort all sets * Removed more unnecessary sorting * Cleaned up includes * More include cleanups * Updated REPORT LUNS * LUNs must not be consecutive anymore * Updated detaching of LUN * Improvements for devices without LUN 0 * Assume LUN 0 is always present * Enforce presence of LUN 0 * Updated error handling
2022-03-02 02:25:22 +00:00
bool CTapDriver::Init(const unordered_map<string, string>& const_params)
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
{
Use vector for INQUIRY data, LUN list can have gaps, made methods const (#713) * Use vector for INQUIRY data, Inquiry() is const, moved EVPD check * Moved code * Fixed warning * Updated memcpy * Set length * Limit result vector size * Limit result buffer size * Inquiry() result buffer handling update * Logging update * Inquiry cleanup * NEC drive can also use PrimaryDevice::Inquiry() * NEC drive is never removable * Comment update * Bridge can also use PrimaryDevice::Inquiry() * Removed unused method argument * Comment update * Updated comment * Updated REQUEST SENSE buffer handling * Fixed typo * Fixed typo * Re-added comment * Updated additional length handling * Check for INQUIRY command support first * Added assertion * Size handling update * Renaming * Renaming * Removed obsolete casts * Cleanup * Moved error codes to scsi_defs namespace * Fixed ReadDefectData10 * Comment update * Updated buffer handling * Data type update * SendDiagnostic is now const * Removed obsolete forward declaration * removed unused enum * Reduced method visibility * Renaming * GetSendDelay() can be const * Made method const * Made method const * Added TODO * Use iterator * Made method const * Revert "Made method const" This reverts commit 38412b8dddbd1a60f34baa663a12d8285190e3a8. * No need to sort all set/maps * Do not sort all sets * Removed more unnecessary sorting * Cleaned up includes * More include cleanups * Updated REPORT LUNS * LUNs must not be consecutive anymore * Updated detaching of LUN * Improvements for devices without LUN 0 * Assume LUN 0 is always present * Enforce presence of LUN 0 * Updated error handling
2022-03-02 02:25:22 +00:00
unordered_map<string, string> params = const_params;
if (params.count("interfaces")) {
LOGWARN("You are using the deprecated 'interfaces' parameter. "
"Provide the interface list and the IP address/netmask with the 'interface' and 'inet' parameters");
// TODO Remove the deprecated syntax in a future version
const string& interfaces = params["interfaces"];
size_t separatorPos = interfaces.find(':');
if (separatorPos != string::npos) {
params["interface"] = interfaces.substr(0, separatorPos);
params["inet"] = interfaces.substr(separatorPos + 1);
}
}
stringstream s(params["interface"]);
string interface;
while (getline(s, interface, ',')) {
this->interfaces.push_back(interface);
}
this->inet = params["inet"];
LOGTRACE("Opening Tap device");
// TAP device initilization
if ((m_hTAP = open("/dev/net/tun", O_RDWR)) < 0) {
LOGERROR("Can't open tun: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGTRACE("Opened tap device %d",m_hTAP);
// IFF_NO_PI for no extra packet information
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
char dev[IFNAMSIZ] = "ras0";
strncpy(ifr.ifr_name, dev, IFNAMSIZ);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGTRACE("Going to open %s", ifr.ifr_name);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
int ret = ioctl(m_hTAP, TUNSETIFF, (void *)&ifr);
if (ret < 0) {
LOGERROR("Can't ioctl TUNSETIFF: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGTRACE("Return code from ioctl was %d", ret);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
int ip_fd = socket(PF_INET, SOCK_DGRAM, 0);
if (ip_fd < 0) {
LOGERROR("Can't open ip socket: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
2021-02-07 22:46:59 +00:00
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
int br_socket_fd = socket(AF_LOCAL, SOCK_STREAM, 0);
if (br_socket_fd < 0) {
LOGERROR("Can't open bridge socket: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
2021-02-07 22:46:59 +00:00
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
// Check if the bridge has already been created
string sys_file = "/sys/class/net/";
sys_file += BRIDGE_NAME;
if (access(sys_file.c_str(), F_OK)) {
LOGINFO("%s is not yet available", BRIDGE_NAME);
2021-02-07 22:46:59 +00:00
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGTRACE("Checking which interface is available for creating the bridge");
string bridge_interface;
for (const string& interface : interfaces) {
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (is_interface_up(interface)) {
LOGTRACE("%s", string("Interface " + interface + " is up").c_str());
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
bridge_interface = interface;
break;
}
else {
LOGTRACE("%s", string("Interface " + interface + " is not available or is not up").c_str());
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
}
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (bridge_interface.empty()) {
LOGERROR("No interface is up, not creating bridge");
return false;
}
LOGINFO("Creating %s for interface %s", BRIDGE_NAME, bridge_interface.c_str());
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (bridge_interface == "eth0") {
LOGTRACE("brctl addbr %s", BRIDGE_NAME);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if ((ret = ioctl(br_socket_fd, SIOCBRADDBR, BRIDGE_NAME)) < 0) {
LOGERROR("Can't ioctl SIOCBRADDBR: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
LOGTRACE("brctl addif %s %s", BRIDGE_NAME, bridge_interface.c_str());
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (!br_setif(br_socket_fd, BRIDGE_NAME, bridge_interface.c_str(), true)) {
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
}
else {
string address = inet;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
string netmask = "255.255.255.0";
size_t separatorPos = inet.find('/');
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (separatorPos != string::npos) {
address = inet.substr(0, separatorPos);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
int m;
if (!GetAsInt(inet.substr(separatorPos + 1), m) || m < 8 || m > 32) {
LOGERROR("Invalid CIDR netmask notation '%s'", inet.substr(separatorPos + 1).c_str());
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
// long long is required for compatibility with 32 bit platforms
long long mask = pow(2, 32) - (1 << (32 - m));
char buf[16];
sprintf(buf, "%lld.%lld.%lld.%lld", (mask >> 24) & 0xff, (mask >> 16) & 0xff, (mask >> 8) & 0xff,
mask & 0xff);
netmask = buf;
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
}
LOGTRACE("brctl addbr %s", BRIDGE_NAME);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if ((ret = ioctl(br_socket_fd, SIOCBRADDBR, BRIDGE_NAME)) < 0) {
LOGERROR("Can't ioctl SIOCBRADDBR: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
struct ifreq ifr_a;
ifr_a.ifr_addr.sa_family = AF_INET;
strncpy(ifr_a.ifr_name, BRIDGE_NAME, IFNAMSIZ);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
struct sockaddr_in* addr = (struct sockaddr_in*)&ifr_a.ifr_addr;
if (inet_pton(AF_INET, address.c_str(), &addr->sin_addr) != 1) {
LOGERROR("Can't convert '%s' into a network address: %s", address.c_str(), strerror(errno));
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
struct ifreq ifr_n;
ifr_n.ifr_addr.sa_family = AF_INET;
strncpy(ifr_n.ifr_name, BRIDGE_NAME, IFNAMSIZ);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
struct sockaddr_in* mask = (struct sockaddr_in*)&ifr_n.ifr_addr;
if (inet_pton(AF_INET, netmask.c_str(), &mask->sin_addr) != 1) {
LOGERROR("Can't convert '%s' into a netmask: %s", netmask.c_str(), strerror(errno));
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
LOGTRACE("ip address add %s dev %s", inet.c_str(), BRIDGE_NAME);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (ioctl(ip_fd, SIOCSIFADDR, &ifr_a) < 0 || ioctl(ip_fd, SIOCSIFNETMASK, &ifr_n) < 0) {
LOGERROR("Can't ioctl SIOCSIFADDR or SIOCSIFNETMASK: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
return false;
}
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGTRACE("ip link set dev %s up", BRIDGE_NAME);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (!ip_link(ip_fd, BRIDGE_NAME, true)) {
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
2021-02-07 22:46:59 +00:00
}
else
{
LOGINFO("%s is already available", BRIDGE_NAME);
2021-02-07 22:46:59 +00:00
}
LOGTRACE("ip link set ras0 up");
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (!ip_link(ip_fd, "ras0", true)) {
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
LOGTRACE("brctl addif %s ras0", BRIDGE_NAME);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (!br_setif(br_socket_fd, BRIDGE_NAME, "ras0", true)) {
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
// Get MAC address
LOGTRACE("Getting the MAC address");
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
ifr.ifr_addr.sa_family = AF_INET;
if ((ret = ioctl(m_hTAP, SIOCGIFHWADDR, &ifr)) < 0) {
LOGERROR("Can't ioctl SIOCGIFHWADDR: %s", strerror(errno));
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
close(m_hTAP);
close(ip_fd);
close(br_socket_fd);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
return false;
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGTRACE("Got the MAC");
// Save MAC address
memcpy(m_MacAddr, ifr.ifr_hwaddr.sa_data, sizeof(m_MacAddr));
close(ip_fd);
close(br_socket_fd);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
LOGINFO("Tap device %s created", ifr.ifr_name);
return true;
}
void CTapDriver::OpenDump(const Filepath& path) {
if (m_pcap == NULL) {
m_pcap = pcap_open_dead(DLT_EN10MB, 65535);
}
if (m_pcap_dumper != NULL) {
pcap_dump_close(m_pcap_dumper);
}
m_pcap_dumper = pcap_dump_open(m_pcap, path.GetPath());
if (m_pcap_dumper == NULL) {
LOGERROR("Can't open pcap file: %s", pcap_geterr(m_pcap));
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
throw io_exception("Can't open pcap file");
}
LOGTRACE("%s Opened %s for dumping", __PRETTY_FUNCTION__, path.GetPath());
}
void CTapDriver::Cleanup()
{
int br_socket_fd = -1;
if ((br_socket_fd = socket(AF_LOCAL, SOCK_STREAM, 0)) < 0) {
LOGERROR("Can't open bridge socket: %s", strerror(errno));
} else {
LOGDEBUG("brctl delif %s ras0", BRIDGE_NAME);
if (!br_setif(br_socket_fd, BRIDGE_NAME, "ras0", false)) {
LOGWARN("Warning: Removing ras0 from the bridge failed.");
LOGWARN("You may need to manually remove the ras0 tap device from the bridge");
}
close(br_socket_fd);
}
// Release TAP defice
if (m_hTAP != -1) {
close(m_hTAP);
m_hTAP = -1;
}
if (m_pcap_dumper != NULL) {
pcap_dump_close(m_pcap_dumper);
m_pcap_dumper = NULL;
}
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
if (m_pcap != NULL) {
pcap_close(m_pcap);
Configurable block size, controller/device cleanup, dispatchers per device, bridge setup (#203) * Use foreach * Renaming * Revert "Renaming" This reverts commit b0554b9c0a052e282625a4565d429313af2b3cc7. * Manpage updates * Removed obsolete assertions * Replaced QWORD by uint64_t and removed respective typedef * Removed LPCSTR typedef * Removed LPCTSTR typedef * Removed LPTSTR typedef * Renamed SCSI command interface classes * Renamed xm6.h to rascsi.h * Moved interface classes to new interfaces subfolder * Added include * Fixed compilation issues of 64 bit Ubuntu * Renaming * Sort block sizes * protobuf interface description update * Fixed handling for sector size for non-disk devices * Fixed typo * Fixed comment * Translate code commends into English, removing redundant ones (#214) * Comment update * For other bridge interfaces than eth0 IP address and netmask can be provided * Added special rule for testing on x86 PCs * Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * Comment update * Removed unused typedefs * Added special rule for testing on x86 PCs * Comment update * Comment update * Updated capacity calculation * Updated protobuf interface to signal parameter support * Simplified protobuf interface * Updated rasctl server info output * Updated logging * protobuf interface has to return block only if it is configurable * Updated block size handling * Improved error message if ID is already in use * Removed typedef * Renamed protobuf interface method * Renaming * Use protobuf::Messsge instead of protobuf::MessageLite * default_image_folder cannot be an empty string, removed obsolete check * Logging update * Made some error messages more concise * Removed magic constant * Updated error message * Comment update * Names of removable media drives must be constant and not contain the capacity * Improved DeviceFactory error handling * More error handing improvements * Interface comment update * Pass interface list to ctapdriver when creating bridge * Moved initialization code * Updated rasctl server information output * Improved handling of MO capacities * Renaming * Comment update * Reject inserting a medium when there is already a medium present (eject first) * Save list of files in use before dry-run * Updated rasctl server info message * Comment update * Fixed typo * Cleaned list handling * Sort devices list by ID *and unit* * Improved block size check * Fixed issue with missing method in old Raspberry Pi OS protobuf implementation * Updated error message * Improve and fix bugs with saving&loading configuration files for rascsi-web (#218) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Removed unused structures, code and type cleanup * Use unscoped enums for commands * SASI Format opcode is 0x06, not 0x04 (see comment in code) * Removed duplicate command * Code review, data type updates * Data type updated, use #pragma once * Logging update * Renaming * Renaming * Removed duplicate code * Renaming * Refactoring * Removed TODO * Updated logging * Comment update * Comment update * Updated GetEventStatusNotification * Removed goto * Options -h and -v do not require to be the root user (fixes issue #166) * Updated error messages and exception handling * Added number of supported LUNs to protobuf interface * Updated list handling of protobuf interface * Comment update * Improved error handling * Added missing return statement * Allow empty device list * Fixed unnecessary detach_all() when config file isn't read (#221) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Protecting/unprotecing a non-ready medium is considered not possible * Updated error message * Extract detaching all devices, add parameter list support * Comment update * Fixed typos * Restore files in use if dry-run fails * Feature configurable reserved id for rascsi-web (#223) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior. * Make it possible to reserve multiple scsi ids in the web ui * Added support for reserved IDs * rasctl output update * Re-ordered logging * Logging update * Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Updated string to integer conversions * Improved string to integer conversion * Move string to integer conversion to rasutil * Removed unused variable * Fixed detach, which did not remove the filename from the filenames set * Re-added folder to gitignore * Set/Display patch version * Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226) * Translate code commends into English, removing redundant ones * - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h - Removed some redundant comments where the context is obvious from the code - Fixed a few typos and mistakes * - Store only file path and name to configuration csv - Strip known non-file path strings when reading configuration csv (backwards compatibility) - Validate SCSI ID before attempting to attach a device * Add comment and TODO * Partial translation of cfilesystem.h * Move csv read/write logic into file_cmd.py * Load default.csv on rascsi-web startup * Add rudimentary error handling to config loading/saving * Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods. * Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids * Fix error handling when failing to open a csv file for read or write * Run detach_all() only after succeeding to open a file for reading * Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well. * Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui * Updated interface comment * Accept daynaport as legacy type * Fixed typo * Remove file from the list of files in use when ejected with a SCSI command * Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT * Fixed error handling * Fixed filepath handling * Added more device shortcuts to rasctl * Fixed function declaration * Extraced ATTACH and DETACH * Extracted INSERT * Simplified ProcessCmd * Comment update * Fixed memory leak * Log information on whether a new device is protected or read-only * Updated errro message * Updated error message * Initialize private fields * Updated rasctl help message * Added DEVICE_INFO to protobuf interface * Improved error handling * DEVICE_INFO supports device list * Updated server info handling * Unified result handling with oneof, all commands now return PbResult * A result can always return a message string * Fixed typo * Simplified sending of commands * Improved error handling * Removed unused code * Updated error handling * Code cleanup * Comment update * Updated logging * Updated error handling * Updated handling of removed status for devices without image file support * Comment update * Fixed typo * Updated logging * Updated parameter handling * Updated setting default interfaces * Revert "Updated setting default interfaces" This reverts commit 210abc775d9a79dd0c631cf3877966a2923f4d5b. * Revert "Updated parameter handling" This reverts commit 35302addd59f5f5e1cc032888ba32dcbb426a846. * rascsi supports reserving IDs * Updated help message * Replaced BOOL by bool * Logging update * Logging update * Added default parameters to device properties * Return parameters a device was set up with * Improved device initialization * Updated default parameter handling * Updated default parameter handling * Fixed typo * Comment updates * Comment update * Manage default parameters in the respective device * Do not pass empty parameter string * Added supports_params flag * Made comparisons more consistent * Updated error handling * Updated exception handling * Renaming * Comment update * NEC sectors size must be 512 bytes * Updated logging * Updated vendor name handling * Updated handling of media loading/unloading * Added stoppable property and stopped status * Made MO stoppable * Removed duplicate code * Removed duplicate code * Copy read-only property * Renaming * Removed duplicate code, added START/STOP * Improved default parameter handling * Updated load/eject handling * Logging update * Fixed typo * Verified START/STOP UNIT * Updated logging * Updated status handling * Updated status handling * More status handling updates * Logging update * Made instance fields local variables * Made disk_t private * Made some data structures private * Fixed ARM compile issue * Fixed ctapdriver initialization issue * Reset read-only status when opening an image file * Made logging more consistent * Updated log level * Log load/eject on error level for testing * Revert "Log load/eject on error level for testing" This reverts commit d35a15ea8e520517d25e1e1054ad1aeda9f85f2e. * Assume drive is not ready after having been stopped * Updated status handling * Fixed typo * Rebuild manpage * Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header) * Removed unused code * Enum data type update * Removed duplicate range check * Removed duplicate code * Removed more duplicate code * Logging update * SCCD sector size was not meant to be configurable * Updated configurable sector size properties * Removed assertion * Improved error handling * Updated error handling * Re-added special error handling only relevant for SASI * Added TODOs * Comment update * Added override modifier * Removed obsolete debug flag (related code was not called) * Comment and logging updates * Removed obsolete try/catch * Revert "Removed obsolete try/catch" This reverts commit 39ca12d8b153c706316ce79f4fec65c9abc60024. * Comment update * Removed duplicate code * Updated error messages, use more foreach loops * Updated logging * Logging update * README update * Added block_count * Evaluate block size when inserting a media * rasctl display capacity if available * Info message update * Added missing product name to NEC vital product data * MO block size depends on capacity only * Extended property/status display * Property display update * Updated error handling * (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations Co-authored-by: Daniel Markstedt <markstedt@gmail.com> Co-authored-by: Tony Kuker <akuker@gmail.com>
2021-09-15 01:23:04 +00:00
m_pcap = NULL;
}
}
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
bool CTapDriver::Enable(){
int fd = socket(PF_INET, SOCK_DGRAM, 0);
LOGDEBUG("%s: ip link set ras0 up", __PRETTY_FUNCTION__);
bool result = ip_link(fd, "ras0", true);
close(fd);
return result;
}
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
bool CTapDriver::Disable(){
int fd = socket(PF_INET, SOCK_DGRAM, 0);
LOGDEBUG("%s: ip link set ras0 down", __PRETTY_FUNCTION__);
bool result = ip_link(fd, "ras0", false);
close(fd);
return result;
}
void CTapDriver::Flush(){
LOGTRACE("%s", __PRETTY_FUNCTION__);
while(PendingPackets()){
(void)Rx(m_garbage_buffer);
}
}
void CTapDriver::GetMacAddr(BYTE *mac)
{
ASSERT(mac);
memcpy(mac, m_MacAddr, sizeof(m_MacAddr));
}
//---------------------------------------------------------------------------
//
// Receive
//
//---------------------------------------------------------------------------
bool CTapDriver::PendingPackets()
{
struct pollfd fds;
ASSERT(m_hTAP != -1);
// Check if there is data that can be received
fds.fd = m_hTAP;
fds.events = POLLIN | POLLERR;
fds.revents = 0;
poll(&fds, 1, 0);
LOGTRACE("%s %u revents", __PRETTY_FUNCTION__, fds.revents);
if (!(fds.revents & POLLIN)) {
return false;
}else {
return true;
}
}
// See https://stackoverflow.com/questions/21001659/crc32-algorithm-implementation-in-c-without-a-look-up-table-and-with-a-public-li
uint32_t crc32(BYTE *buf, int length) {
uint32_t crc = 0xffffffff;
for (int i = 0; i < length; i++) {
crc ^= buf[i];
for (int j = 0; j < 8; j++) {
uint32_t mask = -(crc & 1);
crc = (crc >> 1) ^ (0xEDB88320 & mask);
}
}
return ~crc;
}
//---------------------------------------------------------------------------
//
// Receive
//
//---------------------------------------------------------------------------
int CTapDriver::Rx(BYTE *buf)
{
ASSERT(m_hTAP != -1);
// Check if there is data that can be received
if (!PendingPackets()) {
return 0;
}
// Receive
DWORD dwReceived = read(m_hTAP, buf, ETH_FRAME_LEN);
if (dwReceived == (DWORD)-1) {
LOGWARN("%s Error occured while receiving an packet", __PRETTY_FUNCTION__);
return 0;
}
// If reception is enabled
if (dwReceived > 0) {
// We need to add the Frame Check Status (FCS) CRC back onto the end of the packet.
// The Linux network subsystem removes it, since most software apps shouldn't ever
// need it.
int crc = crc32(buf, dwReceived);
buf[dwReceived + 0] = (BYTE)((crc >> 0) & 0xFF);
buf[dwReceived + 1] = (BYTE)((crc >> 8) & 0xFF);
buf[dwReceived + 2] = (BYTE)((crc >> 16) & 0xFF);
buf[dwReceived + 3] = (BYTE)((crc >> 24) & 0xFF);
Refactoring, device handling extensions, additional settings, improved error handling, 64 bit OS support, fixed issues (#184) * Device type unification, support of removable media * Added support for .hdr extension * Removable flag cleanup * Manpage update * Enriched PbOperation with PbDevice * Added file size to PbImageFile * Added device list support * Set image_file * Make remote interface more robust by ignoring SIGPIPE * Return status only once * Fixed typo * Error handling update * When starting rascsi parse everything before attaching devices * Added dry run mode * Comment update * Updated logging * Added Device base class, Disk class inherits from it * Renaming * Use vectors for controllers and disks, as preparation for using maps * Updated file support handling * Comment update * DaynaPort and Bridge inherit from Device instead of Disk * ProcessCmd() now works with devices instead of disks * Renaming * Added DeviceFactory * Improved factory * Comment update * protected disk_t * Code cleanup, added translations * Device name can be set for rascsi * rasctl can set device name * Manpage update * Manpage update * Formatting update * Check for missing name * Initialize fd * Initialize type * Fixed string length issue * Updated capacity formatting * Fixed typo * Split PbDevice into device and device definition * Added TODO * Renaming * Renaming * Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore) * Fixed compile-time issue * Removed unused Append mode, updated read-only handling * Type handling and manpage update * Cleanup * rasctl parser cleanup * Review * Constructor update * Added .hdr (SCRM) support to web interface, tested web interface * Default folder can be set remotely * Removed deprecated operation * DETACH supports all parameters in order to detach all devices * include cleanup * Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical * INFO is default log level * Exception renaming * Updated GetPaddedName() * Inheritance update * Added BlockDevice class * Removed unused code * Updated typedefs * Revert "Updated typedefs" This reverts commit 546b46215a4d9b65067a11698e59ab1123cc6d64. * Removed unused code * Fixed warnign * Use standard C++ integer types, use streams to resolve printf data type issues * Added TODOs * Added TODO * Renaming * Added TODO * Added TODO * Improved dry-run * Code cleanup * Updated handling of unknown options, code review and cleanup * Manpage update * Added PrimaryDevice * Include cleanup * Added pure virtual methods * Comment updates * Split rasutil * Replaced some occurrences of BOOL * Removed obsolete RASCSI definition in xm6.h * Removed unused code, updated TODOs, replaced BOOL * Added capacity check (issue #192) * Fixed (most likely) https://github.com/akuker/RASCSI/issues/191 * Fixed wrong error messages * For root the default image folder is /home/pi/images, updated error handling * Dynaport code review * Improved error handling * Implemented READ CAPACITY(16) * Comment update * Commands can be 16 bytes long * Implemented READ/WRITE/VERIFY(16) * Comment update * Renamed method to reflect the name of the respective SCSI command * Do not created devices during dryRun * Fixed padding of SCSIHD_APPLE vendor and product * Initial implementation * Updated ReportLuns * Byte count update * Fixed typo * Finalized REPORT LUNS * Removed TODO * Updated TODO * TODO update * Updated device factory * Comment update * 64 bit update, tested on Ubuntu 64 bit system * Removed assertion * SCSI hard disks always have Apple specific mode pages (resolves issue #193) * Error messsage update, 64 bit cleanup * Reduced streams usage * Updated handling of device flags * MOs are protectable * Removed duplicate error code handling * Removed duplicate code * Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194) * Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings * HD must set removable device bit if the media is removable * Removed duplicate logging * Updated daynaport additional length * Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac. * EnableInterface should not always return TRUE * Updated Inquiry * Updated LUN handling * Replaced incorrect free by delete * Updated comments and write-protection handling * Made default HD name consistent * STATUS_NOERROR is default * Fixed Eject * More eject handling updates * Manpage updates * Logging update * Changed debug level * Logging update * Log capacity of all media types * Logging update * Encapsulated disk.blocks * Encapsulated sector size * Added overrides * Added more overrides * Fixed error message * Fixed typos * Fixed logging * Added logging * Use PrimaryDevice when calling Inquiry * Comment update * Changed default buffer size for testing * Reverted last change * Removed debug output * De-inlined methods because optimized code did not work with them inlined * Web interface can attach Daynaport again * Improved handling of read-only hard disks * Fixed issue with "all" semantics of DETACH * rasctl supports adding removable media devices without providing a filename * Removed unused flag in PbDeviceDefinition * Updated rasctl output for ecjected media (resolves issue #199) * Validate default folder name when changing default folder
2021-08-21 21:45:30 +00:00
LOGDEBUG("%s CRC is %08X - %02X %02X %02X %02X\n", __PRETTY_FUNCTION__, crc, buf[dwReceived+0], buf[dwReceived+1], buf[dwReceived+2], buf[dwReceived+3]);
// Add FCS size to the received message size
dwReceived += 4;
}
if (m_pcap_dumper != NULL) {
struct pcap_pkthdr h = {
.caplen = dwReceived,
.len = dwReceived,
};
gettimeofday(&h.ts, NULL);
pcap_dump((u_char*)m_pcap_dumper, &h, buf);
LOGTRACE("%s Dumped %d byte packet (first byte: %02x last byte: %02x)", __PRETTY_FUNCTION__, (unsigned int)dwReceived, buf[0], buf[dwReceived-1]);
}
// Return the number of bytes
return dwReceived;
}
//---------------------------------------------------------------------------
//
// Send
//
//---------------------------------------------------------------------------
int CTapDriver::Tx(const BYTE *buf, int len)
{
ASSERT(m_hTAP != -1);
if (m_pcap_dumper != NULL) {
struct pcap_pkthdr h = {
.caplen = (bpf_u_int32)len,
.len = (bpf_u_int32)len,
};
gettimeofday(&h.ts, NULL);
pcap_dump((u_char*)m_pcap_dumper, &h, buf);
LOGTRACE("%s Dumped %d byte packet (first byte: %02x last byte: %02x)", __PRETTY_FUNCTION__, (unsigned int)h.len, buf[0], buf[h.len-1]);
}
// Start sending
return write(m_hTAP, buf, len);
}